Experiments In Polaroid

February 20, 2009 by 16 Comments

polaroidpage

[Peter] found that Polaroid film was an easy medium to play with, as the ability to develop it is built in. He has done several fun experiments, from electrocuting it to making giant mozaics. The Polaroid film may not be easy to get your hands on though. They stopped producing it in the summer of 2008. Some former employees are trying hard to get it back into production, but that may never happen. Polaroid has recently received permission to sell itself at auction. We’ll just have to wait and see.

Flatpack Walker

February 20, 2009 by 9 Comments

flatpack

If you’re into robotics, you’re probably already familiar with the 2 motor walker. This design, usually used in B.E.A.M. robotics is a pretty easy way to make a 4 legged walking robot. [Edwindertien] has made the design a little bit easier to build with these flatpack walker plans. He used 4mm thick birch, cut by laser to get his walker into shape, but the design would work with almost any material. His walker is Arduino powered, so it could be programmed for all kinds of behavior, especially if you add some sensors. You can see his bot in action after the break.

Continue reading “Flatpack Walker” →

Stantum’s High Precision Multitouch

February 19, 2009 by 9 Comments

touch

We love keeping track of new interaction technologies and this new touchscreen by Stantum looks especially promising. Engadget shot a hands-on video with it at the Mobile World Conference. It’s a resistive screen, so it can be used with both fingers and styluses (unlike capacitive screens). It’s sensitive enough that you could use a brush too. The screen supports any number of multitouch points and does pressure sensing based on the size of the detected fingertip. The touch detection is actually more accurate than the screen can display. Stantum is hoping mobile manufactures will pick up their input framework for inclusion in new devices. The resistive touchscreen was built to Stantum’s specifications (it won’t work with current phones), but they say it wouldn’t be hard to go into mass production.

Segway And Input Filtering

February 19, 2009 by 25 Comments

seg

[Kerry] is building a segway type vehicle for a senior project. Though it doesn’t appear to be done yet, there is some good work finished. As with any balancing bot, it relies heavily on input from a gyroscope, and at least in this case, an accelerometer. That data can be very messy. The sensitivity of the sensor means that people often end up with vibrating or drifting in their projects. [Kerry] has put some work into finding a method of smoothing that results in fast, accurate, but smooth reaction. You can see a video of some comparisons between methods after the break.

Continue reading “Segway And Input Filtering” →

Bristle Bot Controversy

February 19, 2009 by 66 Comments

bristle

When the Bristlebots were released back in 2007 by Evil Mad Scientist Laboratories, we all thought they were pretty cool. Apparently someone at Klutz did too. They have released a book, with the title “Invasion of the BristleBots”. The bots seem to be identical and the name is identical. There is no mention of Evil Mad Scientist Laboratories anywhere in it. [Phillip Torrone] has attempted to contact Klutz and the book publisher Scholastic directly to find out more information.

[Windell] and [Lenore] from EMSL had this to say:

“This is the first that I’ve heard of it. Frankly, I am a bit offended. Klutz makes some nice things, and I’m surprised that they wouldn’t have contacted us, asked permission, or at least given us credit. (Locomotion by ratcheting bristles isn’t remotely new — it occurs in nature — but the name ‘Bristlebot’ is surely ours, and I don’t know of any prior implementation with a toothbrush.)”

You probably know EMSL from their other projects such as the Peggy and Meggy jr. How would you feel if a project you did was published without credit? Would you care or not?

Vacuum Former Toy

February 18, 2009 by 24 Comments

vacuum

Vacuum formers are still fairly rare in our community, so it was a surprise to see that in the 1960s Mattel marketed one as a toy. It used a hot plate to mold plastic sheets into various shapes. The design was updated by Toymax in the early ’90s to use a light bulb heating element to make car bodies, like some sort of manly Easy-Bake Oven. The home-built machines we’ve seen are a much larger scale. In 2005, we posted [Ralis Kahn]’s version that employed an electric grill as the heating element. [drcrash] has since built on those plans, hoping to develop an even cheaper device.

[via Gizmodo]

Temperature Sensing Munny

February 18, 2009 by 7 Comments

munny

Here’s another nerdy present that was built for Valentine’s Day. [João Silva] created a temperature sensing Munny. A Munny is a vinyl toy made to be customized. Other than these Munny speakers, we haven’t seen them in many electronics projects. The LM35CZ temperature sensor has an analog output that connects to the ADC on the ATtiny15L. The microcontroller changes the RGB LED’s color based on the temperature: blue for cold, green for comfortable, and red for hot. It only flashes every three minutes to conserve the power in the coin cells. His one-off circuit board also includes an ISP header for programming. The Munny’s head looks like it does a great job diffusing the light.