A Look At Sega’s 8-Bit 3D Glasses

April 19, 2023 by Zoe Skyforest 6 Comments

From around 2012 onwards, there was a 3D viewing and VR renaissance in the entertainment industry. That hardware has grown in popularity, even if it’s not yet mainstream. However, 3D tech goes back much further, as [Nicole] shows us with a look at Sega’s ancient 8-bit 3D glasses [via Adafruit].

[Nicole]’s pair of Sega shutter glasses are battered and bruised, but she notes more modern versions are available using the same basic idea. The technology is based on liquid-crystal shutters, one for each eye. By showing the left and right eyes different images, it’s possible to create a 3D-vision effect even with very limited display hardware.

The glasses can be plugged directly into a Japanese Sega Master System, which hails from the mid-1980s. It sends out AC signals to trigger the liquid-crystal shutters via a humble 3.5mm TRS jack. Games like Space Harrier 3D, which were written to use the glasses, effectively run at a half-speed refresh rate. This is because of the 60 Hz NTSC or 50 Hz PAL screen refresh rate is split in half to serve each eye. Unfortunately, though, the glasses don’t work on modern LCD screens, as their inherent display lag throws off the timing of the pulses the console sends to the glasses.

It’s a neat look at an ancient bit of display tech that had a small resurgence with 3DTVs in the 2010s. By and large, it seems like humans just aren’t that into 3D, at least beneath a full-VR experience. Meanwhile, if you’re wondering what 8-bit 3D looked like, we’ve got a 3D video (!) after the break.

Continue reading “A Look At Sega’s 8-Bit 3D Glasses” →

Hacking An Apartment Garage Door With New Remotes

April 19, 2023 by Zoe Skyforest 28 Comments

[Old Alaska] had a problem. He needed a second remote for his apartment garage door, but was quoted a fee in the hundreds of dollars for the trouble of sourcing and programming another unit. Realizing this was a rip-off given the cheap hardware involved, he decided to whip up his own sneaky solution instead.

It’s a simple hack, cheap and functional. An RF-activated relay with two remotes was sourced online for the princely sum of $8. [Old Alaska] then headed down to the equipment cabinet in the garage, opening the lock with the side of his own car key. He then wired the relay in parallel with the existing manual pushbutton for activating the garage door.

Sometimes, a hack doesn’t have to be complicated to be useful. Many of us might have jumped straight to trying to capture and emulate the existing remote’s radio signals. There was really no need. With physical access, [Old Alaska] was able to simply wire in his own remote entry setup himself.

We’ve seen similar hacks before, albeit achieved with SIGINT methods instead. Video after the break.

Continue reading “Hacking An Apartment Garage Door With New Remotes” →

New Tool Helps Create Laser-Cut Doom Maps

April 19, 2023 by Zoe Skyforest 7 Comments

Doom has a larger cultural footprint than the vast majority of video games ever made. That inspired [Theor] to see if it was possible to laser-cut some of the game’s maps to create a real-world model of those famous original levels.

Level data was extracted from the game’s original WAD data files using code written in Rust. Maps are described by multiple “lumps” within the WAD file format, each containing information on vertexes, walls, and floors. This data was scraped and converted into SVG files suitable for laser cutting. [Theor] then built a visualizer that could display what a stacked-up laser cut map would look like in 3D, to verify everything worked correctly. With that done, the map could be laser cut without worries that it would come out a jumbled, janky mess.

[Theor] kept the finished product simple, creating the map as a stack of blue acrylic pieces. We can imagine this tool being perfect for creating a high-quality diorama though, with some work done to paint the map to match what the player sees in game. If you happen to take that approach, don’t hesitate to notify the tipsline!

Little Twitter Game Boy Won’t Work Now The API Is Dead

April 19, 2023 by Zoe Skyforest 13 Comments

Twitter, like many social networks, used to feature a useful API. This let people do fun things like create toasters that could automatically post breaderly updates, or even load Twitter posts on machines that couldn’t handle full-fat websites. That API is now history, but [NEKOPLA] used it for a cute Game Boy-like Twitter device in its dying days earlier this year.

Swap out the TW BOY for a smartphone and this photo wouldn’t be nearly as good.

