Twittering Toilet

May 5, 2009 by Caleb Kraft 38 Comments

We wouldn’t want to let a week slip by without something new being made to twitter would we? This time it is a toilet. Don’t worry, they are sparing us the graphic details, it pretty much tweets every time it is flushed. As you can see in the picture above, they’re using an Arduino for the toilet/PC connection. If you really want to make something twitter, this might be a good starting point. It’s basically twittering every time a button is pushed. You can download the source code on the site as well as find a tutorial on Arduino basics.

[via astera]

Weather Monitoring

May 5, 2009 by Caleb Kraft 18 Comments

weather

This weather monitor can track pressure, temperature, and humidity and last several months on a pack of AA batteries. It has a PIC18f452 to control all the bits, as well as some fancy power management to get the most out of the batteries as possible. The screen displays the highest and lowest temperatures of the last 42 hours as well as having options to display all other sensor input, updated every minute or so. You can get the full schematic and parts list on the project site.

[via YourITronics]

IPhone Controlled TV Lift

May 2, 2009 by Caleb Kraft 14 Comments

pcb

[William] sent in this project where he’s using his iPhone to control his TV lift. He’s made a custom PCB with a pic18f122 microprocessor to communicate with the lift. He says it connects to the lift controls via a serial port. You can see a video of it in action after the break. We really think the shadow turning into an arrow is cool. That was a lucky accident.

Continue reading “IPhone Controlled TV Lift” →

The Bulbdial Clock Comes To Life

April 8, 2009 by Caleb Kraft 7 Comments

Evil Mad Scientist Laboratories has built the bulbdial clock, an idea originated by Ironic Sans. It’s basically a high definition indoor sundial. The LEDs arranged in a circle shine a light on the peg in the middle casting a shadow, just like a sundial. There are 3 colors of rings, allowing for hour, minute, and second shadows. This isn’t the first time that Ironic Sans has seen ideas come to reality. There were the pre pixelated reality show clothes and the sneaky histogram hidden message system. While it is a cute idea, it isn’t really new. People have been patenting this idea for a while.

Speech Controlled Garbage Can

April 5, 2009 by Jason Rollette 9 Comments

[youtube=http://www.youtube.com/watch?v=–BIlxKVCYk]

This speech controlled garbage can was sent in via the tip line by [Amnon]. The garbage can will come to you following a black line and stopping when it sees a cross in the line, then waits for another voice command. It can then return to where it belongs or go outside following the line. The system is based on a microchip PIC 18F4431 and uses three 18 volts cordless drill motors and their batteries as the power source. “In the near future the line sensors will be replaced with UV line sensors and the black line will be replaced with clear UV color.”

When you call the system “Pach Zevel ” (garbage can in Hebrew) the system go to standby and the LED’s light up. After the previous stage if you say “ELAY” (to me in Hebrew) it will drive on the black line till the first crossing.
This adds new meaning to taking the trash out.

Tweet-a-Watt Kits

March 26, 2009 by Caleb Kraft 41 Comments

[adafruit] wrote in to let us know that the Tweet-a-Watt is now available in kit form. While the plans have been available for a while, a kit is a welcomed addition. The kit doesn’t include the Kill-a-Watt monitor, but rather the XBee adapters and parts necessary to make it talk to your Arduino or computer. The kit is $90, while the Kill-a-Watt can be found for roughly $20.

Brew Fridge Thermostat

March 22, 2009 by Eliot 32 Comments

thermostat-1

Reader [Will R] sent in a thermostat mod for his brew fridge. His friends had found a perfectly fine bar refrigerator and wanted to repurpose it for brewing beer. A previous batch of microbrew had been mangled by the Australian heat so they wanted something that could maintain the perfect temperature. The fridge’s built-in thermostat wouldn’t rise above 5 degrees so they had to build their own. [Will] used a 10K NTC thermistor to measure the temperature. It’s connected to an ATtiny25 microcontroller that does the comparison and determines whether to turn on the compressor. He referenced SparkFun’s relay tutorial for the switching side. Although he didn’t etch a board for this project, the design file is included along with all the code on the project site.