Mouse Runs Through VR Maze

vr_mouse_setup

In an effort to determine the brain of animals during movement, scientists have built this contraption. It is a VR pod for a mouse. While we’re pretty sure/hopeful that none of you need a mouse VR system, we think the rig is interesting enough to stand on its own. It appears to be a convex mirror setup, projected in a dome. The controller is interesting in that it looks like a giant trackball hack. They’re using an optical mouse rigged to a ball floating on a cushion of air. This makes it much easier for the mouse to move. There’s a video of the whole thing in action after the break.

Continue reading “Mouse Runs Through VR Maze” →

Skittles, The Robotic Blimp

Blimp 4_0

Funky Shiitake Mushrooms, a high school design team from Fremont, CA, have created a low cost airship they call Skittles the Second. Skittles is a remote control robotic blimp, complete with 4 reversible propellers, wireless video, and 2.4 a GHz remote control. Somewhere between a regular RC  blimp and a Predator Drone, Skittles and FSM have managed to gain a large number of awards including winning the Digital Open grand prize. The ship performs amazingly, and can perform a full 360 in just over one second. There is a video after the break.

For the future, the group plans to give the ship autonomous capabilities, in order to avoid losing another drone in strong wind. Fortunately, after that happened to Skittles the first, they were able to hunt it down after it had floated 3 miles down the road. Since they are all high school students under 17, we would say they have a lot of potential. I, for one, welcome our new robotic blimp overlords.

Continue reading “Skittles, The Robotic Blimp” →

RFID-enabled Robot…mood…tail…thingy.

moodtail

Furries: is there nothing they cannot do? Well okay, “shower” remains an elusive concept, but wearable technology seems to be in, as evidenced by this robotic mood tail. [Wei-Chieh Tseng]’s adorable Arduino-driven fashion accessory operates either via Wii Nunchuk or a set of RFID cards tagged with specific emotions to depict.

Details are scant. It appears to have been a project for a physical computing or design class. One thing’s for certain: Halloween is going to be awesome.

[via Engadget]

Animatronic Winged Demon Terrorizes Local Garage

WingedDemonVideo005

Halloween is on its way, and if you’re going to do it right, you’re going to overdo it right. A few days ago we showed you [Jake’s] flying Crank Ghost, the idea is simple and creates lovely motion that is sure to scare some small children. But what if you want people leaving your little shop of horrors needing a new pair of pants? Meet the Animatronic Winged Demon by [Woody]. Very little info is given except for the touch screen controller, the central control system, and his unique use of a modular skeleton, but the project is very impressive none the less. If the demon doesn’t scare you, take a look at the miles of wires needed to control it. Check out a video after the break.

[via HackedGadgets] Continue reading “Animatronic Winged Demon Terrorizes Local Garage” →

Sphere Bots Get Some New Skills

[youtube=http://www.youtube.com/watch?v=OWkK-o4Vq-A]

Spherical robots , or in this case RC vehicles are pretty versatile. They travel about the same on most terrains, including water in some cases. That’s not to say that they travel particularly well on those terrains though. The common problem is that they can’t really climb over bumps very well, until now. We’ve seen a few versions of sphere bots, but they all seem to need fairly level smooth surfaces, aside from that one that went in the water. We hadn’t seen any that really had the oomph necessary to climb stairs though. Actually, we still haven’t seen that, but he says it can in the interview you can watch after the break.

Continue reading “Sphere Bots Get Some New Skills” →

72 LED Persistence Of Vision Globe

HaD-pov-globe

[Ben] told us about his POV globe yesterday. We took a look and saw just one photo and the code with no real explanation of his project. He certainly set to work over night and now we see all the goodies we look for in a great build log. He even threw the Hackaday logo up for our enjoyment. His build is well executed and he found some creative ways around the common problems in these projects. We take a closer look after the break. Continue reading “72 LED Persistence Of Vision Globe” →

Halloween Prop: DIY Fog Machine

diy-fog-machine

Reader [Daniel] told us about a video detailing how to make your own fog machine. This project uses two disposable roasting pans to create a fog chamber. Inside you will find an upside-down clothes iron to convert fog liquid into a gas. The liquid is gravity-fed from a water-bottle reservoir on top, converted to smoke by the hot iron, then the newly created smoke is directed out of the chamber by a 12 volt fan.

You probably have an old iron sitting around (especially if you use the toner transfer method for making PCBs), as well as a fan of some type. The build method used in the video is not at the level we usually look for. Using one blade of a pair of scissors is not what we recommend for stripping wire insulation. We also don’t advocate hot gluing a wire to a battery for a reliable connection (for that you’d want wire glue). But with better building techniques, and perhaps an air intake fan for better fog direction, this has potential.

The project is predicated on the availability of “fog juice”. We’re probably not going to head out and buy a bottle of that so look into making some yourself from glycerin and demineralized water.