Target Hunting UAV Armed With Fireworks

January 31, 2011 by 39 Comments

Don’t just build a UAV, use it to blow things up. In this case a tri-copter seeks out colored balloons and pops them using low-grade fireworks. We’ve seen this type of flying armament before, but not in a ‘copter form factor. It looks like the targeting and firing is done by an operator, and is not an automated system despite what the text overlays on the video after the break says. The lack of autonomous firing capability makes this delightful, rather than scary. Don’t miss the build log for the tri-copter itself. How do you think this one stacks up to the last 3-bladed build?

Continue reading “Target Hunting UAV Armed With Fireworks” →

How To Build A Ping-pong Ball Display

January 31, 2011 by 41 Comments

If you’ve been lusting after your own glowing display we’re here to help by sharing some simple building techniques that will result in an interesting project like the one you see above. This is a super-accurate clock That uses ping-pong balls as diffusers for LEDs, but with a little know-how you can turn this into a full marquee display. Join me after break where I’ll share the details of the project and give you everything you need to know to build your own.

Continue reading “How To Build A Ping-pong Ball Display” →

Printable Wax As PCB Etch Resist

January 31, 2011 by 28 Comments

What if there were only two steps for making your own printed circuit board; print, etch? That’s what [Jeff Gough] has been working on and he presented the process in his talk at 27C3. In the first portion of the video after the break [Jeff] talks about various industrial PCB manufacturing processes in a depth you may not have heard before. We found it to be interesting but at about thirty minutes into the clip he begins the presentation of his modified printer. It’s an inkjet that can print wax onto copper clad board. The wax acts as a resist for chemical etchants, and provides very high resolution. He’s using a heavily modified print head, which brings to mind that diy piezo inkjet head which also has wax printing in its future plans. This certainly seems promising and if the process can be simplified it might do away with the toner transfer method.

Continue reading “Printable Wax As PCB Etch Resist” →

“Ask An Engineer” Live Streams At Adafruit

January 31, 2011 by 6 Comments

I [Caleb], finally had a chance to catch one of the live chat sessions over at Adafruit.com called “Ask an engineer“. I was pleasantly surprised. Though the show is only an hour long, the amount of information covered was quite amazing. They started out, announcing a new, this really cool looking touch screen system, product and going over the tech specs. This very quickly turned into a question and answer session about how to utilize and modify the device. [Limor], aka [ladyada] was extremely knowledgeable and [rossum], the designer who made it even showed up in the chat to fill in the rare gap. After that, there was a general question and answer period where people were firing off questions so fast I couldn’t watch them all and still follow her answers. It was a lot of fun and quite frankly felt way too short.

Be sure to check it out on Saturday night at 10:00 P.M. ET

Drop F-bombs Into A Magic 8-ball

January 31, 2011 by 15 Comments

People in search of something profane to adorn their coffee table need look no further. [Wizgirl’s] magic 8-ball hack lets you change the messages inside, and her messages all include the most powerful of four-letter-words. To do so she completely replaced the message cube inside with one she built from a sheet of plastic, plastic label-maker labels for messages, and craft googly eyes to make it float… Brilliant.

The whole thing was reassembled along with the original fluid but she’s not done yet. A bit of creative case modifications leaves this magic 8-ball looking like a cartoon bomb, complete with a thick white fuse. She’s now the proud owner of a magic f-bomb.

[Thanks Osgeld]

Evalbot Nunchuck Control

January 31, 2011 by 16 Comments

[Martin] got his evalbot recently and wanted to try controlling it with his Wii nunchuck. After some trial and error, he finally got it working. He’s shown that controlling the bot with the nunchuck was actually pretty simple, but there are some other tips that could be pretty helpful in the process. One was the fact that the point where he’s taking power for the nunchuck could easily be shorted on the motor. He wrapped his in tape, but we could see this little bug pestering us for a while before we figured out what it was.  You can download his code and see his build process on his site. Be sure to catch the video of it working in both accelerometer and joystick mode after the break.

Continue reading “Evalbot Nunchuck Control” →

Insane Covert IR Illumination

January 31, 2011 by 37 Comments

[Onironaut] over at lucidscience sent us a link to his latest project, some IR illumination panels. At first, we were mildly enticed by his usual high standard of photography and description. It was just an array of LEDs though. Still, we kept hitting the “next page” button because he goes into such great detail. Then we saw version two. Instead of simply being an array of IR LEDs mounted outside for his security camera, he has mounted 1536 IR LEDs inside an old flat panel monitor. That’s a fake monitor producing 180 watts of IR light, and we think that’s even at half power!  He replaced the screen of the display with one way mirror, so you would have no idea that it isn’t just a normal screen sitting on his desk.  Great job as usual [Onironaut].