arduino

2931 Articles

Thirty Year Old Pachinko Machine Meets An Arduino

June 14, 2011 by 8 Comments

When [Jim’s] thirty year old Pachinko machine started to freeze up and shorted out his computer’s graphics card he decided it was time to replace the old electronics with an Arduino. Originally the Pachinko machine ran off a 48 volt supply and control was achieved using about 20 relays, the random numbers were generated using some complex mechanical reels which we hope will find their way into a new project in the future.

All of this and the daunting amount of wire inside the machine have been replaced with an Arduino and an MP3 Shield for the sound effects, powered from a much safer 12 volts. The new machine runs just as you would expect a thirty year old machine to run, with all the grinding sounds and flickering lights. Check out the video after the break to see an overview of the project.

Continue reading “Thirty Year Old Pachinko Machine Meets An Arduino” →

Puppy POV: Four-legged Persistence Of Vision Display

June 14, 2011 by 7 Comments

puppy_pov

We see lots of persistence of vision projects around here, but we can’t recall any that involve a POV display facilitated by a living, breathing animal (humans aside, if you want to picky). [Michael] has a Miniature Pinscher that just loves to run and run…and run…in circles. Since she generally runs very fast and in large curves, he thought she would make a great POV device.

He has a small fleece “jacket” for his dog, and on it, he mounted a Lilypad Arduino, the associated power supply, and five bright white LEDs. Naturally, conductive thread was used to wire up the circuit, and after a bit of trial and error, things came together nicely.

With the vest complete, [Michael] unleashed his dog at the park, letting her run to her heart’s content. All the while, her vest was writing out [Cory Doctorow’s] “Makers” while he snapped some pictures.

We can’t think of a more appropriate text to write with LEDs in the night, but in the spirit of the book, we were hoping to see a circuit diagram or the project’s code posted. If he shares it, perhaps we could convince [Cory Doctorow] to run about the park in a vest, writing out [Michael’s] code in bright white LEDs!

Flashing Arduinos With A Zipit

June 13, 2011 by 17 Comments

zipit_arduino_flashing

[Giacomo] finds that every once in awhile, he needs to flash a sketch to an Arduino while on the go. While he doesn’t always carry his laptop with him, he almost certainly has his Zipit Z2 on hand. He prefers to use the Zipit because it’s tiny, it uses Debian, has built-in WiFi, and can run for about 5 hours before requiring a recharge. The only shortcoming is that the device lacks a serial port.

Following instructions we featured last year he added a serial port to his device, then built a small converter cable that allows him to connect it to virtually any Arduino. He says it only takes a moment to get avrdude up and running on the Zipit via apt-get, and once that’s done, he is in business. He wrote a short script that saves him from entering the flash command over and over, so the process couldn’t be simpler.

He does mention that since the Zipit does not have a DTR line, Arduino resetting must be done manually. For the convenience of flashing sketches from the palm of our hand, we can deal with that.

Check out the video below for a quick demonstration of his setup.

Continue reading “Flashing Arduinos With A Zipit” →

Hacking Cakes With LEDs, The Sequel!

June 12, 2011 by 27 Comments

A few weeks back we ran a piece about the convergence of making and baking in an attempt to create a cake festooned with working LEDs. The moral was that not every creative idea ends in victory, but we applauded the spirit it takes to post one’s goofs for the whole internet to see and to learn from.

[Craig]’s LED matrix proved unreliable…and the underlying cake didn’t fare much better, resembling that charred lump in the toaster oven in Time Bandits. The cakes-with-lights meme might have died right there if not for a fluke of association…

Continue reading “Hacking Cakes With LEDs, The Sequel!” →

Forearm-mounted GPS Uses LEDs To Light The Way Home

June 10, 2011 by 17 Comments

arm_mounted_gps

While some people can rely solely on memory and landmarks to find their way home, others need a bit more help. Consider Instructables user [_macke_] for instance.

Like other screenless GPS navigation devices we have seen, his “Find Home Detector” uses a GPS module to obtain his location, guiding the way home via a set of alternate indicators. In this case, he uses LEDs which are laid out like a compass rose. When [_macke_] is aimed toward his destination, the LED nearest to his fingertips lights up, letting him know he is on the right path. As he turns away from home, the other LEDs light, indicating the direction in which he should turn.

His forearm-mounted GPS navigator uses a LilyPad Arduino to control the system, much like others we have seen. It is connected to a GPS sensor and a compass module that work in concert to guide him home. The compass is responsible obtaining his heading information, and while it might look as if the LEDs that surround the module are pointing North, they are in fact indicating the heading of his destination instead.

It’s a cool little creation, and we can imagine it would be quite helpful if you happen to be walking home after a long night of drinking.

Be sure to check out the video below for a quick demonstration.

Continue reading “Forearm-mounted GPS Uses LEDs To Light The Way Home” →

ISS Lamp Tells You When To Look Up

June 9, 2011 by 5 Comments

[Nathan Bergey] came up with a really neat desk lamp that provides a visualization of when the International Space Station is overhead.

The lamp uses a Teensy board to light a few LEDs on the edge of a piece of plexiglass. Because the orbit of the ISS decays over time, the time that overhead passes will occur is unpredictable after a few months. A stand-alone satellite tracking lamp will eventually lose it’s accuracy, so [Nathan] needed to parse tracking data the internet. Since he couldn’t find an API to track the ISS, [Nathan] wrote a Python script to parse the data he found on Heavens Above. Everything on the computer runs in the Gnome panel and is passed to the Teensy over the USB connection. [Nathan] posted all of the code is posted on github.

It’s a really great build that provides a reminder that there are people in space, and we think this would be a great way to provide some notification of upcoming Iridium flares, or when it’s most likely to pick up some APRS packets.

Check out [Nathan]’s demo of his ISS lamp after the break.

Continue reading “ISS Lamp Tells You When To Look Up” →

RFID Shower Time Logger

June 9, 2011 by 17 Comments

Paul, as he describes himself, is “a student without a big budget,” which might have been part of the inspiration for this hack .  Paul wanted to see how much time he was spending under the shower each day, so came up with this monitoring device using the ever-awesome Arduino processor and a RFID tag that many of you are certainly familiar with.  One simply waves the tag in front of the reader to start the timer, and waves it again to stop it.

One may not, however, be familiar with “thingspeak” and “weatherspark“, two other important elements of this hack.  Thingspeak is “an open application platform designed to enable meaningful connection between things and people,” and was used to interface the weather data on weatherspark with the shower monitor.  This was to help figure out if there was a connection between outside temperature and the length of showers taken.

The results of this experiment should be interesting, so hopefully some will be published soon!

[via hackedgadgets]