A 3D-printed magnetic fidget business card with ID storage.

2024 Business Card Challenge: Magnetic Fidget Card

July 7, 2024 by 5 Comments

If you want someone to keep your business card around, you should probably make it really cool-looking, or have it do something useful. It’s kind of the whole point of the 2024 Business Card Challenge. And while we’d normally expect electronics of some persuasion to be involved, we must admit that this magnetic fidget card definitely does something, at least when manipulated. And even when it’s just sitting there, the card has a storage slot for IDs, or whatever you want.

Have you ever played with a magnetic fidget? They are quite satisfying, and making one yourself is likely to be even cheaper than making one of the spinning variety. This one uses a whopping 16 neodymium magnets, which means that it’s probably quite aurally satisfying as well as fun to handle.

And of course, since it’s 3D-printed, you can put whatever you want on the faces and update them easily if something changes. Bonus points to [Bhuvan Bagwe] for designing some for the Hackaday crew!

2024 Business Card Challenge

Hacking A Brother Label Maker: Is Your CUPS Half Empty Or Half Full?

July 7, 2024 by 8 Comments

On the one hand, we were impressed that a tiny Brother label maker actually uses CUPS to support printing. Like [Sdomi], we were less than impressed at how old a copy it was using – – 1.6.1. Of course, [Sdomi] managed to gain access to the OS and set things up the right way, and we get an over-the-shoulder view.

It wasn’t just the old copy of CUPS, either. The setup page was very dated and while that’s just cosmetic, it still strikes a nerve. The Linux kernel in use was also super old. Luckily, the URLs looked like good candidates for command injection.

Continue reading “Hacking A Brother Label Maker: Is Your CUPS Half Empty Or Half Full?” →

Repeatable “One-Click” Fusion, From Your Cellphone

July 6, 2024 by 22 Comments

Sometimes you spend so much time building and operating your nuclear fusor that you neglect the creature comforts, like a simple fusion control profile or a cellphone app to remote control the whole setup. No worries, [Nate Sales] has your back with his openreactor project, your one-click fusion solution!

An inertial electrostatic confinement (IEC) fusor is perhaps the easiest type of fusion for the home gamer, but that’s not the same thing as saying that building and running one is easy. It requires high vacuum, high voltage, and the controlled introduction of deuterium into the chamber. And because it’s real-deal fusion, it’s giving off neutrons, which means that you don’t want to be standing on the wrong side of the lead shielding. This is where remote control is paramount.

While this isn’t an automation problem that many people will be having, to put it lightly, it’s awesome that [Nate] shared his solution with us all. Sure, if you’re running a different turbo pump or flow controller, you might have some hacking to do, but at least you’ve got a start. And if you’re simply curious about fusion on a hobby scale, his repo is full of interesting details, from the inside.

And while this sounds far out, fusion at home is surprisingly attainable. Heck, if a 12-year old or even a YouTuber can do it, so can you! And now the software shouldn’t stand in your way.

Thanks [Anon] for the tip!

British Trains To (Maybe) Make Way For Steam Once More

July 6, 2024 by 72 Comments

There’s nothing more guaranteed to excite a grizzled old railway enthusiast than the sight of a steam locomotive. The original main-line rail propulsion technology still clings on in a few places, but for practical purposes, it disappeared a lifetime ago. It’s interesting then to hear of a brand new steam locomotive prototype being considered for revenue freight use on British metals. Is it yet another rebuild of a heritage design to be used for enthusiasts only? No, it’s an entirely new design with nothing in common with the locomotives of the past, as [Terrier55Stepney] tells us in the video below the break.

Gone is the huge boiler and reciprocating pistons of old, as indeed is the notion of boiling anything. Instead, this is a steam turbine, nothing like the 1920s and 30s experiments with conventional locomotives, nor even the Union Pacific’s oil-fired condensing turbo-electrics. The new idea here from the British company Steamology is to create steam directly from the combustion of hydrogen in a series of small modular steam generators, and the resulting prototype turbo-generator will replace the diesel engine in a redundant British Rail class 60 freight locomotive. It’s unclear whether it will incorporate a condenser, but since it has no need to retain the water for a boiler we’re not sure it would need one.

