Early Bird Tickets For Hackaday Belgrade

February 12, 2018 by Mike Szczys 11 Comments

Early Bird tickets for Hackaday Belgrade have just gone on sale, but they will not last long. This is Hackaday’s premier European hardware conference with talks, workshops, great food and drink, entertainment, and a hardware badge for hacking and demos. Festivities will go all day on 26 May and carry long into the night. The last time we did this was two years ago and it was completely sold out — now’s the time to get in on the fun.

Who’s speaking, what are the workshops all about, what does the hardware badge do, and what music do you have lined up? Trust your gut — we’ll have more details soon enough but you know this conference will be epic and it’s worth your time and treasure to be there. To reward your enthusiasm, Early Bird tickets are a much better deal than general admission.

Our Call for Proposals is now open. We seek talks and workshops exploring the most interesting uses of technology and the culture that goes along with it.

The Circle of Friends You May Not Have Met

You know those people just outside of the Hackaday orbit who are tired of hearing about the stuff you build and the coding tricks you discover? Those people won’t be there. Everywhere you turn at Hackaday Belgrade, fascinating conversations await. You’ll want it to last a week but it’s just one day… plus a little more.

Plan to arrive in Belgrade on Friday. There will be an unofficial meetup at a bar (last time we took over most of the place). The weather in Springtime is amazing and having pivo on the porch until far too late in the evening was a blast.

Hackaday Belgrade Badge prototype. Voja Antonic, creator of the Galaksija computer — now in museums around the world — just Tweeted this teaser image of the conference badge design.

Things get started, not too early, on Saturday around 10 AM, and we’ll have coffee and treats to kick off the day. The baristas in 2016 were incredible, and the food — lunch and dinner — were as well. These amenities ring the socializing area of the conference in the lobby of the main hall. Talks and workshops will go all day but at 7 PM it’s all about hacking while our crew lay down a live IDM set. At 11 PM the badge hacking demos begin and the live DJ steps up at midnight.

See the Sights

Don’t let things end there. I vaguely remember a 3 or 4 AM ćevapi run after the last Hackaday Belgrade conference, and there were multiple groups planning museum trips the next day. Belgrade has a wonderful Museum of Science and Technology (I made it to that one), a Nikola Tesla Museum (I’m planning to get there this time), and a multitude of interesting attractions. I’ll save you from having to see my gallery of food photos, but the city is fun, inexpensive, and has really delicious cuisine.

This is a weekend you’ll remember forever. Make your plans now!

Hackaday Belgrade 2018 Posters (click for full size download link):

You Can Learn A Lot From A Blinkenrocket

February 2, 2018 by Elliot Williams 8 Comments

At this year’s Chaos Communication Congress, we caught up with [muzy] and [overflo], who were there with a badge and soldering project they designed to teach young folks how to solder and program. Blinkenrocket is a basically a 64-LED matrix display and just enough support hardware to store and display animations, and judging by the number of blinking rockets we saw around the necks of attendees, it was a success.

Their talk at 34C3 mostly concerns the production details, design refinements, and the pitfalls of producing thousands of a thing. If you’re thinking of building a hardware kit or badge on this scale, you should really check it out and crib some of their production optimization tricks.

For instance, instead of labelling the parts “C2” or “R: 220 Ohms”, they used a simple color-coding scheme. This not only makes it easier for kids to assemble, but it also means that they didn’t have to stick 1,000 part labels on every component. Coupled with [overflo]’s Zerhacker, SMD parts in strips were cut to the right length and color-coded in one step, done by machine.

The coolest feature of the Blinkenrocket itself is the audio programming interface. It’s like in the bad old days of software stored on cassette tapes, but it’s a phenomenal interface for getting a simple animation out of a web app and straight into a piece of minimal hardware — just plug it into a laptop or cell phone’s audio out and press “play” in the browser. The original design tried to encode the data in the pulse-length of square waves, but this turned out to be very hardware dependent. The final design used frequency-shift keying. What’s old is new again.

Everything you could want to know about the design, its code, and even the website itself are up on the project’s GitHub page, so go check it out. If you’d like to arrange a Blinkenrocket workshop yourself, shoot [muzy] or [overflo] an e-mail. Full disclosure: [overflo] gave us a kit, the “hard-mode” SMD one with ~~0805~~ 1206 parts, and it was fun to assemble and program.

Before…

After

Next Week: Vintage Computer Festival Pacific Northwest

February 2, 2018 by Brian Benchoff 10 Comments

Next week something magical is happening. Seattle is getting a Vintage Computer Festival. It’s the Vintage Computer Festival Pacific Northwest, and it’s happening Saturday, February 10th and Sunday, February 11th at the Living Computers Museum and Labs.

As with all Vintage Computer Festivals, this is one with plenty of exhibits, speakers, and the ever-popular consignment shop. A few of the more interesting exhibits include a demonstration of the Syntauri alphaSyntauri, a synthesizer card and controller designed for the Apple II. When it was released in 1980, this was the first affordable digital synthesizer that competed against the Synclavier and Fairlight CMI. The difference? Synclaviers cost as much as a house, where the alphaSyntauri cost as much as a car. Also on deck is the dis-integrated MOnSter6502, a complete NMOS 6502 constructed out of individual, surface mount transistors. The Digi-Comp II from Evil Mad Scientist will be there, there will be BlinkenBones, and for anyone who wants to assemble their own front panel for a vintage minicomputer, [Oscar Vermeulen] will be there with the Pi-DP/8. This isn’t an event to miss.

