Freerunner With Android, New Case, Battery

December 27, 2009 by 6 Comments

[Dennis] got snowed in after the biggest storm in the history of the state hit. Like any good hacker he didn’t let the time go to waste. He decided to dig out his Neo Freerunner to give it a decent battery and a new OS.

The original battery for the Freerunner has a controller board integrated into the package. [Dennis] pulled out the board and attached it to a portable DVD player battery. After running it through a discharge cycle with another hack of his, the board learned the new battery capacity. The larger battery plus a fast-charger from SparkFun required a larger case. He made it happen by combining a 2.5″ HDD case with the original body courtesy of some JB weld. The final portion of the hack was to load up Android which is as simple as untarring the package onto an SD card.

It’s a bit big, but the battery will last and he’s got an open platform. Nice work!

Hackaday Links: December 27, 2009

December 27, 2009 by 8 Comments

Brain Controlled Game

If you’re a fan of biometrics this game is for you. It uses a homemade EEG to facilitate simple control. This is along the same lines as the Force Trainer hacks but this homebrew hardware is fun to look at. The success of the project can be seen in the video of a simple game they developed.

RF Camera Remote

[Jonny] wanted to trigger his Nikon camera remotely but was unhappy with the functionality of the IR remote. He hacked together an RF remote and receiver that still uses the IR functionality of the camera, but allows for the geographic freedom of Radio Frequency. Not as advanced as some we’ve seen but it meets his specifications.

CNC Mill

[Jan] tipped us off about a CNC mill that her friend made. The machine turned out beautifully even though very few tools were used to produce it. We love to pour over these builds so if you’ve done one, document it and send it in.

Neutering the On Demand Button

[Dan] hated his Comcast remote because the On Demand button could be hit by mistake. This was usually when trying to unpause live TV. The remainder of the show couldn’t be viewed just because the On Demand menu launched. Simplicity is king. He fixed this by placing two small paper rolls between the button and the circuit board. This way the button can still be used but only if you press pretty hard.

(Yet Another) Twitter This Controlling Arduino That

December 27, 2009 by 7 Comments

Christmas may be over, but we still have a couple of cool holiday related hacks for you. One being [Alpay’s] Twitter based interactive Christmas tree ornaments.

We tried to dig up some more information, but it thus far appears a laptop running Processing searches Twitter for specific Christmas related words (like 1337, that’s Christmas-y), sends a buffer to one of three Arduinos which in turn light up a specific ornament. You can check out a live stream here.

For those wanting a bit more information on Arduino and controlling holiday lights, check out [Alpay’s] GE health care version of Twitter lights, or our previous post on controlling Christmas trees, or you might even try [Michael’s] $10 Walmart light controller.

Automated Car Cover

December 27, 2009 by 17 Comments

[Mike] covers his car whenever he puts it into the garage because the top is always open. After years of this ritual he decided to upgrade his garage to automatically cover the vehicle (link dead, try the Internet Archive version). The car cover, made from a few bed sheets, attaches to the bottom of the garage door. At the front of the stall the cover has two half-pound weights sewn in with plenty of padding to protect the car’s finish. Ropes attach to these weights, travel through a pulley system, and connect to the garage door opener carriage. This $65 dollar solution makes sure [Mike’s] car is always taken care of.

[Thanks 02TA]

Office Prank: Death From Above

December 26, 2009 by 24 Comments

[youtube=http://www.youtube.com/watch?v=RFVECjF0T5Q]

Unsuspecting office workers beware. You may already be in the cross-hairs of a ping-pong ball launching robot. This covert robot hangs out on the other side of a suspended ceiling, waiting for its operator to unleash the fury. When put into action a hatch in a ceiling tile is raised and balls are launched at a cowering cube-dweller.

It looks like the balls are launched at a reasonable speed and won’t hurt anyone. The next generation of this bot should do a better job of integrating the trap door and be quieter. This would be a lot more fun if the victim couldn’t figure out where the heck that ball just came from.

[via BotJunkie]

Does Your Phone Have A GOOG-411 Button?

December 26, 2009 by 53 Comments

While visiting family we noticed that their telephone had a dedicated GOOG-411 button. We’ve been using Google’s free 411 service for what seems like years but seeing this show up in the form of an auto-dial button is astonishing.

The question that pops to mind: how is this not an antitrust suit waiting to happen? Directory assistance is BIG MONEY that Google undercut when launching its free service. By shipping phones that have the number pre-programmed doesn’t that limit choice and competition in the same way that shipping Windows with Internet Explorer does? Perhaps the difference is that Microsoft has a near monopoly on the PC OS market while GE can’t say the same about cordless phones.

We’re not antitrust lawyers, and neither are you, but we’d still like to hear your opinions about this in the comments.

Ultrasonically Controlled Instrument

December 26, 2009 by 2 Comments

[vimeo=http://www.vimeo.com/8228439]

[Rui] is working on a sequencer to control his robotic gamelan. The software maps out the controllers that operate the musical robot, which play the traditional Indonesian instruments.

The controls use ultrasonic distance sensors that detect the proximity of the musician’s hands. This data is collected by an Arduino and sent to a computer for use with the sequencer. The controller body is an upside down salad bowl from Ikea; cheap, available, and creative!

[via @littlebirdceo]