The “TW BOY”, as it is known, runs on a Raspberry Pi Zero 2 W, which includes a WiFi chip on board for easy internet connectivity. A Python script was charged with fetching Tweets for viewing using the now-dead Twitter API. Dithering was used to display color images on the 320×240 monochrome screen. Everything was wrapped up in a tidy 3D-printed housing to complete the look. The device uses two action buttons, and four directional buttons for navigation. It’s the layout popularized by the original Game Boy, and it looks super cute here, too.

The project was built as [NEKOPLA] has a penchant for single-use devices, due to their solitary focuses on doing one thing well. We can appreciate that ethos, and we love the final product, even if Twitter decreed it would no longer work. (Time to move on to Mastodon?) More images after the break.

Continue reading “Little Twitter Game Boy Won’t Work Now The API Is Dead” →

Old Czech Telephone Teardown Is Beautiful Purposeful Art

April 18, 2023 by Zoe Skyforest 16 Comments

The 20th century saw everything from telephones to computers become mainstream. Many of these devices were beautifully designed in the mid-century period, something that’s hard to say about a lot of today’s cheaper technology. [John Graham-Cumming] has shown us one exquisite example, with his teardown of a simple Czech telephone.

The model in question is a DS3600 telephone built by Tesla Stropkov in the early 1980s. Despite this, it’s a design that looks like it hails more from the 1960s based on its smooth curves and rounded features. It’s a rotary dial phone, though a push-button version was also produced.

Inside the phone is a simple single-sided PCB clearly marked out with a tidy silkscreen. The ringer and a few capacitors make up the bulk of the circuitry inside the base, along with the rotary dial. The handset itself plays host to most of the other componentry, including the mystery “WNB 068 hybrid circuit” which [John] couldn’t positively identify.

It’s great to get a look inside vintage hardware and see how things were done in yesteryear. It’s particularly funny to think about how simple telephones used to be in contrast to today.

[Thanks to Saint Aardvark for the tip!]

RoboGaggia Makes Espresso Coffee On Its Own

April 18, 2023 by Zoe Skyforest 12 Comments

[Nicholas DiPatri] very much loves his Gaggia Pro. It’s an amazing espresso machine, but it’s also kind of fussy and requires a lot of manual attention to brew a cup. As an engineer, he set about fettling the machine to run with a little less oversight. Enter RoboGaggia.

Stock, the Gaggia Pro requires regular water refills. The coffee-thirsty user must also wait for the brew heater to reach temperature before clicking the go button. Knowing the weight of coffee in the machine is key to getting the brew right, too. Steaming must also be done by hand. Overall, it’s a lot of work.

[Nicholas]’s goal was to get the machine to a point where he could load it with fresh ground coffee, hit a button, and walk away. On his return, the machine should be ready for steam. To achieve this, he went ham on outfitting the Gaggia Pro with fancy modern equipment. It scored a scale that sits in the drip tray, PID temperature controllers, a flow rate controller to manage the extraction profile, and an auto-fill water reservoir. The entire brew process is carried out under the command of a microcontroller, with live telemetry also sent to Adafruit.io for logging.

It’s by no means a lightweight project, but [Nicholas] has shared files on Github for the curious. However, if you’re in love with your Italian espresso machine and don’t want to switch, this might just be the kit you need to end your morning headaches. After all, when we’re in need of coffee, we’re at our worst for managing a complicated chemical processing plant. Video after the break.

Continue reading “RoboGaggia Makes Espresso Coffee On Its Own” →

New Renewable Energy Projects Are Overwhelming US Grids

April 17, 2023 by Zoe Skyforest 239 Comments

It’s been clear for a long time that the world has to move away from fossil energy sources. Decades ago, this seemed impractical, when renewable energy was hugely expensive, and we were yet to see much impact on the ground from climate change. Meanwhile, prices for solar and wind installations have come down immensely, which helps a lot.

However, there’s a new problem. Power grids across the US simply can’t keep up with the rapid pace of new renewable installations. It’s a frustrating issue, but not an insurmountable one.

Continue reading “New Renewable Energy Projects Are Overwhelming US Grids” →