SuperSlicer Reviewed: Another 3DP Slicer?

October 26, 2021 by Al Williams 32 Comments

When you think of slicers for FDM 3D printing — especially free slicers — you probably think of Cura, Slic3r, or PrusaSlicer. There are fans of MatterControl and many people pay for Simplify3D. However, there are quite a few other slicers out there including the one [TeachingTech] has switched to: SuperSlicer. You can see his video review, below.

Of course, just as PrusaSlicer is a fork of Slic3r, SuperSlicer is a fork of the Prusa software. According to the project’s home page, the slicer does everything Prusa does but adds custom calibration tests, ironing, better thin wall support, and several other features related to infill and top surfaces. The software runs on Windows, Linux, or Mac.

Continue reading “SuperSlicer Reviewed: Another 3DP Slicer?” →

How Much Is That Shirt In The (Atmospheric) Window?

October 26, 2021 by Kristina Panos 41 Comments

Summer is fading into a memory now, but as surely as the earth orbits the sun, those hot and sweaty days will return soon enough. And what can you do about it at the level of a single, suffering human being? After all, a person can only remove so much clothing to help cool off. Until someone figures out a way to make those stillsuits from Dune, we need an interim solution in which to drape ourselves.

We’ve seen the whitest paint possible for cooling buildings, and then we saw a newer, whiter and more award-winning paint a few months later. This paint works by the principle of passive cooling. Because of its color and composition, it reflects most light and absorbs some heat, which gets radiated away into the mid-infrared spectrum. It does this by slipping out Earth’s atmospheric window and into space. Now, a team based in China have applied the passive cooling principle to fabric. Continue reading “How Much Is That Shirt In The (Atmospheric) Window?” →

IoT flower pot monitors moisture and temperature levels.

Smart Flower Pot Build Is All About That Base

October 26, 2021 by Kristina Panos 10 Comments

For some reason, it seems like most of the plant monitoring setups we see separate the plant and the monitoring system. This makes sense in a don’t-own-a-waterbed-and-a-cat kind of way, but it also doesn’t from an aestheitc standpoint. This build by [Jorge Enrique Gamboa Fuentes] sure does look nice and tidy as an all-in-one unit, and fortunately is built with obvious issues in mind. It tracks water level, soil moisture, and soil temperature with a single device — a STEMMA-connected soil sensor that does all the monitoring work.

This attractive beginner build is a Python-powered project that runs on a PyPortal Titano and has a speaker that anthropomorphizes the thing so it can ~~berate you~~ politely ask for water in English. But the real magic of this build is in the enclosure itself. Thankfully, it’s designed with a drip tray, but it also keeps the electronics out of the water, allowing just the tip of the sensor to get wet. You can view the vital signs directly on the device, or on a web dashboard whenever you’re away.

In the future, [Jorge] wants to experiment with GCP and Azure, connect more flower pots together, and add more sensors so that it is more autonomous. One of the major lessons learned was that you probably shouldn’t start with a succulent, because they need very little water and this will drag out your development time considerably unless you over-water it, which will kill it. Check it out after the break.

If [Jorge] wanted to go the easy route, they might stick this plant under an old Keurig that’s been converted to an automatic watering device.

Continue reading “Smart Flower Pot Build Is All About That Base” →

Being Green, It’s A Rich Man’s Game

October 26, 2021 by Jenny List 245 Comments

It’s an old saying with an apocryphal origin: “May you live in interesting times“. We Brits are certainly living in interesting times at the moment, as a perfect storm of the pandemic, rising energy prices, global supply chain issues, and arguably the post-Brexit departure of EU-national truck drivers has given us shortages of everything from fresh vegetables in the supermarket to carbon dioxide for the food industry. Of particular concern is a shortage of automotive fuels at the filling station, and amid sometimes-aggressive queues for the pumps it’s reported that there’s a record uptick in Brits searching online for information about electric cars.

Nothing Like A Crisis To Make You Green

My VW Polo loaded for EMF 2018 — How I miss my little car, here loaded for EMF 2018.

This sudden interest in lower-carbon motoring may be driven by the queues rather than a concern for the planet, but it’s certainly true that as a culture we should be making this move if we are to have a hope of reducing our CO2 production and meeting our climate goals. A whole slew of lifestyle changes will have to be made over the coming years of which our car choices are only a part. Back to those beleaguered Brits again, a series of environmental protests have caused major disruption on the motorway network round London, not protesting against the traffic but campaigning for better home insulation.

For reasons of personal circumstance rather than principle, earlier this year I gave my trusty VW Polo to an old-Volks-nut friend and now rely on a bicycle. Living where I do within reach of everything I need it hasn’t been as challenging as I expected it to be, and aside from saving a bit of cash I know my general fitness level has gone up. Though I have less need for a car now than I used to, I intend to find myself another vehicle in due course so that I can do silly things such as throwing a Hackaday village in the back and driving halfway across Europe to a hacker camp. With an awareness that whatever I choose should be as good for the planet as I can make it then, I’ve been cruising the used-car websites to see what I can find.

