When utilizing an SD card in your projects, you would generally buy an SD card slot to wire in. Sometimes, you just don’t plan that far ahead, or maybe you just want to play with an SD a little bit to see what you think. [Kroden] shows us how to make a fairly simple and cheap SD card dock. The result is actually pretty impressive looking. He has simply bent some header pins and soldered them together to make a simple SD slot. It can even be adapted to a horizontal layout for more permanent use.
[Ben Heck] has just completed one of his more unique laptop game consoles. This time around it’s a Commodore 64, which he’s been attempting since 2006. Recently he scrapped everything and started fresh on what turned out to be the fastest build yet. While it certainly looks similar to his other laptops, he put in a lot of effort to give it the appearance of an 80’s computer from the beige color to the texture. He used an original C64C motherboard since it was the final and smallest revision and coupled that with an original keyboard. A 1541-III-DTV allows use of an SD card as a floppy device. Just drag any disk image onto the card and it’s ready to go. Check out a video of it in use below.
Former Hack a Day contributor [Will] has been using a Eye-Fi SD card to automate his photo transfers. Unfortunately this requires using Eye-Fi’s software and talking to their servers. He used [Jeff Tchang]’s replacement server written in Python to recieve the images from the card. [Will] manages his own online photo gallery using Gallery 2. To get the images uploaded, he added a call to GUP. Now all of his photos are transfered just as easily as with the standard Eye-Fi but without all of the middleman.
[photo: Eye-Fi teardown]
[les robots] had a defective Eye-Fi card on his hands and when a replacement was sent, he was told to destroy the original. What better way to ‘destroy’ something than opening the case? The Eye-Fi is an SD card with a builtin WiFi radio so it can upload images while remaining in camera. One version uses Skyhook’s location service to geotag photos. You can see a few photos of the dismantled card on Flickr. The board is manufactured by Wintec. The wireless side is handled by Atheros’ ROCm, the same low power Radio-on-Chip module you would find in a mobile phone. The flash memory comes from Samsung and the antenna is along the back edge, where it has the best chance of getting signal.
[skeezix] has got his hands on one of the first Pandora dev kits to make it out the door and took a few photos. This is 1 of the 20 MK2 devboards that were produced. Although, not final it certainly is close to the version they’ll be shipping. Pandora is a Linux based portable game console. The main chip in the clamshell device is a TI OMAP3530. It has OpenGL hardware acceleration and an 800×480 touchscreen. A QWERTY keyboard is included along with analog and digital game controls. WiFi, bluetooth, USB host, TV-out, and dual SDHC card slots round out the package. The team has already presold 4000 devices.
Adafruit has just put their Uzebox based console into production. The Fuzebox is an 8bit game console based around the ATmega644-20PU microcontroller. Full 256 color 240×224 resolution video output is provide by either a composite connection or svideo. There is an SD card slot on board for future expansion. The chip takes care of all the I/O, so you just need to write your game code in C on top of it.
The kit looks easy to assemble. Almost all of the components are through-hole. The video chip is SMD and comes presoldered to the board. The kit has two SNES controller ports included, but you can use NES ports too. There are three ways you can load your program onto the board: 6pin FTDI, ICSP10, and ICSP6.
A coworker approached us today with a corrupted SD card. It was out of her digital camera, and when plugged in, it wasn’t recognized. This looked like the perfect opportunity to try out [Christophe Grenier]’s PhotoRec. PhotoRec is designed to recover lost files from many different types of storage media. We used it from the command line on OSX, but it works on many different platforms.
It’s a fairly simple program to use. We plugged in the card and launched PhotoRec. We were prompted to select which volume we wanted to recover. We selected “Intel” as the partition table. PhotoRec didn’t find any partitions, so we opted to search the “Whole disk”. We kept the default filetypes. It then asked for filesystem type where we chose “Other” because flash is formatted FAT by default. We then chose a directory for the recovered files and started the process. PhotoRec scans the entire disk looking for known file headers. It uses these to find the lost image data. The 1GB card took approximately 15 minutes to scan and recovered all photos. This is really a great piece of free software, but hopefully you’ll never have to use it.
