Does Getting Into Your Garage Really Need To Be Difficult?

November 9, 2023 by 78 Comments

Probably the last thing anyone wants when coming home from a long day at work or a trip is to be hassled at the last possible moment — gaining entrance to your house. But for some home automation enthusiasts, that’s just what happened when they suddenly learned that their own garage doors had betrayed them.

The story basically boils down to this: Chamberlain, a US company that commands 60% of the garage door market, recently decided to prevent “unauthorized usage” of their MyQ ecosystem through third-party apps. Once Chamberlain rolled out the change, users of Home Assistant and other unauthorized apps found themselves unable to open or close their doors with the apps they were accustomed to.

Those of us with custom smart home setups can relate to how frustrating it is when something disturbs the systems you’ve spent a lot of time tweaking and optimizing. It’s especially upsetting for users who both Chamberlain hardware specifically because it was supported by Home Assistant, only to have the company decide to drop support. This feels like false advertising, but we strongly suspect that buried in the EULA users must have agreed to at some point is a clause that essentially says, “We can do anything we want and tough noogies to you.” And if you read through the article linked above, you’ll get an idea why Chamberlain did this — they probably didn’t like the idea that users were avoiding their ad-spangled MyQ app for third-party interfaces, depriving them of ad revenue and the opportunity for up-selling.

We feel the frustration of these users, but rather than curse the darkness, perhaps this will light a candle of righteous rage that leads to a clever workaround. The Home Assistant blog article mentions a dongle called ratgdo, which should allow any door with plain old dry contacts to work via MQTT or ESPHome. It’s extra work that users shouldn’t have to put in, but maybe getting one over on The Man would be worth the effort.

Thanks to [KC] for the tip; please keep us posted on your workaround.

The Taylor and Amy Show

The Avon Computer Goth Challenge

November 2, 2023 by 9 Comments

Hot off the heels of their musical debut 6502 song the good folk at the Taylor and Amy Show are at it again. This time instead of assaulting our auditory senses, they play with our perception of color all while keeping the spirit of retro computing alive.

To back up a bit, I had the pleasure of witnessing the discovery of the Avon Beauty Vision Computer while at the Vintage Computer Festival Mid-West (VCFMW) this past September. We had visited the home of our friend [Jim W] from VCFMW who nonchalantly pulled down from the shelf the reddest computer I have ever seen.

A crowd quickly gathered at this newfound treat, designed and built before the invention of the Blue LED, was fallen upon and the process of prying out its secrets began. I was not privy to the negotiations, but I did notice a brightly colored red suitcase being exfiltrated by highly trained operatives later that night.

Continue reading “The Avon Computer Goth Challenge” →

Random Number Generator Is A Blast From The Past

November 2, 2023 by 16 Comments

Hackers love random numbers, or more accurately, the pursuit of them. It turns out that computers are so good at following our exacting instructions that they are largely incapable of doing anything that would fit the strict definition of randomness — which has lead to some elaborate methods of generating the unexpected.

Admittedly, the SB42 Random Number Generator built by [Simon Boak] isn’t exactly something you’d be using for cryptography. The method used to generate the digits, a pair of 555 timers sending pulses through linear-feedback shift registers, would at best be considered pseudo-random. Plus the only way of getting the digits out of the machine is by extracting them from the Nixie tubes with your Mark I Eyeballs. But it absolutely excels at the secondary reason many hackers like to build their own randomness rigs — it looks awesome.

Externally, it absolutely nails the look of a piece of vintage DIY year. Down to the classic white-on-black label tape. But open up the hood, and you’re treated to a real rarity these days: wirewrap construction. In an era where you can get PCBs made and shipped to your door for literally pennies, [Simon] is out there keeping the old ways alive. It doesn’t just look the part either. Unlike most modern projects we see, there isn’t a multi-core microcontroller behind the scenes doing all the work, it’s logic gates all the way down.

This isn’t the first random-ish number generator that we’ve seen use shift registers. But if you’re looking for something that might actually pass some randomness checks, and don’t mind working with something a bit spicy, you could check out some of the previous devices we’ve covered that used radioactive decay as an entropy source.

