Respectfully Modifying The Amiga 500

March 12, 2018 by Tom Nardi 22 Comments

Modifying the Amiga 500 to speed up access to RAM in a memory expansion pack is a well documented procedure, with guides on the process written in the early 1990’s when the hardware was only a few years old. But as they were written for contemporary hardware, they make no concessions for how one should be treating a vintage computer that’s now over 30 years old. In 1993, cutting traces on the Amiga 500 motherboard was just a last ditch effort to eek a few more months of service life out of an outdated desktop computer. But in 2018, it’s kind of like when that old lady tried to “restore” a fresco of Jesus in Spain; it might be done with the best of intentions, but you still screwed the thing up good and proper.

Such things don’t fly over at [Inkoo Vintage Computing]. There you can find a guide that details the impressive lengths one can go to if they want to perform the classic modification without any irreversible changes to the motherboard. To avoid the cut traces and soldered bodge wires, this version of the modification makes use of a novel adapter that breaks out the necessary connections on the 8372A chip.

The adapter is simply a homemade PCB with both male and female plastic leaded chip carrier (PLCC) connectors. The few pins on the chip that needed rerouting are exposed as solder pads on the adapter for easy wiring. There are even a couple jumpers on the adapter to turn the modifications on and off.

Not surprisingly, the trickiest part of building this adapter was sourcing the antiquated PLCC connectors. Assuming you can even find them, you are then left with the challenging task of soldering them together. Judging by the pictures on the [Inkoo Vintage Computing] page, it’s no walk in the park.

Another similar arrangement is used in the expansion bay of the Amiga, where a pin is virtually “cut” in the connector. A tiny PCB is soldered to a 3×2 header to reroute the signals, and another jumper is used to enable and disable the pin. Luckily, the long pins on the Amiga memory expansion are forgiving enough that the little board can fit in between them without breaking electrical contact.

We’re no stranger to the Amiga 500 around these parts. We’ve covered how to get the 1987-vintage machine online in the 21st century, as well as employing a Raspberry Pi to emulate the original floppy drive. You can even make your own faux-Amiga with a 3D printed case, if you suffer from a sort of existential dread when working on a computer that’s older than you are.

Android Sources For The Asus Tinker Board

March 10, 2018 by Jenny List 18 Comments

The Asus Tinker Board is one of the quiet achievers of the powerful single board computer market. A Raspberry Pi form factor with a significantly more powerful processor, more memory, faster networking, and Asus build quality. In hardware terms it leaves many of the other Pi competitors in the dust. If the Tinker Board has a problem though it is the same one that affects so many otherwise promising offerings, that its software support isn’t as strong as the fruity computer from Cambridge. When you buy a Pi it’s Raspbian that makes it a wise purchase, along with the huge community support that surrounds it.

An interesting development on that front comes courtesy of [Justin], who tells us that the sources have been released for the Tinkerboard flavour of Android. The community have put in the work on the board’s Linux distro, but the Android side hasn’t had the same opportunity. This step makes the Tinker Board a significantly more interesting choice for custom Android development, as unlike some of its competitors for which only precompiled builds are available it puts a bespoke Android build in the hands of its developers.

We like the Tinker Board here at Hackaday. We first reviewed it when the boards became available, but later found that they had reached the market in error before Asus had a stable operating system. We therefore returned with another review six months later, and found it to be a credible Raspberry Pi alternative saved by its band of enthusiasts who have filled in for any of its software shortcomings.

Google Ups The Ante In Quantum Computing

March 9, 2018 by Al Williams 36 Comments

At the American Physical Society conference in early March, Google announced their Bristlecone chip was in testing. This is their latest quantum computer chip which ups the game from 9 qubits in their previous test chip to 72 — quite the leap. This also trounces IBM and Intel who have 50- and 49-qubit devices. You can read more technical details on the Google Research Blog.

It turns out that just the number of qubits isn’t the entire problem, though. Having qubits that last longer is important and low-noise qubits help because the higher the noise figure, the more likely you will need redundant qubits to get a reliable answer. That’s fine, but it does leave fewer qubits for working your problem.

Continue reading “Google Ups The Ante In Quantum Computing” →

Images As Excel FIles Are Gloriously Nasty

March 1, 2018 by Jenny List 58 Comments

Almost every person of a technical persuasion who has worked in an office will have some tale of wildly inappropriate use of office technology for a task that could have been accomplished far more simply with an appropriate tool. There are jokes about people photocopying a blank sheet of paper when they need a few sheets themselves, but some of the real stories are very bit as surreal.

