Iron Man Arc Reactor Clock Is A Stylish Piece

July 12, 2024 by 4 Comments

Iron Man was the film that kicked off the Marvel craze, and is widely regarded to be better than a lot of the movies that followed. If you’re a big fan of the OG, you’re probably already drowning in Iron Man helmets and arc reactor doo-dads, but here’s one more for you. After all, you probably don’t have an arc reactor clock yet.

The build comes to us from [jerome95]. It starts with an off-the-shelf ring of addressable LEDs, which serves as the basic defining dimension for the project. The ring gets a 3D printed support structure and some non-functional copper coils to complete the basic “arc reactor” look. Inside the center sits a small 7-segment display which displays the time under the command of an ESP32. It uses a network time server so it’s always on the dot.  Meanwhile, if you’re not a fan of the 7-segment version, you can always try the OLED variant of the build instead.

It’s not a complicated build; that could have been easily achieved, though. The builder could have displayed the time by making the LEDs flash different colors, instead of using a 7-segment display. However, that would have made a far more confounding clock. As it is, this design would make an excellent gift for any Marvel fan. Particularly those that acknowledge the supremacy of the film that started it all.

Continue reading “Iron Man Arc Reactor Clock Is A Stylish Piece” →

Hackaday Podcast Episode 279: Solar Flares, Flash Cells, And Free Airline WiFi

July 12, 2024 by 1 Comment

Get your weekly fix of great hacks with your guides, Elliot Williams and Al Williams. This week, the guys talk about hacking airline WiFi, vanishing cloud services, and hobbies adjacent to hacking, such as general aviation. Things go into the weird and wonderful when the topic turns to cavity filters, driving LEDs with a candle, and thermite.

Quick hacks? Everything from vintage automated telescopes to home fusion reactors and ham radio mobile from a bicycle. Then there’s the can’t miss articles about the Solar Dynamics Observatory and an explainer about flash memory technology.

Check out the links below and leave your favorite hack of the week in the comments below!

As always, this week’s episode is freeze-dried as an MP3 for your convenience.

Where to Follow Hackaday Podcast

Places to follow Hackaday podcasts:

Continue reading “Hackaday Podcast Episode 279: Solar Flares, Flash Cells, And Free Airline WiFi” →

A batarang-shaped keyboard with a Batmobile that we wish was a mouse.

Holy Keyboard Case, Batman!

July 12, 2024 by 4 Comments

Whoever thought a keyboard could look so sinister? Well, [rain2] aka [AffectionateWin7178], that’s who. Vengeance is the sixth keyboard they’ve designed, and let’s just say we wouldn’t mind seeing the other five.

This is a takeoff of Zazu, a custom case printed for the monoblock split designed by [AlSaMoMo]. A friend of [rain2] made a ZMK PCB for the Zazu about a month ago, and they dreamed up the case design together. Among our first questions were of course, how do you type without those bat wings digging into your palms? But evidently, they are designed not to get in the way at all during use.

We particularly like the gold skirt around the edge which joins the two printed halves. It goes nicely with the bank vault elements like the dial around the trackball and the five-way switch that resembles a handle. And yeah, we wish the Batmobile was a mouse, too. While it seems that [rain2] hasn’t released the STLs for the case, you can find the ZMK Zazu repo on GitHub. Happy designing! As always, let us know what you come up with.

Here’s another BAT keyboard you might be interested in.

This Week In Security: Blast-RADIUS, Gitlab, And Plormbing

July 12, 2024 by 6 Comments

The RADIUS authentication scheme, short for “Remote Authentication Dial-In User Service”, has been widely deployed for user authentication in all sorts of scenarios. It’s a bit odd, in that individual users authenticate to a “RADIUS Client”, sometimes called a Network Access Server (NAS). In response to an authentication request, a NAS packages up the authentication details, and sends it to a central RADIUS server for verification. The server then sends back a judgement on the authentication request, and if successful the user is authenticated to the NAS/client.

The scheme was updated to its current form in 1994, back when MD5 was considered a cryptographically good hash. It’s been demonstrated that MD5 has problems, most notably a chosen-prefix collision attack demonstrated in 2007. The basis of this collision attack is that given two arbitrary messages, it is possible to find a pair of values that, when appended to the end of those messages, result in matching md5 hashes for each combined message. It turns out this is directly applicable to RADIUS.
Continue reading “This Week In Security: Blast-RADIUS, Gitlab, And Plormbing” →

DIY Spacer Increases FDM Flow Rate For Faster, Better Printing

July 12, 2024 by 8 Comments

The host of problems to deal with when you’re feeling the need for FDM speed are many and varied, but high on the list is figuring out how to melt filament fast enough to accommodate high flow rates. Plus, the filament must be melted completely; a melty outside and a crunchy inside might be good for snacks, but not for 3D printing. Luckily, budget-minded hobbyists can build a drop-in booster to increase volumetric flow using only basic tools and materials.

