Hackaday Links Column Banner

Hackaday Links: January 14, 2024

How long does it take a team of rocket scientists to remove two screws? When the screws they’re working on are keeping a priceless sample of asteroid safe, it’s about three months. That’s how long NASA has been working on the OSIRIS-REx sample return canister, which came back to Earth from asteroid Bennu back in September. The container was crammed full of asteroid bits, thanks in part to an overly energetic impact between the sample-collecting boom and Bennu. There was so much stuff that planetary scientists were able to recover about 70 grams of material that was covering the outside of the sealed container; this must have been a boon to the engineers, who got to figure out how to open the jammed cover of the container without anyone breathing down their necks for samples to study. The problem was a pair of stuck fasteners out of the 35 holding the lid on the container; the solution was far more complicated than a spritz of WD-40 and a little bit of heating with an oxy-acetylene torch. Engineers had to design two “clamp-like tools” and test them on a mock-up to make sure they wouldn’t contaminate the sample. We’d love to know more about these tools; trust us, we’ll be looking into this closely. If we find anything, a full article will be forthcoming.

Continue reading “Hackaday Links: January 14, 2024”

A Thoughtful Variety Of Projects And Failures

Our friends at [The Thought Emporium] have been bringing us delightful projects but not all of them warrant a full-fledged video. What does anyone with a bevy of small but worthy projects do? They put them all together like so many mismatched LEGO blocks. Grab Bag #1 is the start of a semi-monthly video series which presents the smaller projects happening behind the scenes of [The Thought Emporium]’s usual video presentations.

Solar eclipse? There are two because the first was only enough to whet [The Thought Emporium]’s appetite. Ionic lifters? Learn about the favorite transformer around the shop and see what happens when high voltage wires get too close. TEA lasers? Use that transformer to make a legitimate laser with stuff around your house. Bismuth casting? Pet supply stores may have what you need to step up your casting game and it’s a total hack. Failures? We got them too.

We first covered ionocraft (lifters) awhile back. TEA lasers have been covered before. Casting is no stranger to hackaday but [The Thought Emporium] went outside the mold with their technique.

Continue reading “A Thoughtful Variety Of Projects And Failures”

Camera Quadcopter Almost Hits Slalom Skiier

During the World Cup slalom skiing championship on Wednesday, ski champion [Marcel Hirscher] was nearly hit by an out-of-control camera drone, that crashed just behind him while filming during a run. Watch the (scary) video embedded after the break.

According to this article in Heise.de (Google Translate link), the pilot was accredited and allowed to fly the quad, but only over a corridor where no spectators were present. After the first couple of runs, apparently the pilot went off course and quite obviously lost control of the copter.

Continue reading “Camera Quadcopter Almost Hits Slalom Skiier”

Spark Plug Music

[youtube http://www.youtube.com/watch?v=92qql941DM4%5D

This is (video above) perhaps the most abstract way of playing sounds…ever. Yes, we’ve heard Hard Drive music and Obsolete technology bands, but [DJ Sures] brings us the first ever, spark plug instrument.

Much like Velcro and Teflon, the musical spark plug is claimed to be an accident. After testing energy use vs. spark power with his flare stack ignition controller, [DJ Sures] noticed that different frequencies could be produced. It was only a matter of reprogramming before death metal Twinkle Twinkle Little Star is heard. Now he just needs to refine it a bit and build a full stereo cabinet.

Homebrew MagSafe

[Freeload] sent us his custom MagSafe adapter build for laptops. MagSafe for those unaware is Apples (patented) power adapters that prevent damage to laptops when the cord is accidentally yanked from the socket. While we’ve seen some custom versions before of MagSafes they were usually bulky, ugly, and used a ton of unremovable glue. We really like [Freeload’s] because its quick, good looking, and the best part – completely removable without marks or damage. In short, an easy weekend project that could one day save your laptop.