[Bjonnh]’s patience for such things was exceeded when he received a screenshot embedded in a Microsoft Word file. His response is both pointless and elegant, a Python script that takes a JPEG image and encodes it into an Excel file. It’s simply an array of cells whose background colours represent the pixels, and he warns us that the output files may take a while to load. We just had to subject it to a test, but are sorry to report that LibreOffice doesn’t seem to want to play ball.

So yes, this is a small departure from our usual fare of hardware, and it serves no use other than to be a fantastically awful misuse of office technology. If you’ve ever been emailed a PowerPoint invitation to the office party though, then maybe you’ll have cracked a smile.

If pushing your corporate spreadsheet to the limit is your thing, perhaps you’d also like to see it running a 3D engine.

Microsoft Quantum Simulator Goes To Linux And Mac

February 28, 2018 by Al Williams 13 Comments

Everyone seems to be gearing up for the race to be the king of quantum computers. The latest salvo is Microsoft’s, they have announced that their quantum simulator will now run on macOS and Linux, with associated libraries and examples that are now fully open source. They have produced a video about the new release, which you can see below.

Microsoft also claims that their simulator is much faster than before, especially on large simulations. Of course, really large simulations suffer from memory problems, not speed problems. You can run their simulator locally or on their Azure cloud.

Continue reading “Microsoft Quantum Simulator Goes To Linux And Mac” →

Stretched PC Case Turned GPU Cryptominer

February 23, 2018 by Tom Nardi 39 Comments

We don’t do financial planning here at Hackaday, so we won’t weigh in on the viability of making money mining cryptocurrency in such a volatile market. But we will say that if you’re going to build a machine to hammer away at generating Magical Internet Monies, you might as well make it cool. Even if you don’t turn a profit, at least you’ll have something interesting to look at while you weep over your electricity bill.

Sick of seeing the desktop machine he built a decade ago gathering dust, [plaggle24w5] decided to use it as the base for a cryptocurrency mining rig. Of course, none of the original internals would do him any good, but the case itself ended up being a useful base to expand on. With the addition of some 3D printed components, he stretched out the case and installed an array of video cards.

To start with, all the original plastic was ripped off, leaving just the bare steel case. He then jammed a second power supply into the original optical drive bays to provide the extra power those thirsty GPUs would soon be sucking down. He then designed some 3D printed arms which would push out the side panel of the case far enough that he could mount the video cards vertically alongside the case. Three case fans were then added to the bottom to blow air through the cards.

While [plaggle24w5] mentions this arrangement does work with the case standing up, there’s obviously not a lot of air getting to the fans on the bottom when they’re only an inch or so off the ground. Turning the case on its side, with the motherboard parallel to the floor, allows for much better airflow and results in a measurable dip in operating temperature. Just hope you never drop anything down onto the exposed motherboard…

Mining Bitcoin on desktop computers might be a distant memory, but the latest crop of cryptocurrencies are (for now) giving new players a chance to relive those heady early days.

“The Commodore Story” Documentary Premieres Today

February 23, 2018 by Dan Maloney 49 Comments

What is it about a computer that was introduced 36 years ago by a company that would be defunct 12 years later that engenders such passion that people still collect it to this day? We’re talking about the Commodore 64, of course, the iconic 8-bit wonder that along with the other offerings from Commodore International served as the first real computer to millions of us.

There’s more to the passion that Commodore aficionados exhibit than just plain nostalgia, though, and a new documentary film, The Commodore Story, seeks to explore both the meteoric rise and fall of Commodore International. Judging from the official trailer below, this is a film anyone with the slightest interest in Commodore is not going to want to miss.

It will of course dive into the story of how the C64 came to be the best selling computer in history. But Commodore was far from a one-trick pony. The film traces the history of all the Commodore machines, from the PET computers right through to the Amiga. There are interviews with the key players, too, including our own Bil Herd. Bil was a hardware engineer at Commodore, designing several machines while there. He has shared some of these stories here on Hackaday, including the development of the C128 (successor to the C64) and making the C64 speak.

We can’t wait to watch this new documentary ~~and luckily we won’t have to~~. It’s set to start streaming on Netflix, Amazon, and iTunes ~~today, so pop up some popcorn and settle in for a two-hour ride through computer history~~ but right now we’re unable to get firm dates on when. However, those of you in the Mountain View area have an even better opportunity this evening.

The Commodore Story will be premiered live at 6:30pm PST at the Computer History Museum. Grab your tickets to the premiere and a Q&A session with Bil Herd, Leonard Tramiel, and Hedley Davis.

Continue reading ““The Commodore Story” Documentary Premieres Today” →