OLPC Pedal Power

olpc-pedal-power

A One Laptop Per Child group out of Afghanistan have come up with a way to power the XO using pedals. The system interfaces a set of pedals with the Freeplay hand-crank charger, freeing up both hands for typing. Although not as compact, using both legs makes power generation much easier. Apparently a child as young as 3rd grade is able to pedal this well enough to power the computer in real time.

We just hope this contraption is used for learning and betterment, and not in a pedal-for-porn scenario.

[via Gizmodo]

Halloween Props: Flying Crank Ghost

flying-crank-ghost

[Jake’s] projects have become regular features here on Hack a Day. He keeps the Halloween hack-fest rolling with his Flying Crank Ghost. For the ghost he used a store-bought skull but sculpted some hands himself out of Styrofoam. The body is fashioned from coat hangers with a bit of creepy fabric draped over the hole thing to complete the look.

He added some very convincing motion to the ghoul using a salvaged microwave turntable motor. The motor is mounted in the center of a two crossed boards, and has an armature attached to it. Three strands of monofilament attach to the end of the armature, run through eyelets on the ends of the crossed boards, then attach to the head, and each arm. When the motor is turned on, the armature turns, moving the head and hands up and down at different rates. Take a look at the embedded video after the break to see the final product.

[Jake] does mention that the motor he used is a bit underpowered. We figure this only needs to hold up for one night, so dig through your junk bin and see if you can throw one of these together in a few hours.

Continue reading “Halloween Props: Flying Crank Ghost” →

Binary Adder Will Give You Slivers

marble_adder

A while back we looked at [Matthias’] one-pin dot matrix printer. Now we’re jumping over to his woodworking website to feast on his wooden binary adding machine. His creation uses glass marbles as the data for this device. A resolution of up to six bits can be set on the top of the adder, then dropped into the machine as one number. With each new drop, the number is added to the total stored in the machine. The device is limited to totals less than 64. If a larger number is enter, the device wraps around back to zero by dumping the 7th bit off the end. He’s even got a master clear that allows you to easily read the stored total and evacuate the “data” from the machine.

This has quite a few less wires than the last binary adder we looked at… wait, it has no wires! But we still love it. A physical representation of what is going on with binary math really helps grasp what the magic blue smoke inside those silicon chips is all about. Don’t miss his video walk through of the adding machine embedded after the break. Can’t get enough of marbles interacting with wood? He’s got a few more projects you might enjoy. Continue reading “Binary Adder Will Give You Slivers” →

Robot Einstein Could Save Humans From Killbot Destruction

einstein-robot

Earlier this year we saw the Einstein robot that is being developed to facilitate human facial emotions in robots. [David Hanson], the man in charge of this project, has given a TED talk on his work that includes a show-and-tell of his most recent progress. We’ve embedded the video after the break for your enjoyment.

The Einstein robot (head only in this video) shows off the ability to recognize and mimic the facial emotions of the person in front of it. There is also video of a Bladerunner-esque robot looking around a room, recognizing and remembering the faces of the people it sees. [David] makes a very interesting proclamation: he’s trying to teach robots empathy. He feels that there is a mountain of R&D money going into robots that can kill and not much for those that can sense human emotions. His hope is that if we can teach empathy, we might not be annihilated when robots become smarter than us.

That’s not such a bad idea. Any way you look at it, this talk is interesting and we wish the five-minute offering was five-times as long. But [Mr. Hanson’s] facial hair alone is worth clicking through to see.

Continue reading “Robot Einstein Could Save Humans From Killbot Destruction” →

Daft Punk Replica Helmet

daftpunkhelmet

For all their varied and entertaining uses, circuits and code comprise only part of the complete hacking experience. To really put your project over the top, sooner or later you’ll want to possess some physical fabrication skills. Consider the works of [Ben Heckendorn]: He’s always done a fantastic job with the electronics, but it’s the fit and finish of the enclosures that make him a legend.

“Fabrication” usually conjures images of shop tools — saws and sanders and drills — all tremendously useful skills worth learning, and easily within reach of most home shops or garages. Recently, the techniques of mold making and casting have seen something of a DIY renaissance. Mold making is nothing new, the basic concepts go back millennia, but in just the past few years the materials for extremely high-quality molds have become safer, simpler to use, and easier to acquire.

This being Halloween month, what better example of the medium than this impeccable replica helmet styled after half of the musical duo Daft Punk (a recurring theme among Hack a Day contributors), created by prop maker [Harrison Krix]. After sculpting an original master part (from common hardware store and art store materials, we might add), a one-piece flexible mold is built up from silicone, which captures every minute detail, and later the helmet form is cast from a thin layer of resin. The visor is vacuum formed. A follow-up with the internal electronics build is yet to be posted, but even at this stage the shell alone is so refined it looks straight off a showroom floor. If mold making can do this for someone’s noggin, imagine what it can do for your next creative hardware project. Smooth-On, a major supplier of these materials, has a free PDF introduction and a set of tutorials on their web site.

[thanks Wolf]

Haptic Halluc 2

[youtube=http://www.youtube.com/watch?v=E4UKXyPlO8Q]

We can not express the childlike glee that we experienced watching this video. We want so badly to have one of these setups. What you are seeing is a half dome projected cockpit with two haptic controllers in the style of a delta robot. This is controlling the Halluc robot which is a hybrid wheeled octopod. The dome can and has been done at home fairly simply, and we suspect that you guys could come up with some similar delta controllers. So who wants to build one and donate it to hackaday?

[via BotJunkie]

How To Populate A Surface Mount PCB

Reflow_08

Let’s face it friends, everything is moving toward surface mount components. We’ve seen quite a few features here that cover using stencils to populate boards and using ovens to reflow. [Oleg] has put together a tutorial on the process he uses to populate and reflow his own boards.

[Oleg] is the creator of the USB Isolator and therefore has a need to frequently populate the same board. He’s using an acrylic frame that fits the PCB perfectly to hold it in place so that paste and be applied right up to the edges of the board. He ordered a laser cut Kapton stencil for applying the solder. The paste is squeegeed into the stencil holes, the stencil is removed, and parts are placed with tweezers and a steady hand. For the final step, the boards go into an old toaster oven for reflow.

[Oleg] uses temperature marker on his boards to monitor the progress of the reflow. This marker is basically a crayon that begins to melt at a specific temperature. When the board has cooled, the melted mark can be scraped away or removed with alcohol.

Of course this is only really useful if you have a bunch of high-quality boards to populate. But with the relatively low cost of getting professionally made boards we think the need for this type of assembly process is on the rise.