More Glove-based Interfaces

May 10, 2010 by 7 Comments

You may remember seeing the golf glove air guitar hack last month. Here’s two more uses for gloves with sensors on them.

On the left is a glove interface with flex sensors on each digit as well as an accelerometer. The VEX module reads the sensors to detect sign language as a command set. A shake of the hand is picked up by an accelerometer to delineate between different command sets. See it controlling a little robot after the break. This comes from [Amnon Demri] who was also involved in the EMG prosthesis.

Straight out of Cornell we have the SudoGlove, seen on the right. [Jeremy Blum] and his fellow engineering students bring together a mess of different sensors, sourcing an Arduino and a XBee module to control a small RC car with added lights and a siren. There’s embedded video after the break. You may want to jump past the music video for the description that starts at about 3:52.

Continue reading “More Glove-based Interfaces” →

FPS Controller Hacks Getting Easier

May 10, 2010 by 12 Comments

It used to be a major production to build a gun-form-factor FPS controller but commercial tech has adopted many of those traditional hacks over the years. Now, [Nirav Patel] is playing Cube with a Wii zapper and a SpacePoint. All that was really required to make this happen is a patch to Cube, the open source FPS.

[Nirav] has plans to make this controller wireless using a BeagleBoard. We’re wondering if there’s support for using the Wii motion plus? We’ve seen motion plus Arduino connectivity, as well as direct PC connectivity. The Wii remote already connects to Linux, what about pulling that data down from the Bluetooth connection? If you’ve done this, send us a tip about it.

TOBY: Reel Mower Bot evolved

May 10, 2010 by 13 Comments

[Grayson Sigler] rolled out a new version of his robotic mower which he calls TOBY. The previous design added motors to a reel mower but he had trouble with traction. The new design is more of a utility robot platform that is used to tow the reel motor behind it. With better wheels, a much more stable base, and plenty of power this is a significant improvement.

His parts order came since we last checked in and he now has RC fully implemented. Check out the video after the break.

Continue reading “TOBY: Reel Mower Bot evolved” →

Making A Bluetooth SNES Controller

May 10, 2010 by 10 Comments

[youtube=http://www.youtube.com/watch?v=OP8JgqmVES8&]

[MODDEDbyBACTERIA] has posted this instructible on how to make a bluetooth SNES controller. The bulk of the parts come from a bluetooth MSI game pad, so this isn’t a scratch build, but the amount of modifications required definitely qualify this as a hack. We were quite surprised that he managed to stuff all of that back into the case as well as he did. Great job.

Twilio Adds Touch Tone Telephone Control For Arduino

May 9, 2010 by 17 Comments

An Arduino with an Ethernet shield, nothing new right? Not quite, [Chris] is showing us how to use Twilio to control an Arduino via a touch tone telephone. We saw Twilio used before in a cellphone video game but this time around an audio menu system comes into play. You can make your own menus whose options will be read by the WOPR (see the demo after the break) when you call the Twilio number. This application just turns an LED on and off but once you’ve got access to the Arduino the sky’s the limit. Most immediately this is an easy implementation for all those cellphone door lock systems we’ve seen. We also envision some classic home automation such as feed the cats or turn on the lights.

Continue reading “Twilio Adds Touch Tone Telephone Control For Arduino” →

Multiple Material 3D Printing

May 9, 2010 by 60 Comments

[youtube=http://www.youtube.com/watch?v=D4Yq3glEyec]

It’s no surprise that we’re wild about 3D printing, especially [Devlin]. Now we’re absolutely out of our minds for this multi-material polyjet machine that is featured in the video above. Before we go any further it’s worth mentioning that this post is not advertising, we just think this machine is unbelievable.

It is capable of printing 600 dpi in 3D using multiple materials at the same. Two types of rigid material, one like ABS and the other like polypropylene, as well as seven levels of a soft material all exist on the same print head. They can be deposited along with a support material at the same time. In the video you can see enclosures that come out of the printer with rubber-like padding already mounted in the hard plastic shell. They even show a bicycle chain that is fully assembled after printing. Cost for these machines? We don’t want to know, it’s just fun to dream about having unrestricted access to one.

Continue reading “Multiple Material 3D Printing” →

Manual Transmission Gear sensor

May 9, 2010 by 57 Comments

[Ben] bought a remote starter for his car but needed a way to make sure the manual transmission was in neutral when starting. He built this infrared sensor frame to detect the position of the stick. It uses four beam paths which will tell him the exact gear or neutral position of the shifter. For this project he just needs to detect neutral but exact gearing is apparently necessary information for his next hacking project. We initially were worried about sunlight interfering with the sensor readings but he’s building this to go under the collar that is used to cover up the mechanical joint at the base of the stick.