Hackaday Links: February 17, 2019

February 17, 2019 by Brian Benchoff 43 Comments

There is a population of retrocomputing enthusiasts out there, whose basements, garages, and attics have been taken over by machines of years past. Most of the time, these people concentrate on one make; you’re an Apple guy, or you’re a Commodore guy, or you’re a Ford guy, or you’re a Chevy guy. The weirdos drive around with an MSX in the trunk of an RX7. This is the auction for nobody. NASA’s JPL Lab is getting rid of several tons of computer equipment, all from various manufacturers, and not very ‘vintage’ at all. Check out the list. There are CRT monitors from 2003, which means they’re great monitors that weigh as much as a person. There’s a lot of Sun equipment. If you’ve ever felt like cleaning up a whole bunch of trash for JPL, this is your chance. Grab me one of those sweet CRTs, though.

Last week, we published something on the ‘impossible’ tech behind SpaceX’s new engine. It was reasonably popular — actually significantly popular — and got picked up on Hacker News and one of the Elon-worshiping subreddits. Open that link in one tab. Now, open this link in another. Read along as a computer voice reads Hackaday words, all while soaking up YouTube ad revenue. What is our recourse? Does this constitute copyright infringement? I dunno; we don’t monetize videos on YouTube. Thanks to [MSeifert] for finding this.

Wanna see something funny? Check out the people in the comments below who are angry at a random YouTuber stealing Hackaday content, while they have an ad blocker on.

Teenage Engineering’s OP-1 is back in production. What is it and why does it matter? The OP-1 is a new class of synthesizer and sampler that kinda, sorta looks like an 80s Casio keyboard, but packed to the gills with audio capability. At one point, you could pick one of these up for $800. Now, prices are at about $1300, simply because production stopped for a while (for retooling, we’re guessing) and the rumor mill started spinning. The OP-1 is now back in production with a price tag of $1300. Wait. What? Yes, it’s another case study in marketing: the best way to find where the supply and demand curves cross is to stop production for a while, wait for the used resellers to do their thing, and then start production again with a new price tag that people are willing to pay. This is Galaxy Brain-level business management, people.

What made nerds angry this week? Before we get to that, we’re gonna have to back track a bit. In 2016, Motherboard published a piece that said PC Gaming Is Still Way Too Hard, because you have to build a PC. Those of us in the know realize that building a PC is as simple as buying parts and snapping them together like an expensive Lego set. It’s no big deal. A tech blog, named Motherboard, said building a PC was too hard. It isn’t even a crack at the author of the piece at this point: this is editorial decay.

And here we are today. This week, the Internet reacted to a video from The Verge on how to build a PC. The original video has been taken down, but the reaction videos are still up: here’s a good one, and here’s another. Now, there’s a lot wrong with the Verge video. They suggest using a Swiss army knife for the assembly, hopefully one with a Philips head screwdriver. Philips head screwdrivers still exist, by the way. Dual channel RAM was completely ignored, and way too much thermal compound was applied to the CPU. The cable management was a complete joke. Basically, a dozen people at The Verge don’t know how to build a PC. Are the criticisms of incompetence fair? Is this like saying [Doug DeMuro]’s car reviews are invalid because he can’t build a transmission or engine, from scratch, starting from a block of steel? Ehhh… we’re pretty sure [Doug] can change his own oil, at least. And he knows to use a screwdriver, instead of a Swiss army knife with a Philips head. In any event, here’s how you build a PC.

Hackaday writers to be replaced with AI. Thank you [Tegwyn] for the headline. OpenAI, a Musk and Theil-backed startup, is pitching a machine learning application that is aimed at replacing journalists. There’s a lot to unpack here, but first off: this already exists. There are companies that sell articles to outlets, and these articles are produced by ‘AI’. These articles are mostly in the sports pages. Sports recaps are a great application for ML and natural language processing; the raw data (the sports scores) are already classified, and you’re not looking for Pulitzer material in the sports pages anyway. China has AI news anchors, but Japan has Miku and artificial pop stars. Is this the beginning of the end of journalism as a profession, with all the work being taken over by machine learning algorithms? By vocation, I’m obligated to say no, but I have a different take on it. Humans can write better than AI, and the good ones are nearly as fast. Whether or not the readers care if a story is accurate or well-written is another story entirely. It will be market forces that determine if AI journalists take over, and if you haven’t been paying attention, no one cares if a news story is accurate or well written, only if it caters to their preexisting biases and tickles their confirmation bias.

