Ultrasonically Controlled Instrument

December 26, 2009 by 2 Comments

[vimeo=http://www.vimeo.com/8228439]

[Rui] is working on a sequencer to control his robotic gamelan. The software maps out the controllers that operate the musical robot, which play the traditional Indonesian instruments.

The controls use ultrasonic distance sensors that detect the proximity of the musician’s hands. This data is collected by an Arduino and sent to a computer for use with the sequencer. The controller body is an upside down salad bowl from Ikea; cheap, available, and creative!

[via @littlebirdceo]

VFD Clock (ends The World)

December 26, 2009 by 15 Comments

We honestly thought [Jason’s] VFD clock was some form of new terrorist attack when we came across the RSS. Thank goodness our relations with Russia aren’t as MAD as they used to be.

The main components are an IV-18 VFD with a MAX6921 driver, which to an untrained ear do sound surprisingly threatening. However an Arduino settles our hearts down and assures us this only has as much potential as blinking a VFD. While the main code, schematics, and CAD aren’t available (open source coming to a theater near you soon) at the moment – you can check out [Jason’s] inspiration, the Ice Tube Clock, which runs many of the same components.

Enjoy a video of it in action after the break. We love the ‘countdown’ feature the most.

[via Make] Continue reading “VFD Clock (ends The World)” →

Replacement Refrigerator Controller

December 26, 2009 by 17 Comments

[Michael] got his hands on a refrigerator that he intended to store beer in but found that it ran constantly. Instead of buying a new thermostat he and his friend [Doug] set out to build an Arduino-based controller for the fridge.

The finished project will switch 240v so they’ve used a transformer to power the logic circuitry and a solid state relay to handle the load switching, with a Dallas 1820 for temperature data. Because the Arduino offers more capabilities than the average thermostat hack they also decided to tap into its potential by adding an Ethernet shield. We see the Arduino as a prototyping device and so do these folks. Once the bugs in their first PCB prototype are worked out the circuit will use the ATmega328 and do away with the Arduino.

[via @littlebirdceo]

RFID Control Concept

December 26, 2009 by 3 Comments

That’s not a smoke detector, it’s an RFID detecting puck. [Eric] and [Brent] have been working on this concept to produce a virtual knob. When the device detects an RFID tag it vibrates, then the puck can be turned like a virtual knob, an accelerometer picking up the motion data. The build is rounded out with a XBee module for connectivity and housed in a printed case.

The video after the break shows the device controlling colored lights. There is a different tag for each color and when the reader is over one of them the puck can be rotated to turn brightness up or down. We foresee a lot of great uses for this. Turn it into a thermostat for public places by adding a character display to the mix. A tag can be affixed to a wall, when you want to change the thermostat setting just hold the puck over the tag and turn until the screen displays the desired temperature.

Continue reading “RFID Control Concept” →

Hacking The OnStar GPS V2

December 26, 2009 by 20 Comments

[Andy] has provided us with his new guide to hacking the OnStar GPS. Previously, we have covered a way to grab the GPS data from an unused OnStar system, however in recent years GM has added much more complex systems, which make it harder than swapping out a serial line. For the new version, [Andy] has figured out GM’s Controller Area Network (CAN), which they call GMLAN. He has also done most of the software snooping and sleuthing, and has mostly solved GMLAN’s method of announcing GPS data. There is sample code available to convert this information into generic latitude and longitude.

Unfortunately for the project, (and very fortunately for [Andy]), he has a child on the way and new job responsibilities, so he is offering up his results to the HaD community to finish up, double check, and provide a good how-to for everyone else. To anyone who decides to pick up this project and run with it, let us know!

Aerodynamic Tail Makes Geo Metro Even Cooler

December 25, 2009 by 77 Comments

[MetroMPG], an environmentally friendly car enthusiast from Ontario, added a tail to his car to increase gas mileage. This 1998 Pontiac Firefly is a sibling of the cheap and popular Geo Metro. He had already done some work to cover a portion of the rear wheel wells to reduce drag. Using cardboard, duct tape, and an aluminum frame he extended the rear of the car by around six feet.

The results are pretty impressive. His extensive testing can be seen in the video after the break and reveals a Miles Per Gallon increase of 15.1% at 90 km/h to get to 64 MPG. The tail is removable but we’re thinking it’s a pain to keep relocating the tail lights from the original body to the removable one.

Now we’re wondering if someone is doing this to our Smurf-blue Metro that we sold to the junk man for $100 back in 2001. It ran great, if you weren’t caught in the cloud of blue smoke coming out the back.

Continue reading “Aerodynamic Tail Makes Geo Metro Even Cooler” →

You’re Not Seeing Double: RGB Christmas Trees

December 25, 2009 by 30 Comments

[youtube=http://www.youtube.com/watch?v=GAt6A98lXQw]

[mrpackethead], created this monster of a tree.  As shown in the video, it’s capable of showing animations, patterns, and potentially video. The 6m tall creation is studded with 2000 waterproof RGB LED modules. Software for the tree was written in Apple’s own Quartz Composer and integrated into Madrix, a piece of software designed with the purpose of controlling LEDs. The 600W system is 100% Arduino-free and costs less than the equivalent of 0.04USD per hour to run in New Zealand.

[Geoist] opted for the Arduino way to rig up his own smaller RGB Christmas tree. Finding a slightly kitschy fiber-optic model in his local department store, [Geoist] was eager to harness its colour-changing powers. Upon opening it up, it was discovered that it was controlled by nothing more than a light bulb and a spinning disk of coloured light filters. [Geoist] gutted the setup in favour of a breadboard with 3 RGB lights hooked up to an Arduino. The sketch for it is available on his site.