Halloween Prop: Portable Black Light

October 2, 2009 by Caleb Kraft 6 Comments

blacklight

[Joshua] wrote in to show us this great Halloween tip. He wanted to take his 4 foot long black light along with him on Halloween. You can buy portable versions, but he realized he had enough parts laying around to slap together a portable one himself. He pulled the inverter from a scanner light and wired it up to a couple of 9 volt batteries. Knowing he would probably need a fresh set during the night, he actually wired in some extras with a switch to control which was powering the unit. We know this isn’t the best solution, but you could probably toss this together in just a few minutes.

Arduino DMX Controller

October 2, 2009 by Caleb Kraft 10 Comments

Arduino_DMX

This Arduino powered DMX controller came along at just the right time. We had shown you a project earlier that involved the DMX system and several commenters remarked on the price to get into DMX hardware. If you happen to have an Arduino around, you can build a DMX controller. He found a schematic for a DMX driver, and built some custom code to control it all. You can download his code on the project site.

Power Generating Backpack

October 1, 2009 by Caleb Kraft 28 Comments

[youtube=http://www.youtube.com/watch?v=UL_CUbN9F7E]

In the military, you have to carry tons of stuff. This is something we hear and see all the time. They are always trying to come up with ways to reduce the weight or quantity of the things that you bring into the field. This power generating backpack harnesses the natural up and down motion of your steps to produce power. This could reduce the amount of batteries carried into the field greatly. That’s what they say anyway, how many batteries do soldiers normally carry around? Aside from that point, we think it is pretty cool. We could see using this to keep our cell phone or GPS charged on long hiking and camping trips. You could also build something of your own to work similarly.

See Through Walls Via Wireless Network

October 1, 2009 by Caleb Kraft 22 Comments

Seeingthroughwalls

Researchers at the University of Utah have been able to detect movement in a room based on variations in wireless signals. Accurate to about a meter, they are using a 34 node wireless network to do their sensing. As a person moves, they change the signals, and can therefore be detected. They state one possible application being rescue workers deploying multiple wireless nodes around a building to find people located inside.

[via Gizmodo]

Microsoft Unveils Open Source Multi Core OS

October 1, 2009 by Caleb Kraft 62 Comments

group (Custom)

A new operating system, code named Barrelfish is being developed by Microsoft research labs and ETH Zurich in Switzerland. This operating system is being built with multi core operations foremost in priority. It is supposed to be extremely scalable and able to function on a very wide range of hardware. You can download the current snapshot of it on their site and dig into the source code, released under a 3-clause BSD style license. If you would like to learn the primary differences between this OS and Windows or Linux, you can read this PDF.

[via Engadget]

Coil Gun Speed Meter

October 1, 2009 by Caleb Kraft 28 Comments

_DIY_bullet_speed_meter (Custom)

One of the best parts of building a coil gun is seeing just how fast you can get that slug to move through the air. [Daniel] built this speed meter to be able to see exactly that. It is comprised of two optical sensors, one at each end of a barrel. As the projectile passes them, its speed is calculated using an Atmega16. Since the distance between the sensors is pre determined, its only some simple math to figure out the speed of an object passing between them. The result is then displayed on a nice looking blue LCD.

If the blue accent lighting and acrylic stylings look familiar, that’s because we’ve seen [Daniel] before. He’s the one that built the portable coil pistol.

[via HackedGadgets]

Solar Tracking, Without Overkill

October 1, 2009 by Caleb Kraft 56 Comments

[youtube=http://www.youtube.com/watch?v=ATnnMFO60y8]

We saw this pretty smooth solar tracker run by an Arduino. There aren’t many details, but we can see that it works well, and is in fact, run by an Arduino. We knew if we posted this that people would be commenting that the Arduino is overkill. We agree. So this post is to ask, how would you do it? Give us links to the more efficient designs you have come up with. It doesn’t have to be a fully documented project, a schematic will do. We would probably go with something like a phototropic suspended bicore for simplicity and low power consumption.

[via littlebirceo]