Of course, you, dear reader, are too smart to be duped by such a simplistic view of media engagement. You’re better than that. You’re better than most people, in fact. You’re smart enough to see that most media is just placating your own ego and capitalizing on confirmation bias. That’s why you, dear reader, are the best audience. Please like, share, and subscribe for more of the best journalism on the planet.

3D Printed Wheels Get Some Much Needed Grip

January 30, 2019 by Tom Nardi 11 Comments

You’d be hard-pressed to find more ardent supporters of 3D printing then we here at Hackaday; the sound of NEMA 17 steppers pushing an i3 through its motions sounds like a choir of angels to our ears. But we have to admit that the hard plastic components produced by desktop 3D printers aren’t ideal for a number of applications. For example, the slick plastic is useless for all but the most rudimentary of wheels. Sure there are flexible filaments that can give a printed wheel a bit of grip, but they came with their own set of problems (not to mention, cost).

In the video after the break, [Design/Forge] demonstrates a clever method for fitting polyurethane rubber “tires” onto 3D printed hubs which is sure to be of interest to anyone who’s in the market for high quality bespoke wheels for their project. The final result looks extremely professional, and while there’s a considerable amount of preparation that goes into it, once you’re set up you should be able to pump these out quickly and cheaply.

The process begins with a 3D printed mold pattern, which includes the final tire tread texture. This means you can create tire treads of any design you wish, which should have some creative as well as practical applications. The printed part is then submerged in silicone rubber and allowed to cure for 8 hours. Once solidified, the silicone rubber becomes the mold used for the next steps, and the original printed part is no longer needed.

The second half of the process is 3D printing the wheels to which the tires will be attached. These will be much smaller than the original 3D printed component, and fit inside of the silicone mold. The outside diameter of the printed wheel is slightly smaller than the inside diameter of the mold, which gives [Design/Forge] the space to pour in the pigmented polyurethane rubber. The attentive viewer will note that the 3D printed wheel has a slight ribbed texture designed into it, so that there will be more surface area for the polyurethane to adhere to. Once removed from the mold and cleaned up a bit, the final product really does look fantastic; and reminds us of a giant scale LEGO wheel.

Whether you’re casting metal parts or just want a pair of truly custom earbuds, creating silicone molds from 3D printed parts is an extremely useful skill to familiarize yourself with. Though even if you don’t have a 3D printer, there’s something to be said for knowing how to mold and cast real-world objects as well.

Continue reading “3D Printed Wheels Get Some Much Needed Grip” →

Sorter Uses Cardboard To Organize Card Hoard

January 26, 2019 by Kristina Panos 13 Comments

If you collect trading cards of any kind, you know that storage quickly becomes an issue. Just ask [theguymasamato]. He used to be really into trading cards, and got back into it when his kids caught the bug. Now he’s sitting on 10,000+ cards that are largely unorganized except for a few that made it into sleeve pages. They tried to go through them by hand, but only ended up frustrated and overwhelmed. Then he found out about [Michael Portera]’s Pi-powered LEGO card sorter and got all fired up to build a three-part system that feeds cards in one by one, scans them, and sorts them into one of 22 meticulously-constructed cardboard boxes.

[theguymasamato]’s card sorter is the last stop for a card after the feeder has fed it in from the pile and the scanner has scanned it. The sorter lazy Susans around on a thrust bearing, which is driven by a 3D printed drive wheel attached to a stepper. The stepper is controlled with an Arduino.

