Ghostly Images Appear Thanks To Projections On Fog

November 12, 2011 by 28 Comments

This wire-frame cube appears to be floating in mid-air because it actually is. This is a project which [Tom] calls a Laminar Flow Fog Screen. He built a device that puts out a faint amount of fog, which the intense light from a projector is able to illuminate. The real trick here is to get a uniformed fog wall, which is where the laminar part comes in. Laminar Flow is a phenomenon where fluids flow in a perfectly parallel stream, not allowing errant portions to introduce turbulence. This is a favorite trick with water.

[Tom’s] fog screen starts off with a PC fan to move the air. This airflow is smoothed and guided by a combination of a sponge, and multiple drinking straws. This apparatus is responsible for establishing the laminar flow, as the air picks up fog from an ultrasonic fogger along the way.

The only real problem here is that you want the projector shooting off into infinity. Otherwise, the projection goes right through the fog and displays on the wall, ruining the effect. Outdoor applications are great for this, as long as there’s no air movement to mess with your carefully established fog screen.

You can find a short test clip embedded after the break but there are other videos at the link above.

Continue reading “Ghostly Images Appear Thanks To Projections On Fog” →

Weekly Roundup 11/12/11

November 12, 2011 by 1 Comment

In case you missed them the first time around, here are our most popular posts from the past week:

In the #1 spot, we had a post about a tri-color laser projector that really is a well-done project. This projector sweeps the lasers around in vector mode using a pair or mirror galvanometers so would be perfect for playing asteroids in vivid full color!

In at #2 is a post about a PVC pipe gun that can shoot AA batteries at 600 batteries per minute!

Next up we have a post about the US military finding that due to Chinese counterfeit electronics, some of its weapon systems are defective. This has become a more serious issue in recent years. It has effected hackers too as shown in this Sparkfun post from last year.

After that, we had a post about a novel and somewhat scary way to post bulletins on a board without using tacks. How do they do that? By carefully using 20,000 Volts! Yikes. We’ll stick to tape next time we run out of tacks thank you very much.

Finally, we have one about a spot welder built out of some super capacitors and carbon rods. This one probably produces equally large sparks where it is welding and at the triggering mechanism!

You’ll Shoot Your Eye Out With This Laser-filled Tennis Ball

November 11, 2011 by 48 Comments

laser-ball

We love lasers, you love lasers…who doesn’t love them?

[Matt Leone] recently took his passion for lasers over the top and built a little something called the Laser Ball. Fed up with the deluge of of LED cubes floating around online, he says that the Laser Ball is the new sheriff in town – and we’re inclined to agree.

He bored a bunch of holes in a standard tennis ball, and fitted it with 14 red laser diodes. Before he installed the lasers into the ball he modified each with a small bit of diffraction grating to liven up the display. The lasers were connected to a Teensy micro controller, which was stuffed inside the ball along with a small rechargeable LiPo battery.

While the laser ball was pretty awesome already, [Matt] decided that it wasn’t finished just yet. Using an IR remote package from Adafruit, he added the ability to trigger the Laser Ball’s light patterns from afar. You know, just for kicks.

Be sure to check out the video below to see the Laser Ball in action!

via BuildLounge

Continue reading “You’ll Shoot Your Eye Out With This Laser-filled Tennis Ball” →

Dad Hacks Cerebral Palsy, Upgrades Son’s Lifestyle

November 11, 2011 by 44 Comments

[Jorge]’s son was born in 2004 after a troubling time in the womb. The son, [Ivo], wasn’t getting enough oxygen and unfortunately developed cerebral palsy. [Jorge] took it upon himself to improve his son’s life, so he got busy building some machinery for physical therapy. Today, [Ivo] is able to walk very well without the need for braces or other aids.

[Ivo] has a form of CP called Spastic quadriplegia. With [Ivo]’s disorder, his skeletal muscles are always tight meaning he’s nearly unable to walk. This can be treated with muscle relaxants such as Botox (yes, that Botox), but [Jorge] wanted to help out with his son’s physical therapy.

[Jorge] began preparing for [Ivo]’s physical therapy by building a “tripod” for him. This allows [Ivo] to stand while taking part in physical activities like ping-pong and golf. The second phase of the training was a modification to a cross-country skiing/elliptical trainer that allowed [Ivo] to practice walking. Today, [Ivo] is happily walking very well, a testament to his dad’s wishes that he has somewhat normal life. Some aluminum tubing helped, but we’re pinning this one on his dad.

Steampunk Wings: Bigger, Heavier, And Steampunkier

November 11, 2011 by 18 Comments

This pair of backpack-mounted wings was conceived after seeing the Angel/Archangel character in the movie X-Men: The Last Stand. They measure 14’6″ inches across, but they fold up so that the wearer can actually get around in them. The mechanism is built from MDF, using several layers of gears cut from the material as well as pieces that act as the skeleton for the appendages. This makes them look and work well, but adds a lot of weight as the project comes in at about 25 pounds.

The steampunk wings we saw a few days back were partly inspired by this set. But this pair is more true to the Steampunk concept, relying on pneumatics instead of electricity for motion. A pair of pneumatic rams originally made to cushion the closing of screen doors let the wearer automatically extend the unit. As you can see in the video after the break, this happens quickly and gracefully. They do have to be folded back up by hand, and we’d bet you need a second person to assist with this, but we could be wrong.

Continue reading “Steampunk Wings: Bigger, Heavier, And Steampunkier” →

LUFA Open Source USB Stack Now For NXP ARM Processors

November 11, 2011 by 13 Comments

Looks like the Lightweight USB Framework for AVRs (LUFA) has just been ported for ARM microcontrollers. NXP recently released a package for their LPC Cortex M3 family of ARM controllers. You won’t find a reference to LUFA on their nxpUSBlib description page (which we think is kind of sad), but if you grab a copy of the beta code the Version.h header file shows that it is indeed a port of the project. This is further backed up by the LUFA creator, [Dean Camera], who consulted with the NXP team doing the work.

The package provides an open-source USB stack that you can use in your projects as a USB host or USB device. We’re advocates of open source packages like this one as it makes it much easier for hobbyists to get help using the tools, and it allows the community to give back through bug fixes and feature additions.

We’ve highlighted a few LUFA projects, like this keyboard remapper and this AVR programmer. We’re looking to seeing the first set of NXP LUFA projects roll through!

[Thanks Johnny]

IPad 2 Gets A Home In Hacked IDJ Live Console

November 11, 2011 by 9 Comments

[DJ FileSpnR] did a number on this IDJ Live hardware to make room for an integrated iPad. Those that have seen the hardware before may not even recognize it. In stock condition the controller has two turn-table actuators with cross-fader control in between them. The iPad perches on top like a book, making it a fairly bulky setup.

In its hacked format, the device is much more mobile. The physical turntables have been removed, and the center console was moved to one side. This leaves just enough room to fit the iPad 2 (the original iPad is probably too thick for this to work). A cresent of the original turn table bezel has been retained to clamp the iPad in place, and to protect the dock connector at the same time. Now the touchscreen serves as turntable control, with physical sliders to the right which mange the cross-fading.

Check out the video after the break where the DJ explains his alterations and demonstrates the finished project.

Continue reading “IPad 2 Gets A Home In Hacked IDJ Live Console” →