Adafruit Introduces The Sensor Pack 900

June 22, 2009 by Nick Caiello 9 Comments

adafruit

Our friends over [adafruit] recently released the Sensor Pack 900, a collection of parts for anyone who is interested in using analog sensors with their projects. The pack includes 9 sensors. They range from simple thermistors and hall effect sensors to sharp distance sensors. Also included in the pack are 3 unidentified components that can be used to interface with the analog sensors in the pack. At only $30, the Sensor Pack 900 seems to offer a great set of introductory components for anyone prototyping a new device.

TwypeWriter

June 22, 2009 by Caleb Kraft 14 Comments

in the oomlout offices, everyone loves twitter. They love it so very much, they decided to find new and fun ways to participate. This one is the TwypeWriter. It searches for a keyword and then physically types out the results for everyone to peruse. There are a couple videos of it in action on their site, as well as the source code to make one for your self.

[via the Hack a Day flickr pool]

Atari 2600 Slim

June 22, 2009 by Caleb Kraft 6 Comments

chriskoopa_2222 (Custom)

[Chris-Koopa] sent in this sweet little throwback to the good ol days of Atari 2600. He had been playing his old unit, lamenting the poor visual quality on his new TV when he had an idea. He picked up an Atari flashback2 and began modding. He added a cartridge slot and made some case modifications to make it look more like the 2600. The final result is that he can switch between the built in games, or play strait off of the cartridges with crisp clean video. There are other methods of doing this, like modding the Atari itself or building a whole new console, but this is pretty sweet too.

VR Game Gun

June 21, 2009 by Caleb Kraft 49 Comments

[youtube=http://www.youtube.com/watch?v=7Ym0tZSWGMc]

Many of you have probably experimented with alternative gaming interfaces. Here’s a well done little hack where they created a gun with a display mounted on it, for video gaming. At a glance you can probably figure out exactly what they’ve done. They’ve attached a gyration mouse to the gun for tracking and gutted a keyboard for the buttons. We have to give them some credit, they seem to have packaged it all nicely. Since it’s a standard mouse and keyboard, it just plugs in and works with any game. As you can see in their version, the screen works very well in this configuration, almost seeming like a giant scope. You can see the wireless version and hear their aspirations for projector based models after the break.

Continue reading “VR Game Gun” →

Homemade Toroid Winder

June 20, 2009 by Steve Watkins 17 Comments

[eclipsed78], built an automatic toroid winder (Internet Archive). The drum splits in order to load the toroid. Then wire is wound on the drum, much like any other coil would be wound. The drum rotates as a slider pulls the wire off the drum, while revolving in and out of the toroid. A side tension keeps the slack out of the wire during operation. The winding coil is stepped as the drum rotates, in order to control the turns ratio. [eclipsed78] created a stepper driver from a schematic, so he could drive the motors. You can watch the winder in operation as a series of videos. The first of which is embedded below. If you have ever needed to wind a massive toroidal transformer, this is the project for you.

Continue reading “Homemade Toroid Winder” →

Repair A Malfunctioning LCD

June 20, 2009 by Nick Caiello 43 Comments

When most people encounter dead pixels on an LCD text display, they figure that the display is dead and they decide to scrap it. However when the LCD display on one of [Joe]’s cordless phones started to show dead rows and columns of pixels, [Joe] decided that he could fix it. With only a pencil eraser, a hot air gun, and a screwdriver (for disassembly), [Joe] was able to fix his phone’s screen in just under 10 minutes. His process involves heating the glue holding the LCD’s ribbon cable to the phones PCB with a hot air gun and using a pencil eraser to reattach segments of the ribbon cable to the PCB. If anyone here has a problem similar to [Joe]’s, be sure to check out his detailed how-to complete with step-by-step pictures.

USB Reader For SNES Game Carts

June 19, 2009 by Gerrit Coetzee 82 Comments

[youtube=http://www.youtube.com/watch?v=Pwq6vRM8U7k]

Reader, [Matthias_H], sent in a video about his USB adapter for SNES game carts. All you have to do is plug in the SNES game cartridge and USB cable, then a ROM file of the game shows up as an external storage device on your computer. After that, you can play the ROM with your choice of emulator. We emailed [Matthias] asking for more information, and he quickly replied with a very nice writeup about the hack that is pasted below.

Update: [Matthias] launched a site for the “snega2usb” with updates on the development of the board and a FAQ.

Continue reading “USB Reader For SNES Game Carts” →