A small mood/busy indicator attached to a laptop.

Personal Traffic Light Stops Them In Their Tracks

December 14, 2024 by Kristina Panos 30 Comments

Working from home can be pretty cool, but if you’re not the only one in the house trying to do it, the whole situation can feel like you’re right back in the office with all those walking, talking distractions. Except they’re in pajamas instead of business casual.

So, what’s the answer? Many times it’s not practical to stop what you’re doing, especially just to communicate that you’re busy. We suppose you could glare at them, put up your hand, or even give a dismissive wave, but a better solution might be this mood signal built by [gokux].

Through a simple web app, you can be red to indicate that you’re super busy, yellow to mean busy-ish, and green for let’s gossip about the cats.

This mood indicator is built on the Seeed Xiao ESP32-C3 and shows the given mood indicator on a small matrix of sixteen WS2812B LEDs. It’s powered by a 600 mAh, 3.7 V battery and a small push button switch. As usual, [gokux] has grade-A instructions for building your own version of this slick solution.

Would you like something more tactile and low-tech? Check out our own [Bob Baddeley]’s free/busy indicator from the lockdown days.

Fully Submerge This Modernized PH Sensor

November 29, 2024 by Bryan Cockfield 18 Comments

There’s a school of thought that says you shouldn’t mess around with a solution that’s already working, but that’s never seemed to stop anyone in this community. When [Skye] was looking at the current state of connected pH meters they realized there was incredible room for improvement.

Called the Nectar Monitor, this pH meter is a more modern take on what is currently offered in this space. Open source and based on the ESP32, it’s accessible to most people with a soldering iron, fits into a standard project box, and includes other modern features like USB and WiFi connectivity. It can even measure conductivity and temperature. But the main improvement here is that unlike other monitors that can only be submerged temporarily, this one is designed to be under water for long time periods thanks to a specially designed probe and electrical isolation.

This design makes it an appealing choice for people with aquariums, hydroponic farms, or any other situation where constant monitoring of pH is extremely important to maintaining a balanced system. We’ve seen some unique takes on hydroponics before especially, including this build that moves the plants instead of the nutrient solution and this fully automated indoor garden.

Open Source Universal ROM Programmer Grows Up

November 16, 2024 by Al Williams 18 Comments

When we first looked at [Anders Nielsen’s] EEPROM programmer project, it was nice but needed some software and manual intervention and had some limitations on the parts you could program. But through the magic of Open-Source collaboration, revision 2 of the project overcomes all of these limitations and—as you can see in the video below—looks very polished.

If you recall, the programmer is in a “shield” format that can plug into an Arduino or — if you prefer a retrocomputer — a 6502uno. Along with hardware improvements from the community, [Henrik Olsson] wrote Python software to handle the programming (see the second video below).

Continue reading “Open Source Universal ROM Programmer Grows Up” →

WiFi Status Indicator Keeps Eye On The Network

November 16, 2024 by Tom Nardi 19 Comments

These days, most of us take the instant availability of a high-speed link to the Internet for granted. But despite all of the latest technology, things still occasionally go pear-shaped — meaning that blistering fiber optic connection you’ve got to the world’s collected knowledge (not to mention, memes) can still go down when you need it the most.

After suffering some connectivity issues, [Arnov Sharma] decided to put together a little box that could alert everyone in visual range to the status of the local router. It won’t fix the problem, of course, but there’s a certain value to getting timely status updates. Using a 3D printed enclosure and a couple of custom PCBs, the build is fairly comprehensive, and could certainly be pressed into more advanced usage if given the appropriate firmware. If you’ve been thinking of a Internet-connected status indicator, this is certainly a project worth ~~copying~~ studying closely.

Continue reading “WiFi Status Indicator Keeps Eye On The Network” →

RISC-V Pushes 400 Million Forth Words Per Second

November 15, 2024 by Al Williams 28 Comments

We’ll be honest. Measuring Forth words per second doesn’t seem like a great benchmark since a Forth word could be very simple or quite complex. But we think the real meaning is “up to 400 million words per second.” There was a time when that level of performance would take a huge computer. These days, a simple board that costs a few bucks can do the trick, according to [Peter Forth] in an online presentation.

The key is the use of the Milk V Duo and some similar boards. Some of these look similar to a Raspberry Pi Pico. However, this chip on board has two RISC V cores, an ARM core, and an 8051. There’s also an accelerator coprocessor for vector operations like AI or video applications.

Continue reading “RISC-V Pushes 400 Million Forth Words Per Second” →

Cheap Sensor Changes Personality

November 10, 2024 by Al Williams 27 Comments

If you want to add humidity and temperature sensors to your home automation sensor, you can — like [Maker’s Fun Duck] did — buy some generic ones for about a buck. For a dollar, you get a little square LCD with sensors and a button. You even get the battery. Can you reprogram the firmware to bend it to your will? As [Duck] shows in the video below, you can.

The device advertises some custom BLE services, but [Duck] didn’t want to use the vendor’s phone app, so he cracked the case open. Inside was a microcontroller with Bluetooth, an LCD driver, a sensor IC, and very little else.

Continue reading “Cheap Sensor Changes Personality” →

DIY Digital Caliper Measures Up

November 8, 2024 by Al Williams 15 Comments

You might wonder why [Kevin] wanted to build digital calipers when you can buy them for very little these days. But, then again, you are reading Hackaday, so we probably don’t need to explain it.

The motivation, in this case, was to learn to build the same mechanism the commercial ones use for use in precise positioning systems. We were especially happy to see that [Kevin’s] exploration took him to a Hackaday.io project which led to collaboration between him and [Mitko].

Continue reading “DIY Digital Caliper Measures Up” →