As an aside, we’d really like to commend the Vintage Computer Federation for their incredible work in putting these shows together. The VCF West at the Computer History Museum in Mountain View is an incredible show, VCF Southeast has some amazing displays, and VCF East in New Jersey is a pretty incredible gathering going down May 18th through the 20th this year. The people working behind the scenes to make these shows happen are doing a service for all vintage computers and performing digital archeology that benefits us all.

Hackaday is proud to be a sponsor of VCF Pacific Northwest.

Making The Case For Open Source Medical Devices

January 30, 2018 by Mike Szczys 53 Comments

Engineering for medical, automotive, and aerospace is highly regulated. It’s not difficult to see why: lives are often at stake when devices in these fields fail. The cost of certifying and working within established regulations is not insignificant and this is likely the main reason we don’t see a lot of work on Open Hardware in these areas.

Ashwin K. Whitchurch wants to change this and see the introduction of simple but important Open Source medical devices for those who will benefit the most from them. His talk at the Hackaday Superconference explores the possible benefits of Open Medical devices and the challenges that need to be solved for success.

Continue reading “Making The Case For Open Source Medical Devices” →

The Coolest Electronic Toys You’ll See At NAMM

January 26, 2018 by Brian Benchoff 49 Comments

Winter NAMM is the world’s largest trade show for musical instrument makers. It is a gear head’s paradise, filled to the brim with guitars, synths, amps, MIDI controllers, an impossibly loud section filled with drums, ukuleles, and all sorts of electronic noisemakers that generate bleeps and bloops. Think of it as CES, only with products people want to buy. We’re reporting no one has yet stuffed Alexa into a guitar pedal, by the way.

As with all trade shows, the newest gear is out, and it’s full of tech that will make your head spin. NAMM is the expression of an entire industry, and with that comes technical innovation. What was the coolest, newest stuff at NAMM? And what can hackers learn from big industry? There’s some cool stuff here, and a surprising amount we can use.

Continue reading “The Coolest Electronic Toys You’ll See At NAMM” →

Shmoocon: Advanced Low Power Techniques And A Watch

January 25, 2018 by Brian Benchoff 15 Comments

Real quick question: how do you increase productivity at work? The greatest (highest paid) minds would just say: do agile or scrum or something. What’s scrum? That’s where you gather ’round every morning for a waste of time meeting that kills your every desire to be productive. A while back, [Travis Goodspeed] was stuck in some lesser circle of hell like this and in an effort to be polite by not looking at his phone too much, looked at his watch too much. This led to the creation of the Goodwatch, a new bit of hardware that replaces the guts of a Casio calculator watch with a hex editor, ISM-band radio, MSP430 disassembler, and of course an RPN calculator.

[Travis] has already introduced the GoodWatch to the world. We took a look back in December but haven’t heard anything since. His talk at Shmoocon 2018 put a little more light on how this project came to be.

Continue reading “Shmoocon: Advanced Low Power Techniques And A Watch” →

Shmoocon: Delightful Doppler Direction Finding With Software Defined Radio

January 23, 2018 by Brian Benchoff 37 Comments

When it comes to finding what direction a radio signal is coming from, the best and cheapest way to accomplish the task is usually a Yagi and getting dizzy. There are other methods, and at Shmoocon this last weekend, [Michael Ossmann] and [Schuyler St. Leger] demonstrated pseudo-doppler direction finding using cheap, off-the-shelf software defined radio hardware.

The hardware for this build is, of course, the HackRF, but this pseudo-doppler requires antenna switching. That means length-matched antennas, and switching antennas without interrupts or other CPU delays. This required an add-on board for the HackRF dubbed the Opera Cake. This board is effectively an eight-input antenna switcher using the state configurable timer found in the LPC43xx found on the HackRF.

The key technique for pseudo-doppler is basically switching between an array of antennas mounted in a circle. By switching through these antennas very, very quickly — on the order of hundreds of thousands of times per second — you can measure the Doppler shift of a transmitter.

However, teasing out a distinct signal from a bunch of antennas virtually whizzing about isn’t exactly easy. If you look at what the HackRF an Opera Cake receive on a waterfall display, you’ll find a big peak around where you expect, and copies of that signal trailing off, separated by whatever your antenna switching frequency is. This was initially a problem for [Schuyler] and [Ossmann]’s experiments. Spinning the antennas at 20 kHz meant there was only 20 kHz difference in these copies, resulting in a mess that can’t be decoded. The solution was to virtually spin these antennas much faster, resulting in more separation, and a clean signal.

There are significant challenges when it comes to finding the direction of modern radio targets. Internet of Things things sometimes have very short packet duration, modulation interferes with antenna rotation, and packet detection must maintain the phase. That said, is this technique actually able to find the direction of IoT garbage devices? Yes, the demo on stage was simply finding the direction of one of the wireless microphones for the talk. It mostly worked, but the guys have some ideas for the future that would make this technique work a little better. They’re going to try phase demodulation instead of only frequency-based demodulation. They’re also going to try asymmetric antenna arrays and pseudorandom antenna switching. With any luck, this is going to become an easy and cheap way to do pseudo-doppler direction finding, all enabled by a few dollars in hardware and a laser-cut jig to hold a few antennas.