Here’s where it gets crazy: the drive wheel and timing belt are made from the flutes of corrugated cardboard. As in, he used that wavy bit in the middle as gear teeth. Every one of those cardboard teeth is fortified with wood glue, a time-consuming process he vows to never repeat. Instead, [theguymasamato] recommends using shims to shore them up as he did in the card feeder. The whole thing was originally going to be made from cardboard. It proved to be too mushy to support the thrust bearing, so [theguymasamato] switched to MDF.

Right now, the sorter is homed via button press, but future plans for the device include an IR break beam switch. We’re excited for the scanner and can’t wait to see the whole system put together. While [theguymasamato] works on that, position yourself past the break to watch the build video.

Continue reading “Sorter Uses Cardboard To Organize Card Hoard” →

Raspberry Pi Jukebox Hits All The Right Notes

January 22, 2019 by Tom Nardi 2 Comments

We (and by extension, you) have seen the Raspberry Pi crammed into nearly every piece of gear imaginable. Putting one inside a game console is so popular it’s bordering on a meme, and putting them into old stereos and other pieces of consumer electronics isn’t far behind. It’s always interesting to see how hackers graft the modern Raspberry Pi into the original hardware, but we’ll admit it can get a bit repetitive. So how about somebody scratch building an enclosure for their jukebox project?

[ComfortablyNumb] took the road less traveled when he created this very nice wooden Raspberry Pi enclosure in the shape of an eighth note. Stained and varnished and with a nice big touch screen in the middle to handle the controls, it’s an attractive and functional piece of home audio gear that we imagine most people would be happy to hang on their wall.

The process starts by printing out the desired shape on a piece of paper to use as guide, and then gluing together strips of wood to create the rough outline. Then the surface was thoroughly sanded to bring all of the strips of wood to the same level, and the final design was cut out. On the back of the note, [ComfortablyNumb] boxed out an area to hold the Waveshare seven-inch touch screen panel and the Raspberry Pi itself.

Having seen so many projects where the Pi is rather unceremoniously shoehorned into another device, it’s refreshing to see the results of a purpose-built enclosure. Since [ComfortablyNumb] was able to build the electronics compartment to his exact dimensions, the final result looks exceptionally clean and professional. Not a drop of hot glue to be seen. It also helps that this build only required the Pi and the display; as the device is meant to be plugged into an existing audio setup, there’s no onboard amplifier. The audiophiles out there might recoil in horror, but adding a dedicated digital to analog converter (DAC) would be easy enough to add if the stock audio on the Pi isn’t good enough for you.

The project is finished off with stain and several coats of varnish to get that deep and rich color. We don’t often find ourselves working with dead trees around these parts, but we’ve got to admit that the final product does look quite handsome. Certainly beats the LEGO cases many of our Pi projects live in.

If you’re looking for more wooden-encased Pi jukeboxes, you might enjoy this somewhat abstract magstripe-based take on the concept. Of course, we’ve also seen our fair share of actual jukeboxes receive a Raspberry infusion over the years.

[via /r/raspberry_pi]

Hackaday Links: January 20, 2019

January 20, 2019 by Brian Benchoff 18 Comments

Let’s say you’re an infosec company, and you want some free press. How would you do that? The answer is Fortnite. Yes, this is how you hack Fortnite. This is how to hack Fortnite. The phrase ‘how to hack Fortnite’ is a very popular search term, and simply by including that phrase into the opening paragraph of this post guarantees more views. This is how you SEO.

Lasers kill cameras. Someone at CES visited the AEye booth, snapped a picture of an autonomous car at AEye’s booth, and the LIDAR killed the sensor. Every subsequent picture had a purple spot in the same place. While we know lasers can kill camera sensors, and this is a great example of that, this does open the door to a few questions: if autonomous cars have LIDAR and are covered in cameras, what’s going to happen to the cameras in an autonomous car driving beside another autonomous car? Has anyone ever seen more than one Cruise or Waymo car in the same place at the same time? As an aside, AEye’s company website’s URL is aeye.ai, nearly beating penisland.net (they sell pens on Pen Island) as the worst company URL ever.

