arcade

146 Articles

In-depth MAME Cocktail Cabinet Build

September 9, 2009 by 16 Comments

mamebuild31_sm

Recently, a friend of ours got married who is a Ms. Pac-Man fanatic. His best man set out to fulfill the groom’s dream of owning a Ms. Pac-Man cocktail cabinet. The problem is that the unit he was after was selling for $2500. It’s great to buy the real thing (and with guest contributions he did,) but if it’s not available consider building your own.

[Alex] has put together a comprehensive guide for building a MAME cocktail cabinet. Unlike the mini-cabinet we saw last week, this is intended to be used sitting down and features controls on more than one side. His guide details the use of an original arcade CRT or an LCD flat panel, high-end controls via an I-Pac 4 controller, and a PC running MAME and MaLa software for Windows. The result is a professional looking build with controls on three sides of the table.

[via Gizmodo]

Mini MAME Cabinet

September 4, 2009 by 10 Comments

[luis] added to the collection of MAME projects we’ve covered with his mini MAME cabinet build. This is his 5th mini cabinet and features a 5″ PlayStation LCD screen, a joystick, four control buttons, player 1 and 2 start buttons, speakers, and a lighted marquee. The controls are interfaced through an I-PAC and the system running the whole thing is a mini-ITX board with an Atom processor and two gigs of RAM. The build log is in Spanish and takes us all the way from a cardboard prototype to the finished particle board cabinet full of high quality artwork.

Continue reading “Mini MAME Cabinet” →

Neo Geo Mini Arcade

August 9, 2009 by 20 Comments

neopocket

[Pocket Lucho], the builder of mini arcade cabinets, is back with another build. This time it’s a miniature Neo Geo arcade machine (translated). The build is very compact and neat. He attached the control panel and the PS one display using magnets to make the wiring more accessible. It has video out and second player input too. You’ll find an assembly video embedded below along with a trial run. Continue reading “Neo Geo Mini Arcade” →

Things To Hack: Sub 100$ Toy Night Vision, Projector, And Tv Game

June 22, 2009 by 14 Comments

projector

Ars Technica writes about three new toys coming out this year: a sub 100$ projector, tv game, and night vision goggles. The projector runs at standard TV resolution, takes standard composite in, and outputs an okay picture. The night vision goggles are monocular but focus both eyes on a single RGB LCD. The goggles uses an array of IR LEDs instead of amplifying ambient light to see in the dark. Lastly, they have a standalone implementation of the arcade game Big Game Hunters. The rifle uses a sensor bar to do the motion tracking and features a 32MB rom to hold the game files.

Mini Arcade Cabinets

April 15, 2009 by 23 Comments

mini-arcade

[Pocket_Lucho] has really done a fantastic job on this one. He’s making miniature arcade cabinets(translated) from old consoles.  This post is mainly talking about a Sega genisis version, but he’s also done one for the PC engine(aka turbografix 16). He takes us through pulling RGB video strait from the chip as well as harvesting buttons from a cheapo all in one arcade controller. For the screen he’s using a PSone portable LCD, pretty much un modified. What really stands out is the final layout. He has built tiny arcade cabinets, about a foot tall, to house them. These are amazingly awesome and we want one. No, we want an entire mini arcade of them. You can see a video after the break.

Continue reading “Mini Arcade Cabinets” →

Multitouch MAME Cabinet

December 24, 2008 by 19 Comments

mame

[rdagger] sent us this really well done multitouch MAME cabinet build. He ha penned to find a used, and fairly worn cocktail cabinet. The monitor was damaged, keys lost, and internals had been home to mice for some time. He promptly tore out the old guts, replaced the smelly mouse damaged base and began building the projection system. For touch sensing, he’s using a web cam with the IR filter removed to detect disturbances in some IR laser beams. We’re not completely clear on how he mounted the lasers, he skips over that part.  There’s nothing groundbreaking in the technology here, we’ve done multitouch many times before. This project stands out in its execution. [rdagger] has done a fantastic job, the construction looks fantastic.  Check out a video of it working after the break.

Continue reading “Multitouch MAME Cabinet” →