Continue reading “Random Number Generator Is A Blast From The Past” →

This OSHW Trackball Is Ready To Be Customized

November 1, 2023 by 25 Comments

Oh sure, Amazon can deliver any number of Logitech peripherals to your door in 48 hours, but where’s the fun in that? With open source hardware (OSHW) input devices like the Ploopy Adept Trackball, you not only get to say you built the thing yourself, but there’s also an opportunity to tune the gadget to your exacting specifications — even if that just means packing it full of RGB LEDs.

The trackball is powered by the Raspberry Pi Pico running QMK, features a high-accuracy PMW3360 sensor that can be found in commercial gaming mice, and uses a snooker ball for the business end. All the hardware is wrapped up in a 3D printed enclosure, and thanks to the VIA project, configuring the device can be done right in the browser through a web app.

Like the other devices in the (somewhat unfortunately named) Ploopy family, all of the design files for the Adept Trackball are released under the CERN license, which combined with the project’s fantastic documentation means you’ve got everything you need to build it from scratch. There are official parts kits if you don’t want to source or print all the components yourself, but as of this writing, the Ploopy Shop will only let you preorder them.

What The Artisan 3-in-1 CNC Offers (If One Has The Table Space)

November 1, 2023 by 34 Comments

I never feel like I have enough space in my workshop. The promise of consolidating tools to make the most of limited space drew me to the Snapmaker Artisan, a plus-sized 3-in-1 tool combining 3D printer, laser engraver, and CNC machine.

Smaller than three separate tools, but still big.

Jacks of all trades may be masters of none, but it is also true that a tool does not need to be a master of its functions to be useful. For many jobs, it enough to simply be serviceable. Does a machine like the Artisan offer something useful to a workshop?

Snapmaker was kind enough to send me an Artisan that I have by now spent a fair bit of time with. While I have come to expect the occasional glitch, having access to multiple functions is great for prototyping and desktop manufacturing.

This is especially true when it allows doing a job in-house where one previously had to outsource, or simply go without. This combo machine does have something to offer, as long as one can give it generous table space in return.

What It Is

The Artisan is a large dual-extrusion 3D printer, CNC router, and diode-based laser engraver. To change functions, one physically swaps toolheads and beds. Very thankfully, there are quick-change fixtures for this.

Driving the Artisan is Snapmaker’s software Luban (GitHub respository). Named for the ancient Chinese master craftsman, it is responsible for job setup and control. For laser and CNC work, there are convenient built-in profiles for a variety of paper, plastic, leather, and wood products.

The unit is enclosed, nicely designed, and — while I have come to expect the occasional glitch — serviceable at all three of its functions. The size and stature of the machine warrants some special mention, however.

Continue reading “What The Artisan 3-in-1 CNC Offers (If One Has The Table Space)” →

A woman with a black vest and pink shirt with curly hair stands behind a podium in front of a projected presentation. She is speaking and has her hands moving in a vague guesture.

Supercon 2022: Carrie Sundra Discusses Manufacturing On A Shoestring Budget

October 31, 2023 by 2 Comments

Making hardware is hard. This is doubly true when you’re developing a niche hardware device that might have a total production run in the hundreds of units instead of something mass market. [Carrie Sundra] has been through the process several times, and has bestowed her wisdom on how not to screw it up.

The internet is strewn with the remains of unfulfilled crowdfunding campaigns for tantalizing devices that seemed so simple when they showed of the prototype. How does one get something from the workbench into the world without losing their life savings and reputation?

[Sundra] walks us through her process for product development that has seen several products successfully launch without an army of pitchfork-wielding fiber crafters line up at her door. One of the first concepts she stresses is that you should design your products around the mantra, “Once it leaves your shop IT SHOULD NEVER COME BACK.” If you design for user-serviceability from the beginning, you can eliminate most warranty returns and probably make it easier to manufacture your widget to boot. Continue reading “Supercon 2022: Carrie Sundra Discusses Manufacturing On A Shoestring Budget” →

Black 4.0 Is The New Ultrablack

October 31, 2023 by 100 Comments

Vantablack is a special coating material, moreso than a paint. It’s well-known as one of the blackest possible coatings around, capable of absorbing almost all visible light in its nanotube complex structure. However, it’s complicated to apply, delicate, and not readily available, especially to those in the art world.

It was these drawbacks that led Stuart Semple to create his own incredibly black paint. Over the years, he’s refined the formula and improved its performance, steadily building a greater product available to all. His latest effort is Black 4.0, and it’s promising to be the black paint to dominate all others.

Continue reading “Black 4.0 Is The New Ultrablack” →