DS1307 Breakout Board

July 26, 2010 by Mike Szczys 28 Comments

Adafruit’s got a handy breakout board for the DS1307 RTC available. This chip isn’t nearly as accurate as the DS3231 used in the Chronodot but it’s quite a bit cheaper. The breakout makes this easy to breadboard or plug into an Arduino and has everything you need; clock crystal, a backup battery, filtering capacitor, and pull-up resistors. Our favorite part is that Adafruit designs are open source so you can etch the board yourself if you checkout the files from their git repository. This will make a great addition to our prototyping hardware collection.

Incidentally, we were surprised to see the choice of 2.2k resistors for the I2C bus pull-ups. We were under the impression that 4.7k was a standard value here. We’d love to hear your thoughts on this in the comments.

[via Dangerous Prototypes]

Long Arms Required, Electronic Trombone

July 26, 2010 by Jakob Griffith 23 Comments

[youtube http://www.youtube.com/watch?v=0sX4Dleqz_0&feature=player_embedded%5D

Sadly, the video above is the only information we were able to find on the “Double Slide Controller” trombone, built by composer Tomás Henriques. As well as, the instrument took first place in the Georgia Tech Center Guthman Musical Instruments Competition. Right in front of a Bluetooth bow for violins, and a circuit bending group from New York, and…wait; it beat out our favorite modified didgeridoo? Better luck next year.

Hackaday Links: July 25, 2010

July 25, 2010 by Mike Szczys 20 Comments

Radio Receiver

If you never got the chance to build one as a kid [JoOngle] takes you through the steps to build your own radio receiver. Details are a bit scarce but it’s nothing your friend Google can’t help you out with.

Fixing a Blackberry trackball

If your Blackberry trackball stops working well you can try this non-technical fix. Remember when mice used to have a ball in them and you would need to clean out the gunk from time to time? Forcefully skidding your Blackberry across a piece of paper does a similar service.

Linux time lapse

Open source can be a great help to small businesses. Here’s a way to use a Linux machine to make time-lapse movies from surveillance camera feeds. We especially enjoy the use of a desktop wallpaper that has the terminal commands necessary to start recording.

Host a webpage with Dropbox

Here’s a way to host a simple webpage using Dropbox. It’s one of those easy ideas that you wouldn’t come up with yourself. When you place an HTML file in your Dropbox you can get a public URL which will be built as a webpage when visited with a browser.

Inline splicing

To round out the weekend here’s [Osgeld’s] tips on inline wire splicing. We laughed as he recounted spearing himself with stray strands. This is pretty simple stuff but he’s explained it well and who’s to pass up a good tip?

Alternative Morse Code Keys

July 25, 2010 by Mike Szczys 18 Comments

Add a bit of interest to your radio equipment with one of these unorthodox CW keys. [OH6DC] has been hard at work posting almost sixty of these hacks. Above you can see an alarm clock whose snooze button acts as the key, and a nail clipper used as a key. There’s a banana , a cross-country ski shoe , and a toaster key. The rest you’ll have to see for yourself. Any of these would work perfectly with that Morse code keyboard you’ve been wanting to build.

Guitar Effect Shield For Maple

July 25, 2010 by Mike Szczys 10 Comments

[Okie] designed this audio effect shield for Maple. You’ll remember that Maple is a prototyping system built around an ARM processor, so there’s plenty of power and speed under the hood. First and foremost, the shield provides input and output filters to keep noise out of the system. From there a set of potentiometers let you change the effect, with the manipulation like echo, distortion, and ring modulation happening in the firmware.

Extremely Organized Prototyping

July 25, 2010 by Mike Szczys 55 Comments

We’ve got a couple of very high-tech shoe boxes in which we store our prototyping accessories. You’ll find a collection of LCD modules, chips on breakout boards, switches soldered to homemade boards for easy breadboarding, and much more. That is assuming you can find anything in that mess of components.

[Shahriar] took a different approach. He’s mounted all of his prototyping gear inside of a briefcase. This large collection of high-end boards include PIC prototyping, various LCD screens, and a large portion of SparkFun’s stocked boards. It’s much more advanced than the Arduino to-go platform, and you can see a full walk through of the system after the break.

Continue reading “Extremely Organized Prototyping” →

Daft Punk Helmet Replica Finally Completed

July 24, 2010 by Mike Szczys 65 Comments

[Harrison Krix] finished his Daft Punk Helmet replica and posted about it this week. We took a look at his work back in October but he’s come a long way to pull off a legendary build. Take three minutes after the break and see 17 months worth of work. So many skills were pulled together to make this happen; sculpting, mold making, painting, electronic design, mechanical design, and bad-ass-ery. Crammed in along with your noggin are a bag-full of LED boards but the Arduino that controls it all resides outside, in a project box tethered to the helmet. This is a masterpiece of socially-unwearable geek fashion.

Continue reading “Daft Punk Helmet Replica Finally Completed” →