Continue reading “Being Green, It’s A Rich Man’s Game” →

This Really Really Is Your Last Chance To Enter The 2021 Hackaday Prize (Really!)

October 26, 2021 by Mike Szczys 2 Comments

Oh, walnuts! How can we already be at the end of the last round? 2021 has been a time warp and now we are staring down the final day to enter the Reactivate Wildcard challenge of the Hackaday Prize. You must enter by 7 AM Pacific time on Wednesday or it’s too late!

Of course the good news is that the topic is wide-open. Wildcard is for all the things that didn’t fit in the first four entry challenges. If it’s a good idea, if it’s a build that really matters, it should be entered!

The ten winning projects from this round will each get $500 cash prizes, and be shuttled on to the final round. All 50 finalists will have until November 7th to hone their offerings, at which point our slate of expert judges will pick the most interesting and impactful for the $25,000 grand prize and four other top prizes.

And how, you ask, will you find out who won? The Hackaday Prize Ceremony will be held online on November 20th during the Hackaday Remoticion. So your assignment today is to warm up that keyboard, mouse, and smartphone camera to get your project entered right away! Step two is to grab your ticket to Remoticon for a weekend of wonderful talks, great people, and an inspiring lineup of hardware builds that made this year’s Hackaday Prize truly shine.

Wondering what kind of stuff makes a great Wildcard entry? Majenta Strongheart has you covered in her latest video roundup below.

Continue reading “This Really Really Is Your Last Chance To Enter The 2021 Hackaday Prize (Really!)” →

Spider-Man Swings A Little Closer To Reality

October 26, 2021 by Matthew Carlson 5 Comments

Despite reading Hackaday daily and seeing the incredible things that people do, something comes along that just sort of blows you away every once in a while. Sometimes it’s just technically impressive, but often it is just, “I didn’t think that anyone would try this or even think of this.” [Joel Creates] is one such example with his Spider-Man wrist-mounted web-shooters.

Previously, [Joel] had built a web-slinging system based around a pressurized tank of hot glue worn like a backpack. What it lacked in miniaturization, it made up for in functionality. However, [JT of Build IRL] created a grappling-based Spider-Man system that fired ropes which got [Joel] thinking that perhaps the hot glue and the grappling system could be combined for a smaller overall package.

His solution is quite simple. Old CO2 cartridges filled with glue and a small nozzle drilled in are loaded into a quick-connect fitting. The hot glue is heated via an induction coil on a small tool belt before loading. A thermally insulating layer of paint and micro-vacuum spheres on the canister helps [Joel] place it in the wrist shooter without burning himself. A bike tire inflator with a lever-activated system forms the main assembly of the shooter. Using compressed air, the system fires a glob of hot glue at a surface and a metal web-shaped disk with holes and a rope attached to the blob of hot glue. As the glue rapidly cools, the metal disk provides a lot of surfaces for the adhesive to hang onto. Overall, the results are pretty impressive, but the engineering challenges make for an exciting journey. Everything from failed prototypes to failed power supplies seems to happen on this build.

Combined with some electromagnets, you could really have the whole spider package.

Thanks [Carson B] for sending this one in! Video after the break.

Continue reading “Spider-Man Swings A Little Closer To Reality” →

Classic 80s Text-To-Speech On Classic 80s Hardware

October 26, 2021 by Bryan Cockfield 34 Comments

Those of us who were around in the late 70s and into the 80s might remember the Speak & Spell, a children’s toy with a remarkable text-to-speech synthesizer. While it sounds dated by today’s standards, it was revolutionary for the time and was riding a wave of text-to-speech functionality that was starting to arrive to various computers of the era. While a lot of them used dedicated hardware to perform the speech synthesis, some computers were powerful enough to do this in software, but others were not quite able. The VIC-20 was one of the latter, but thanks to an ESP8266 it has been retroactively given this function.

This project comes to us from [Jan Derogee], a connoisseur of this retrocomputer, and builds on the work by [Earle F. Philhower] who ported the retro speech synthesis software known as SAM from assembly to C which made it possible to run on the ESP8266. Audio playback is handled on the I2S port, but some work needed to be done to get this to work smoothly since this port also handles the communication with the VIC-20. Once this was sorted out, a patch was made to be able to hear the computer’s audio as well as the speech synthesizer’s. Finally, a serial command interface was designed by [Jan] which allows for control of the module.

While not many of us have VIC-20s sitting at home, it’s still an interesting project that shows the broad scope of a small and inexpensive chip like the ESP8266 which would have had a hefty price tag back in the 1980s. If you have other 80s hardware laying around waiting to be put to work, though, take a look at this project which brings new vocabulary words to that old classic Speak & Spell.

Continue reading “Classic 80s Text-To-Speech On Classic 80s Hardware” →