Morphing Robot Demonstrated At IROS

morphing-robot

A morphing robot was demonstrated at the IROS conference this week. This orb has no rigid structure but uses some type of “inflation” system for locomotion. This robot concept is offered up by the iRobot company as part of a DARPA initiative they’re working on. The “inflation” is really a substance in the skin that can be converted from a liquid-like state to a solid-like one. They call this “The Jamming Concept” and give a layman’s explanation in the video we’ve embedded after the break.

When moving, this white ball is a churning, turning, bulging mass of terror. The just-about-to-hatch pods from Alien, or perhaps something from Doom 3 come to mind. The hexapod from IROS that we covered yesterday was amazing, but this really creeps us out. What’s more, this is footage from the iRobot prototypes of a year ago.  The newer stuff can do much more, like having several of these things glob together into one unit.

We’re glad that [DarwinSurvior] sent us the tip on this one, but now we’re not going to be able to sleep at night.

Continue reading “Morphing Robot Demonstrated At IROS” →

Turntable Sequencer Scratches With Coins

scratching-with-arduino

[tvst] has an interesting take on a sequencer. His design uses coins on a turn table to trigger midi events in a loop. There are four tracks available, each having its own sensor above the spinning platform. The sensors consist of an IR transmitter and receiver setup as a voltage divider. When something passes below the IR transmitter and reflects the infrared waves back up to the receiver, the output of the sensor moves to digital high. The four sensors are connected to an Arduino which is used in conjunction with ttymidi, which converts the Arduino data into midi events.

We like projects that provide a more tangible interface for the user. Coins work well for this setup. They reflect infrared enough to trigger the sensors, and they’re easy to pick up and move without upsetting the rest of the tracks. It would be great if this could be expanded to differentiate between coins (pennies versus dimes, etc.) in order to increase the resolution from four different events to eight or more. Check out the video after the break. Continue reading “Turntable Sequencer Scratches With Coins” →

NES Guitar

[youtube=http://www.youtube.com/watch?v=2WUNyImfBPQ]

[Dave] set out to build the ultimate NES guitar. He’s apparently done a pretty good job, this thing is pretty remarkable. Every detail is covered in NES goodness. The body is a console, the head is a cartridge, his knobs are even replaced by goofy little heads of Mario and friends. We think he should do some custom pixel art inlays in the fretboard next. Skip to about 2:00 to hear him play a Nintendo medley on it.

Finally, A Keyboard For The IPhone

1941564841616847948

We can’t say we’ve had problems typing on our iPhones here at HackaDay, must be the elfin fingers, but for [Ben Kurtz] it was a real pain. The obvious solution is to carry around an Arduino, 9 volt battery, iPhone breakout board, a ps2 keyboard, and of course the iPhone itself. Well, maybe it could be a little smaller with fewer parts, but at least it works. The Arduino reads input from the keyboard and converts it to serial, then the iPhone pulls the data via VNC. Like we said, a little roundabout, but we love the amount of ingenuity involved.

Snega2usb Preorder Now Available

[youtube=http://www.youtube.com/watch?v=ySs4cRVzPAY]

We’ve been watching the development of the snega2usb since it’s debut on Hackaday. Now it’s grown up and is ready to be manufactured. In the low quality video above [Matthias] shows some of the latest high quality additions to the board. It now has a case, shiny new firmware,  production made PCB, and game pad ports.  The snega2usb is shipping this December for those who preorder now.

Online Chip Reference Trims The Fat

partsdb

Quick: which pins are used for I2C on an ATmega168 microcontroller?

If you’re a true alpha geek you probably already know the answer. For the rest of us, ChipDB is the greatest thing since the resistor color code cheat sheet. It’s an online database of component pinouts: common Atmel microcontrollers, the peripheral ICs sold by SparkFun, and most of the 4000, 7400 and LMxxx series parts.

The streamlined interface, reminiscent of Google, returns just the essential information much quicker than rummaging through PDF datasheets (which can also be downloaded there if you need them). And the output, being based on simple text and CSS, renders quite well on any device, even a dinky smartphone screen.

Site developer [Matt Sarnoff] summarizes and calls upon the hacking community to help expand the database:

“The goal of my site isn’t to be some comprehensive database like Octopart; just a quick reference for the chips most commonly used by hobbyists. However, entries still have to be copied in manually. If anyone’s interested in adding their favorite chips, they can request a free account and use the (very primitive at this point) part editor. Submissions are currently moderated, since this is an alpha-stage project.”