Hackaday Prize 2023: Jumperless, The Jumperless Jumperboard

August 25, 2023 by Dave Rowntree 9 Comments

Jumperless is a jumperless breadboard with multicolored LED visualization of signals in real-time. Sounds like magic? This beautifully executed entry to the 2023 Hackaday Prize by [Kevin Santo Cappuccio] uses a boatload of CH446Q analog switch ICs to perform the interconnect between the Raspberry Pi Pico header and the jumper board (or breadboard if you prefer.)

This will add some significant resistance, but for low currents and digital logic levels, this should not be a major concern. Additionally, there are two DAC channels and four ADC channels to help break out of the digital world, which could make for some very interesting non-trivial applications.

The visualization of the Pico header signals is solved neatly with a tiny wishbone-shaped PCB that is reverse-mounted to the back of the main board to illuminate upwards. The masking of the labels is done by using copper to mask off the individual signals and solder mask to draw in the legends. This PCB-level hacking is simply wonderful to see. The PCBs are designed with KiCAD, the design files for which you can find here. It appears however that [Kevin] needed to have the spring clips for the jumper board custom-made, so you’d need to contact them if you needed to get some for a build.

On the software side of things, [Kevin] currently recommends using Wokwi, to run the Arduino stack applications and to perform the signal routing to the virtual jumper board. You can follow how it works internally here. A Python-based bridge application runs on the host computer, which takes care of programming the interconnects as they are constructed, which looking at the demo in the embedded video, appears to ‘just work.’

One word of caution though — the bridge app uses Python requests and Beautiful Soup to scrape the Wowki project page, which could potentially make it vulnerable to getting out-of-sync with updates, so hopefully [Kevin] will keep track of this and keep them in sync.

Need some breadboarding tips? We got you covered. Talking of bread, here’s an 8-bit TTL breadboard-based CPU in a breadbin.

Continue reading “Hackaday Prize 2023: Jumperless, The Jumperless Jumperboard” →

Hackaday Podcast 233: Chandrayaan On The Moon, Cyberdecks, Hackerspaces Born At A German Computer Camp

August 25, 2023 by Kristina Panos 5 Comments

This week, Editor-in-Chief Elliot Williams and Kristina Panos experimented with the old adage that brevity is the soul of wit. That’s right; this week, they’re all Quick Hacks, and that’s to make room for a special series of interviews that Elliot recorded at CCCamp with the pillars of US hackerspace creation. This one’s really special, do have a listen.

We still made room for the news this week: India launched Chandrayaan-3, which combines an orbiter, lander, and rover all in one. Then it’s on to the What’s That Sound results show, and while Kristina did not get it right, she did correctly identify it as being used in Whitney Houston’s “I Wanna Dance With Somebody”, as did one of the guessers who identified it as the cowbell sound from a Roland 808.

Then it’s on to the (quick) hacks, where we alternated for once just to keep things interesting. This week, Elliot is into 3D printing a clay extruder and then printing pottery with that, z-direction conductive tape, and the humble dipole antenna. Kristina is more into cyberdecks for the young and old, a reusable plant monitor, and 3D printing some cool coasters.

Check out the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Download and savor at your leisure.

Continue reading “Hackaday Podcast 233: Chandrayaan On The Moon, Cyberdecks, Hackerspaces Born At A German Computer Camp” →

This Week In Security: WinRAR, DNS Disco, And No Silver Bullets

August 25, 2023 by Jonathan Bennett 1 Comment

So what does WinRAR, day trading, and Visual Basic have in common? If you guessed “elaborate malware campaign aimed at investment brokers”, then you win the Internet for the day. This work comes from Group-IB, another cybersecurity company with a research team. They were researching a malware known as DarkMe, and found an attack on WinRAR being used in the wild, using malicious ZIP files being spread on a series of web forums for traders.

Among the interesting tidbits of the story, apparently at least one of those forums locked down the users spreading the malicious files, and they promptly broke into the forum’s back-end and unlocked their accounts. The vulnerability itself is interesting, too. A rigged zip file is created with identically named image file and folder containing a script. The user tries to open the image, but because the zip is malformed, the WinRAR function gets confused and opens the script instead.

Based on a user’s story from one of those forums, it appears that the end goal was to break into the brokers’ trading accounts, and funnel money into attacker accounts. The one documented case only lost $2 worth of dogecoin.