[aamott]’s booster, which started life as a copper screw, is designed to replace the standard spacer in an extruder, with a bore that narrows as the filament gets closer to the nozzle to ensure that the core of the filament melts completely. Rather than a lathe, [aamott]’s main tool is a drill press, which he used to drill a 0.7 mm bore through the screw using a PCB drill bit. The hole was reamed out with a 10° CNC engraving bit, generating the required taper. After cutting off the head of the screw and cleaning up the faces, he cut radial slots into the body of the booster by threading the blade of a jeweler’s saw into the bore. The result was a bore wide enough to accept the filament on one end, narrowing to a (roughly) cross-shaped profile at the other.

Stacked up with a couple of knock-off Bondtech CHT nozzles, the effect of the booster was impressive — a 50% increase in flow rate. It’s not bad for a prototype made with simple tools, and it looks a little easier to build than [Stefan]’s take on the same idea.

Continue reading “DIY Spacer Increases FDM Flow Rate For Faster, Better Printing” →

Making SD Cards More Nostalgic With More Cartridge-ness

July 12, 2024 by 11 Comments

As practical SD cards are, they lack much of what made floppy disks and cartridges so awesome: room for art and a list of contents, as well as the ability to not be lost in shaggy carpet or down a pet’s gullet. In a fit of righteous nostalgia, [Abe] decided that he’d turn SD cards into cartridges in the best way possible, and amazingly managed to not only finish the project after two years, but also make it look snazzy enough to have come straight out of the 1980s. The resulting cartridges come both with fixed (256 MB) and removable micro SD card storage, which are mounted on a PCB that passively connects to pogo pins in the custom, 3D printed reader.

Front of an SD-card-turned-cartridge with adn without decal. (Credit: Abe's Projects, YouTube)
Front of an SD-card-turned-cartridge with and without decal. (Credit: Abe’s Projects, YouTube)

The inspiration for this project kicked in while [Abe] was working on a floppy drive conversion project called the Floppy8, which crammed an MCU into an external floppy drive along with a rough version of these SD card-based cartridges that used the physical card’s edge connector to connect with a micro SD slot inside the converted floppy drive. The problem with this setup was that alignment was terrible, and micro SD cards would break, along with a range of other quality of life issues.

Next, the SD card was put into a slot on the carrier PCB that featured its own edge connector. This improved matters, but the overly complicated (moving) read head in the reader turned out to be very unreliable, in addition to FDM printed parts having general tolerance and durability issues. Eventually a simplified design which takes these limitations in mind was created that so far seems to work just fine.

Although SD cards in cartridges are not a new idea, using them purely as a data carrier is far less common. One could argue about the practicality of turning a fingernail-sized micro SD card into something much larger, but in terms of aesthetics and handleability it definitely gets an A+.

Continue reading “Making SD Cards More Nostalgic With More Cartridge-ness” →

You Can Use A CRT As An Audio Amplifier Tube

July 11, 2024 by 36 Comments

When we talk about audio amplifier tubes, we’re normally talking about the glass little blobby things you might find in a guitar amplifier. We’re not normally talking about big ol’ color CRTs, but apparently they can do the job too. That’s what [Termadnator] is here to show us.

The CRT in question is a 14″ unit from a common garden variety Philips color TV.  [Termadnator] pulled out the TV’s original circuitry, and replaced much of it with his own. He had to whip up a high-voltage power supply with a 555 and a laptop power supply, along with a bunch of fake MOSFETs pressed into service. He also had to build his own Leyden jar capacitor, too. The specifics of converting it to audio operation get a bit messy, but fear not—[Termadnator] explains the idea well, and also supplies a schematic. Perhaps the coolest thing, though, is the crazy color pattern that appears on the display when it’s working as an amp.

Sound output isn’t exactly loud, and it’s a little distorted, too. Still, it’s amusing to see an entire TV instead doing the job of a single amplifier tube. Video after the break.

Continue reading “You Can Use A CRT As An Audio Amplifier Tube” →