Prototype locomotives featuring new technologies have a long and inglorious history of not making the grade, so while this is definitely an exciting and interesting development we’re not guaranteed to see it in widespread use. But it could offer a way to ensure a low-carbon replacement for diesel heavy freight locomotives, and unexpectedly provide engine upgrades for existing classes. The fact it’s technically a steam locomotive is incidental.

Continue reading “British Trains To (Maybe) Make Way For Steam Once More” →

Full-Scale Flying DeLorean Gets Closer To Liftoff

July 6, 2024 by 12 Comments

These days, even hobbyist multi-rotor aircraft are capable of carrying considerable payloads. For example, the test rig that [Brian Brocken] recently put together should be able to loft more than 80 pounds (36 kilograms) without breaking a sweat. That would be a whole lot of camera gear or other equipment, but in this case, he’s planning on carrying something a bit more interesting: a full-scale foam DeLorean.

We first covered this project in December of last year, when [Brian] started using a massive robotic arm to carefully cut the body and individual parts of the car out of expanded polystyrene foam. He estimated at the time the body should weigh in at less than 30 lbs (14 kg), so he’d need to build a quadcopter with a maximum lift of roughly twice that much to keep the performance where he wanted it.

Continue reading “Full-Scale Flying DeLorean Gets Closer To Liftoff” →

A battery-testing business card.

2024 Business Card Challenge: A Battery Tester With Blinkenlights

July 6, 2024 by 8 Comments

Readers of a certain vintage will no doubt remember that for a brief time, some alkaline batteries came with a built-in battery tester. Basically, you just pushed really hard with your fingernails on the two ends of the strip, and it either lit up the little strip (or didn’t if it was dead), or made the word ‘good’ appear if energized.

But those days are long gone. What you need now is to either grab the voltmeter, stick out your tongue, or build yourself a battery-testing business card. Even the normies will enjoy this one, mostly because LEDs. Forty-seven of them to be exact, which will come to life and demonstrate that [Greg] is capable of making working electronic gadgets. No way does this card end up at the bottom of a desk drawer.

As far as grasping the batteries goes, [Greg] had several ideas, but ultimately landed on pogo pins, which we think is a fabulous solution. Be sure to check out the neat interactive BOM, somewhere in the middle of which is the CH32v003 RISC-V microcontroller. In the video after the break, you can see [Greg] using a Flipper Zero to program it.

Continue reading “2024 Business Card Challenge: A Battery Tester With Blinkenlights” →

Arduino PLC Keeps The Beat

July 6, 2024 by 12 Comments

For most of our prototype, hobby, or one-off electronics projects it’s perfectly fine to use a development platform like an Arduino Uno or something to that effect. They’re both easy to program and easy to wire up to projects without breaking the bank. But if you step into an industrial setting where reliability is paramount even in places that are noisy, vibrating all the time, hot, or otherwise unpleasant for electronics, you’ll want to reach for a programmable logic controller (PLC) that are much more robust. There is actually a PLC from Arduino, and if you want to dip your toes into the PLC world then take a look at this drum kit based on the Arduino Opta.

With the PLC at the core of the build, it’s on to making the drumming mechanisms themselves. For that, project creator [JC Audio] is using a series of solenoids attached to camera mounts with a custom 3D printed part that allows for quick assembly and disassembly so he can get the positioning of each drum sound just right. The high hat is taken care of by the noise of an internal solenoid, with the other drums striking various real drums and other solid objects in his shops. The solenoids themselves are driven by a solid-state relay expansion module to ensure there’s enough power

While the build doesn’t sit inside a factory and run for years at a time, a musician’s stage is certainly a rough enough environment that we might reach for a PLC over a standard development board for its benefits. The code for this project is available as well at the project’s GitHub page for those looking for a more advanced timekeeper to play along with their music practice, and for more details on why you might choose a PLC for your project take a look at this Arduino vs PLC showdown from a few years ago.

Continue reading “Arduino PLC Keeps The Beat” →