There was one more vulnerability found in WinRAR, an issue when processing malicious recovery volumes. This can lead to code execution due to a memory access error. Both issues were fixed with release 6.23, so if you still have a WinRAR install kicking around, make sure it’s up to date! Continue reading “This Week In Security: WinRAR, DNS Disco, And No Silver Bullets” →

Hackaday Prize 2023: Ubo Project: Building For Builders

August 24, 2023 by Dave Rowntree 6 Comments

The Ubo Pod by [Mehrdad Majzoobi] is a very highly polished extension pack and enclosure for the Raspberry Pi 4, which shows you how far you can go to turn a bare PCB into something that rivals the hardware offerings from Google and others. Gadgets like the Sonos speakers and Amazon or Google’s covert listening devices (aka Echo, Alexa, or whatever they’re branded as) are fun to play with. Still, the difficulty of hacking custom applications into them and god-forbid adding one’s own extension hardware, makes them fairly closed ecosystems. Add in the concerns of privacy and data security; they look less and less attractive the closer you look. Luckily the Raspberry Pi and its friends have improved the accessibility to the point where it’s positively easy to create whatever you want with whatever hardware you need, and to that end we think [Mehrdad] has done a splendid job.

The custom top PCB sits below the wooden top surface, hosting a central LCD display with push buttons located around it. Also sitting atop are some IR transmitters and receivers as well as RGB LEDs for the ring lighting. This top PCB acts as a RPi hat, and plugs into an RPi4 below, which then attaches to a side board via some PCB-mounted connectors, matching up with the USB and audio connectors. This board seems to act purely as an interconnect and form-factor adaptor allowing interfaces to be presented more conveniently without needing wires. This makes for a very clean construction. Extensive use of resin printing is shown, with lots of nice details of how to solve problems such as LED diffusion and bleeding. Overall, a very slick and well-executed project, that is giving us a few ideas for our own projects.

This type of project is commonplace on these fair pages, like this DIY smart speaker for example. With the supply of pi being still a little difficult to deal with, could you roll your own or get an alternative? What about just using your old mobile phone?

Smart Garbage Trucks Help With Street Maintenance

August 24, 2023 by Lewin Day 42 Comments

If you’ve ever had trouble with a footpath, bus stop, or other piece of urban infrastructure, you probably know the hassles of dealing with a local council. It can be incredibly difficult just to track down the right avenue to report issues, let alone get them sorted in a timely fashion.

In the suburban streets of one Australian city, though, that’s changing somewhat. New smart garbage trucks are becoming instruments of infrastructure surveillance, serving a dual purpose that could reshape urban management. Naturally, though, this new technology raises issues around ethics and privacy.

Continue reading “Smart Garbage Trucks Help With Street Maintenance” →

Mass Production 3D Printing Hack Chat

August 21, 2023 by Dan Maloney 13 Comments

Join us on Wednesday, August 23 at noon Pacific for the Mass Production 3D Printing Hack Chat with Gabe Bentz!

We’ll take a wild guess and say that right now, within arm’s length of wherever you’re reading this, there’s something that was produced by injection molding. Look around; it’s there someplace, and whatever it is, thousands or perhaps millions of other identical artifacts were produced along with it, all by squeezing hot plastic into intricately machined metal tools.

It’s not much of an overstatement to say that, for good or for ill, the world is made from injection-molded plastic. But not every product can support the often considerable up-front costs associated with injection molding. The tooling needed is often remarkably complicated and correspondingly expensive, and running the machines that actually do the molding is expensive and highly specialized. Unless you’re committed to making a lot of parts, injection molding might just be out of your league.

But does that mean that medium-sized runs of parts are out of luck? Not at all! Gabe Bentz, founder and CEO of Slant 3D, is passionate about filling the manufacturing void where injection molding is prohibitive, either by virtue of start-up costs or because the part design is just not possible to manufacture. His massive print farms are busy day in and day out cranking out parts for customers that otherwise couldn’t be made. So if you’ve ever wondered what it takes to run a print farm, and what kinds of design considerations make a part a candidate for mass production by 3D printing, drop by the chat and we’ll see what he has to tell us.

Our Hack Chats are live community events in the Hackaday.io Hack Chat group messaging. This week we’ll be sitting down on Wednesday, August 23 at 12:00 PM Pacific time. If time zones have you tied up, we have a handy time zone converter.

The Clathrate Gun Hypothesis: Unearthing Puzzles Of Warming Events Past

August 21, 2023 by Lewin Day 36 Comments

As the Earth continues to warm at a worrying rate, scientists continue to work to understand the processes and mechanisms at play. Amidst the myriad of climate-related theories and discussions, the clathrate gun hypothesis stands out not only for its intriguing name but for the profound implications it might have on our understanding of global warming events.

Delving into this hypothesis is akin to reading a detective novel written by Mother Earth, with clues hidden deep beneath the ocean and Arctic ice. It’s a great example of how scientists attempt to predict the future by unpicking the mysteries of the past.

Continue reading “The Clathrate Gun Hypothesis: Unearthing Puzzles Of Warming Events Past” →