This is something I’ve been saying for years, but now there’s finally a study backing me up. Lego is a viable investment strategy. An economist at Russia’s Higher School of Economics published a study, collecting the initial sale price of Lego sets from 1987 to 2015. These were then compared to sales of full sets on the secondary market. Returns were anywhere between 10 and 20% per year, which is crazy. Smaller sets (up to about 100 pieces) had higher returns than larger sets. This goes against my previous belief that a Hogwarts Castle, Saturn V, and UCS Falcon-heavy portfolio would outperform a portfolio made of cheap Lego sets. However, this observation could be tied to the fact that smaller sets included minifig-only packaging, and we all know the Lego minifig market is a completely different ball of wax. The Darth Revan minifig, sold as an exclusive for $3.99 just a few years ago, now fetches $35 on Bricklink. Further study is needed, specifically to separate the minifig market from the complete set market, but the evidence is coming in: Lego is a viable investment strategy, even when you include the 1-2% yearly cost of storing the sets.

Relativity Space got a launchpad. Relativity Space is an aerospace startup that’s building a rocket capable of lobbing my car into Low Earth Orbit with a methalox engine. They’re doing it with 3D printing. [Bryce Salmi], one of the hardware engineers at Relativity Space, recently gave a talk at the Hackaday Superconference about printing an entire rocket. The design is ambitious, but if there’s one device that’s perfectly suited for 3D printing, it’s a rocket engine. There are a lot of nonmachinable tubes going everywhere in those things.

MIT Scratch 3.0 Opens New Doors For Users And Builders Alike

January 9, 2019 by Roger Cheng 26 Comments

We typically feature projects from people sharing what they’ve learned while building something for themselves. But our community has a healthy contingent who deploy their skills for the benefit of future generations, developing a child’s natural curiosity for play into interest in understanding the technical world they will grow up in. This field is where MIT’s release of Scratch 3.0 can open up interesting possibilities.

Scratch is a block-based programming language designed for elementary school children, letting them learn fundamental concepts while experimenting in an environment filled with visual and audible feedback. In an effort to make Scratch more widely available, version 2.0 in 2013 moved to the web. But it was built using interactive web technology of the time: Adobe Flash. As Flash has fallen out of favor and scheduled to be phased out in 2020, Scratch 3.0 used React to make the shift to HTML5.

The most immediate benefit is that Scratch can now be used on tablets, which all have modern browsers but very few of which have Flash. Another common educational hardware platform is the Raspberry Pi, which supported Scratch 2 via a convoluted software stack that was far from ideal. Now any hardware with a modern browser can run Scratch, no Flash binaries or custom wrappers are required. The Raspberry Pi foundation certainly seemed excited about this change.

But a more exciting and longer term benefit is Scratch extensions, a mechanism for Scratch programs to communicate with external hardware and online resources. This has evolved in parallel with Scratch 2.0 under the experimental ScratchX umbrella and version 3.0 brings it into core. The launch featured a few official extensions (for connecting to micro:bit, LEGO Mindstroms EV3, etc.) with the promise that custom third-party extensions will soon be possible. This will significantly streamline building a Scratch interface for kid-friendly programmable hardware. Something we’ve seen done for a drone, for exploring SDR, and even for a dollhouse. We’ll be keeping an eye out for the official release of Scratch 3.0 custom extension API, but anyone not afraid of working with fluid pre-release code are certainly welcome to dive in right now.

ABS: Three Plastics In One

December 11, 2018 by Dan Maloney 31 Comments

It would be really hard to go through a typical day in the developed world without running across something made from ABS plastic. It’s literally all over the place, from toothbrush handles to refrigerator interiors to car dashboards to computer keyboards. Many houses are plumbed with pipes extruded from ABS, and it lives in rolls next to millions of 3D-printers, loved and hated by those who use and misuse it. And in the form of LEGO bricks, it lurks on carpets in the dark rooms of children around the world, ready to puncture the bare feet of their parents.

ABS is so ubiquitous that it makes sense to take a look at this material in terms of its chemistry and its properties. As we’ll see, ABS isn’t just a single plastic, but a mixture that takes the best properties of its components to create one of the most versatile plastics in the world.

Continue reading “ABS: Three Plastics In One” →