Naval Academy’s AUV Team Project

auv1

[Daniel] sent us over to the blog for the Naval Academy’s Autonomous underwater vehicle entry for the AUVSI competition. You can follow along as they design, build, and test this years entry. It really looks like it would be fun to be the guy who gets to swim with them, like in the latest post in their blog. Their entry, named “Awkward turtle” can be seen above in orange, pictured with their 5th place winning previous entry.

Dell Mini 9 3G Install

dell

[Rob] sent in his Dell mini 9 3G install. He bought the Dell without the 3G option, but found that he really wanted it. He installed a mini pcie bracket and found a sim connector that matched the specs he needed. Apparently they use one that it rare as it uses the first pin to indicate whether or not there’s a card loaded. He pulled the mini pcie 3G card from a cheap USB adapter. After soldering it all in place and firing up OS X, he was able to connect, without issue. He says the reception wasn’t great, so he’ll need to add an antenna. This is similar to the process seen on the Acer aspire one 3G hack. Since you’re already in there, you might as well add a GPS while you’re at it.

Spatialized Umbrella

umbrella-1

Reader [Joe Saavedra] sent in his latest project: the spatialized umbrella. The base of each umbrella rib features an LED, speaker, and distance sensor. These are connected to an ATMega168 microcontroller running the Arduino environment. The IR sensor triggers a rain drop sound based on proximity. Shorter distances mean more droplets are played. The sounds are generated using a lookup table and the digital pins. You can see the demo video embedded below.

Using the Arduino environment without the associated board is part of another idea that [Joe] is working on. The MapDuino Project uses the standard Arduino hardware for programming, but then transfers the chip to a more barebones circuit in target project. They based their initial work on the ITP breadboard Arduino. Continue reading “Spatialized Umbrella” →

Tweenbots Rely On Human Help

tweenbots

[Kacie Kinzer] put together an interesting social experiment: Could a robot navigate purely by the help of strangers? She constructed an inexpensive Tweenbot robot that would drive in a straight line. A flag was attached to the top with a plea for help and a destination. Surprisingly, on the first run it was able to traverse through Washington Square Park in just 42 minutes with the help of 29 people. You can see a video of the first run below. This is part of [Kacie]’s thesis work at ITP and she has many other bots planned. While it’s a great demonstration of human kindness, there’s another lesson: If you don’t think your public project looks innocuous enough, draw a smiley face on it.

Continue reading “Tweenbots Rely On Human Help” →

HAL Suit Going Into Production

hal-suit

When we compiled our list of real life power suits last May, the HAL suit was being pitched as a $1000 a month rental. Cyberdyne has changed their tune for the better recently. Teports suggest that the first 400 unit run of powered exoskeletons will sell for $4200, less than a Segway. The suit can increase the wearer’s strength ten-fold and will run continuously for nearly three hours.

[via Engadget]

Googles Servers Revealed

googleservermedium

We’ve often wondered what kind of hardware the giant of the internet, Google, used to handle it’s data. They’ve recently revealed what their main workhorses are. It’s a custom motherboard made by Gigabyte with two processors, and eight RAM slots. The main point of interest on these is the fact that each server and piece of network equipment has it’s own battery backup. This may add a little money in the initial cost of the unit, but apparently it is a much more efficient way of handling power. Be sure to click over to the site and check out the shipping container setup that they use. Each container has 1,160 servers. They aren’t the only ones using this method. Microsoft has adopted it for their newer facilities and Sun has done some extensive testing on how these portable facilities handle earthquakes. You can see the quake test after the break.

Continue reading “Googles Servers Revealed” →

RGB 7 Segment Display

rgb7

[Markus] noticed a lack of 7 segment LED displays that could show RGB. Like any hacker, he sought to remedy this.  The solution he came up with was to basically remove all the electronics from the plastic body of the display. He then mounted new surface mount RGB LEDs in the correct places. This may be a bit messy, and definitely increased the footprint in this layout, but as you can see from the pictures on his site, the final result is quite nice. What uses can you think of for these?