Autonomous RC Car Navigates By Waypoints

June 16, 2013 by Mike Szczys 8 Comments

autonomous-rc-car

Check out this autonomous RC car which [Jason] built for the chipKIT design challenge. It’s been able to successfully navigate a planned route taking just a few waypoints as inputs.

Obviously this uses a chipKIT as the controller, the max32 to be specific. [Jason’s] write-up shows off all of the components of the design, but you’ll have to head over to his recently posted update to hear about the custom board he had spun to host them all. It starts with a GPS module, but that’s only accurate enough to give the rover the big picture. To handle getting from one waypoint to the next successfully he also included a gyroscope which provides very accurate orientation data, as well as optical encoders on the wheels for on-board distance traveled information.

We hope he’ll keep refining the design and make a trip to next year’s Autonomous Vehicle Competition.

Continue reading “Autonomous RC Car Navigates By Waypoints” →

Giving An RC Tank A Fire Control Computer

June 11, 2013 by Brian Benchoff 29 Comments

tank

[Vincent] plays around with remote control tanks, and even though his current model is a WWII-era armor piece, he’d still like modern accoutrements such as a fire control computer and laser sighting for his main gun. His latest project did just that (French, Google translation) with the help of an Arduino, a few modifications to the receiver, and an IR rangefinder.

The stock RC tank includes servos to move the turret and the requisite electronics to fire an Airsoft gun. The precision of the mechanical movements inside the turret weren’t very precise, though, so [Vincent] had to gear down the servos to turn large movements into slight adjustments. After that, he installed an IR rangefinder and laser diode onto the barrel that allowed the gun to sight a target and read its distance.

After some experimentation with the rangefinder and laser, [Vincent] plotted data from firing a few BBs at a whole bunch of distances and targets. The graph came out fairly linear, and after plugging this into a graphing calculator, he was able to find an equation that took into account the distance and angle so the Arduino-powered fire control computer would hit its mark.

The accuracy of the gun is very impressive, all things considered. [Vincent] is able to accurately fire BBs downrange and hit an 8×12 cm target at five meters. You can check out that action below.

Continue reading “Giving An RC Tank A Fire Control Computer” →

Remote Control Car That Packs Its Own Beretta

March 13, 2013 by Mike Szczys 82 Comments

remote-control-car-packs-a-beretta

We’ve never really thought to ourselves “This RC car is fun, but it really needs more handguns”. And if we did, it certainly would not be a built to undertake with students. But to each his own. [Jerod Michel] is a mathematician working in China. He recently built the project seen above with a group of students. Look closely and you’ll notice that the remote control car includes a remote control Beretta strapped to the side.

He doesn’t have a blog post about the project, but you can find a couple of images and his build instructions after the break. The firearm has a motor attached to the trigger that allows it to be fired by tapping into one of the extra channels on the RC car’s PCB. But you won’t just be firing blindly. The project also includes a video transmitter which can be viewed from an LCD screen mounted on top of the remote control unit. There’s even a laser sight that will show what you’re aiming at.

We wonder what the recoil of the firearm does to this light-weight vehicle?

Build Instructions (.txt file)

Continue reading “Remote Control Car That Packs Its Own Beretta” →

Adding Shoulder Buttons To An RC Transmitter

January 26, 2013 by Brian Benchoff 6 Comments

radio

[Gerard] does puppeteering and animatronics work, and to remotely control his creations and characters he uses an off-the-shelf remote control radio. It’s you basic 6-channel setup, but [Gerard] wanted a way to control eye blinks and other simple actions with the press of a button. Sure, he could use the toggle switches on his transmitter, but he wanted something that wouldn’t require turning a servo on and off again. To fix this problem, [Gerard] added shoulder buttons to his transmitter with only a little bit of soldering.

[Gerard]’s transmitter uses toggle switches to send a signal on channels five and six. To add his push buttons, he simply drilled a hole in the plastic enclosure, installed a pair of push buttons, and wired them in parallel to the toggle switches.

Now [Gerard] has momentary switches on channels five and six, perfect for making his creations blink. Since the buttons are wired in parallel with the switches, flicking the switches to the ‘on’ position in effect takes the button out of the circuit, just in case the transmitter gets jostled around.

Watermelon Air Boat

December 17, 2012 by Mike Szczys 35 Comments

We think you’ll turn a few heads in Central Park if you’re driving a water melon around when everyone else is piloting sailboats. This watermelon is both sea worthy and radio controlled thanks to the work which [Starting Electronics] put into it.

We used this image because it shows you what’s inside of the hull, but you don’t want to miss the thing motoring around an above-ground swimming pool in the clip after the break. The hollowed out shell is quite buoyant and has no problem staying afloat and upright with the addition of a propeller. The parts from a remote control airplane kit have been mounted on a wooden scaffold. This provides plenty of thrust with a servo motor moving turning the prop for directional control. There is no dagger board so the craft is a bit slow to respond to turns. But how responsive do you expect a floating melon to be?

Continue reading “Watermelon Air Boat” →

Dyson Engineers’ Hacks Traverse Robot Obstacle Course

December 3, 2012 by Mike Szczys 9 Comments

2012-dyson-challenge

These guys are all engineers who are employed by Dyson. They’re holding remote control creations made from Dyson parts. This time around the object of the challenge was to build a bot based on a the Dyson ball and race it through an obstacle course.

This sort of thing is right up our alley, but unlike the last time Dyson engineers shrugged off the daily grind to hack their own hardware, this doesn’t show off nearly enough of the festivities. Sure the pair of videos embedded after the break make a great trailer for the event, but we would love to have seen 90 seconds devoted to each of the entries. Alas, you do get to see most of the winning unit’s obstacle course run which includes a distance route, navigating through rough terrain, and negotiating a high path where falling off the edge is a real threat.

Maybe the engineers themselves will post details about their own builds like the contestants in Sparkfun’s autonomous vehicle contest do.

Continue reading “Dyson Engineers’ Hacks Traverse Robot Obstacle Course” →

RC Truck Has Working Windows, Steering Wheel, And Much More

November 27, 2012 by Mike Szczys 23 Comments

This truck is not simply a drive train and a radio module. Great care was taken to fabricate every part to work like a full-sized vehicle. NSFW WARNING: The forum on which the details have been posted is Russian and may have sidebar ads you don’t want on your screen at work. That being said, here’s the link (translated).

The build starts with a custom-made frame which looks like it’s aluminum. The gearbox is assembled from a huge number of parts, with power is transferred to the wheels through a proper differential. But hey, why not go that extra mile? The rope and hook hanging off the front are connected to a functional winch. The doors have windows that crank down, the steering wheel moves when the wheels turn, and where would this thing be without windshield wipers and headlights? Don’t miss the pair of demo videos after the break.

We remember seeing a pretty neat stirling engine come out of the same forums earlier this year.

Continue reading “RC Truck Has Working Windows, Steering Wheel, And Much More” →