camera

579 Articles

Gimbal Camera Stabilizer

July 15, 2009 by 38 Comments

steadycam

Professional cameramen use steadicams to make their shots look smooth and clean. However, their prices are generally way too high for an indie’s budget. Previous attempts have tried adding a counterweight and moving the camera away from the hands. [YB2Normal] took a different method and used a bob and gimbal to hold the camera upright. The gimbal is free to rotate along 3 axes, so the camera can stay in place. The whole thing cost less than $15. The first video he made with he mount is after the break.

[youtube http://www.youtube.com/watch?v=nXB0ncUQLn4%5D

Related: Building a Snorricam

[via Gizmodo]

Balloon Based Satellite

July 10, 2009 by 14 Comments

balloonsat

This project provides an opportunity to conduct near space experiments. The flight computer, BalloonSat Extreme, is controlled by a BASIC Stamp 2pe. The complete BOM with PCB artwork is provided. There is enough hardware to control cameras, servos, a Gps, and five digital I/O. The computer is also equipped with a 12 bit ADC to log experiment results. The device seems limited to 30KB of storage. Though the author suggests this memory limitation is more than adequate, we are wondering if an implementation of the Nyquist sampling theorem is in use at all. For further reading the author has provided information regarding Amateur Radio High Altitude Ballooning.

[via adafruit]

Poor Man’s Thermographic Camera

July 1, 2009 by 24 Comments

thermographic camera

Using an IR thermometer, there are two ways to go about building a thermographic camera. The first uses a pan and tilt head. Scan lines are emulated, as a computer controls panning from left to right, taking a temperature sample from each step. Vertical resolution is accomplished by tilting. Another method uses a web cam attached to the thermometer. The thermometer’s laser pointer is captured with temperature annotations, as the computer records the field of view. We think the best outcome can be found with a combination of both methods. The video embedded below demonstrates the results. This would be a good addition to the Autonomous paintball sentry.

Continue reading “Poor Man’s Thermographic Camera” →

Wide Angle Lense Mod For The ATC2K

June 25, 2009 by 6 Comments

wal

For those that have them, the ATC2K action camera is a decent little piece of equipment. It is waterproof and can save video for roughly 30 minutes on a flash card. The viewing angle of the lens leaves something to be desired though. This has been remedied in newer models. [raalst] shows us how to modify the ATC2K to install a new, wider angle lens, while retaining the waterproof seal.  He also takes us through a necessary mod to ensure clear video under water since the new lens was not initially intended for it.  Just in case you are curious, he’s using his for hobby radio controlled submarine dives.

Things To Hack: Sub 100$ Toy Night Vision, Projector, And Tv Game

June 22, 2009 by 14 Comments

projector

Ars Technica writes about three new toys coming out this year: a sub 100$ projector, tv game, and night vision goggles. The projector runs at standard TV resolution, takes standard composite in, and outputs an okay picture. The night vision goggles are monocular but focus both eyes on a single RGB LCD. The goggles uses an array of IR LEDs instead of amplifying ambient light to see in the dark. Lastly, they have a standalone implementation of the arcade game Big Game Hunters. The rifle uses a sensor bar to do the motion tracking and features a 32MB rom to hold the game files.

Arduino Camera Laser Trigger

June 19, 2009 by 7 Comments

pict0005

[Adam] made a remote camera trigger that uses a laser. He had to install CHDK on his camera, which we’ve featured in a how-to, in order for it to work. CHDK allowed for a remote shutter trigger through the USB port. The laser bounces off a mirror and onto the photoresisitor hooked up to an Arduino. When the beam is broken, the Arduino sets off the trigger. He also plans to use the trigger to tweet over ethernet. Embedded is a video demonstrating its functionality.

Continue reading “Arduino Camera Laser Trigger” →

IPhone 3G S Teardown

June 19, 2009 by 9 Comments

iphone

Already, both Rapid repair and ifixit have torn down the new iPhone 3G S, and phonewreck has provided some analysis. The new CPU runs twice as fast at 600 MHz and supports 720p video. They also found that the new 3 megapixel camera took better photos. Surprisingly, despite apple’s claims that the new phone has significantly better battery life, the battery itself has only 6% more capacity. Overall, not much has changed.

[Related iPhone 3G under the hood]