Tokyo Hackerspace Helping Disaster Victims

March 16, 2011 by Mike Szczys 36 Comments

We, like the rest of the world, have watched in horror as footage of the recent earthquake-caused disaster has been reported from northern Japan. It’s easy to watch video and see nothing but distruction, however, life goes on and [Akiba] is looking for a way to help the recovery efforts. He mentions that one of the big needs in the disaster area right now is for light, as the power infrastructure has been heavily damaged. The mason jar seen above is a Kimono Lantern that was meant to accent a garden at night. It has a solar cell – one NiMH rechargeable battery – and one bright LED along with a charging circuit. It was designed in the Tokyo Hackerspace and they released the build files in hopes that a large number can be donated to those in need. With a reasonable amount of daylight, the single cell battery can be charged enough to provide 10 hours of light from the little device.

How can our hacks help others? That question has been on our minds for the last few days. Light is a great first step. But we’ve also wondered about information networks to help coordinate rescue and cleanup workers. There are hacks that bring WiFi using wind power or solar power. What other hacks do you think would be useful to aid in the recovery process?

Kindle 3 Powers This Diy LED Light

February 28, 2011 by Mike Szczys 1 Comment

ePaper displays are easy on the eyes because there’s no flickering backlight to put strain on them. This is great until you’re trying to read in a dim environment. Of course Amazon will sell you a backlight that’s powered from the reader itself if you’re willing to pay. [Txoof] thought the price was a bit too high so he built his own version.

There are two pockets in the top of the Kindle reader for hooks to grab onto. Each has an electrical contact in it and together they provide about 4V of power. To patch into that source [Txoof] cut his own hooks from brass stock and mounted them onto a piece of basswood. He then cut and bent a hood from more of the brass stock to house the LEDs. A series of three of the white diodes draw their power from the hooks and shine onto to the display. As you can see this works just fine, but could benefit from just the right diffuser.

Today’s Arduino Minute

February 10, 2011 by James Munns 15 Comments

Sometimes projects are vast, complicated, and complex. Other times projects are a bit more on the simple. Today we thought we would share a couple projects with something in common that may be familiar sounding to the more experienced crowd, but may inspire a few readers new to the world of microcontrollers.

Continue reading “Today’s Arduino Minute” →

Projector Tricks Make Use Of Kinect 3D Mapping

January 19, 2011 by Mike Szczys 12 Comments

[Don’t stop the clock] is doing some work with a projector, a camera, and the Kinect. What he’s accomplished is quite impressive, combining the three to manipulate light with your body. The image above is a safer rendition of the Hadouken from the Street Fighter video games, throwing light across the room instead of fire. This comes at the end of the video after the break, but first he’ll show off the core features of the system. You can hold up your hand and wave it to turn it into a light source. In other words, the projector will shine light on your hand, moving it, and manipulating the intensity based on hand location in 3D space. Since the Kinect is sending fairly precise data back to the computer the projected image is trimmed to match your hand and arm without overflowing onto the rest of the room until you touch your hand to a surface you want illuminated or throw the light source with a flick or the wrist. It may seem trivial at first glance, but we find the alignment of the projector and the speed at which the image updates to be quite impressive.

Continue reading “Projector Tricks Make Use Of Kinect 3D Mapping” →

Tri-rotor Helicopter With Full Autopilot

January 17, 2011 by Mike Szczys 17 Comments

Quadcopters stand aside, here’s a three-rotor helicopter we think you’re going to love. The body is made out of plywood and carbon fiber rods, keeping it light enough to be easily lifted by just 3 motors while making sure the force doesn’t tear the aircraft apart. Three gyroscopes, two accelerometers, three magnetometers, and a GPS module are all used in conjunction for an autopilot system. There’s a lot of great pictures and videos but our favorite, embedded after the break, shows the tricopter writing messages in the sky using light and camera exposure tricks similar to this ground-based trike.

Continue reading “Tri-rotor Helicopter With Full Autopilot” →

AVR Programming 04: Writing Code, Etc.

November 19, 2010 by Mike Szczys 24 Comments

Welcome back to this fourth and final installment of the series. The first three parts should have been enough to get you off the ground, but a few more learning examples wouldn’t hurt. It’s also a good time to discuss some of the other things these little chips can do. Join me after the break to:

Expand the sample code, adding features to our simple program while I challenge you to write the code yourself.
Discuss AVR fuse bits, how to use them, and what to watch out for
Touch on some of the peripherals you’ll come across in these chips

As a grand flourish to the series, I’ve used the example hardware from this final part to build a bicycle tail light. Hopefully this will inspire you to create something much more clever.

Series roadmap:

Continue reading “AVR Programming 04: Writing Code, Etc.” →

Under-desk RGB Keyboard Lighting

November 11, 2010 by Mike Szczys 34 Comments

[Jay Collett] was having trouble seeing his keyboard when the room was dim. But throwing a light under the desk just didn’t seem cool enough. Instead he built an RGB light board that is controlled by his desktop. The board is based around an ATmega328 with the Arduino booloader. He etched a single-sided PCB to connect it to a group of five RGB LEDs, with a programming header for an FTDI cable. The board communicates with a PC via serial connection, with a C# control application that [Jay] coded to control the color. We’ve embedded a couple of videos after the break but check his page for a package of code and hi-res pictures.

If you want something cool that’s a little bit less work to build check out the EL-wire keyboard from this links post.

Continue reading “Under-desk RGB Keyboard Lighting” →