ESP32 WIFI Jam Detector Finds The Raspberry

We’ve seen plenty of ESP32 WiFi projects that test wifi systems with attacks such as Deauth, and even jamming. Today’s project is a bit different. [TheDigital1] created an ESP32 project that uses SDR to detect interference in the WiFi bands.  The detector builds on the popular ESPARGOS ESP-SDR project that we have previously featured, to scan for any interference. The hardware is based on an ESP32-C5, so it covers both the 2.4GHz and 5GHz bands. [TheDigital1] used a Waveshare ESP32-C5-Touch-LCD-3.5, but since the project is open source, you should be able to port it to other devices.

The system doesn’t just detect noise. It can categorize the interference into four types: wideband, narrowband, pulsed wideband, and frequency-swept. [TheDigital1] notes that while the system can detect interference, it can’t detect intent, so it’s up to the user to determine if they have a leaky microwave or hackers trying to shut down their WiFi.

The system works great as a portable standalone device. In fact, the interface is pretty slick. Connecting it to a PC via USB opens up even more features. It can be used with Home Assistant as a WiFi Jammer detector. It can even detect if a room is occupied by sensing the noise floor increase from humans moving around.

With all these new ESP32 SDR projects coming up, we can’t wait to see what’s next!

Follow The Grid With An Arduino Uno

We all know the frequency of our AC grid. 60Hz for Americans, or 50Hz for Europeans, for example.  But the real story has some complexity. In a plural but interconnected grid such as Europe’s, that frequency can drift around a nominal center value. To keep track of this, [Jeroen Brinkman] has created a grid monitor that can show long-term trends as well as instantaneous frequencies.

Hardware-wise, it’s somewhat old-school, with an Arduino Uno and a ubiquitous 2×16 character LCD, but the interest here lies not in the microcontroller. Sensing mains frequency is fraught with spicy high-voltage danger if done directly, so [Jeroen] is performing the task using an optocoupler that toggles an interrupt pin on the Arduino. The monitor stores long-term data by the week, using only four bytes per week. That means the monitor can hold up to 240 weeks, or about 4.6 years, on a Nano R3 and over 2,000 weeks, or around 39 years on a Nano R4. The data can be retrieved via serial transfer over the Arduino’s USB port.

The subject of grid monitoring is a fascinating one, as geopolitical events can show up in it. Back in 2018, we covered the moment when Europe lost six seconds as a result.

It’s A NAS, For Sony Mavica Disks

At the dawn of the consumer digital camera age, manufacturers tested this new market with a wide array of interesting and unorthodox designs. This era only lasted a few years before they moved toward making models that resembled the 35mm cameras the consumers were used to. Sony’s Mavica offerings were particularly unusual, because they eschewed Flash storage for the then-ubiquitous 3.5″ floppy disk. Where there are files, there might be a need to share them, so [Bigcrimping] has created floppy3.5. It’s a NAS for digital Mavica disks.

Continue reading “It’s A NAS, For Sony Mavica Disks” →

VapourDeck Is The 486 Handheld You Didn’t Know You Needed

Do you need a 486-based handheld computer for DOS games? Well, we didn’t think so either — until we saw [Sprite_tm]’s impressive and excellently documented VapourDeck homebrew handheld PC. Now we want one for Christmas and to be [Sprite_tm] when we grow up.

There exist industrial single-board computers designed around the Intel 486, and you’d be forgiven for thinking that’s what lives inside this build– but no. [Sprite_tm] was tired of thinking of a motherboard as “deep magic” and decided it was high time he designed his own. He chose the 486 because Intel actually let mere mortals at the documentation in those days, and it would let him play all his favourite DOS games on the fly. The board contains a period-appropriate VGA chip — complete with whopping 1MB of VRAM!– though most of the glue logic, I/Om and sound are on a modern FPGA and ESP32-S3, respectively. An image of the custom 486 SBC with the main components labelled

The writeup gives a good idea of the thinking behind this machine, but if you want to build one yourself, you can get all the files on Codeburg, because [Sprite_tm] was kind enough to open-source his work even if he’s not sure anyone else would want to replicate it.

We’ve seen a lot of [Sprite_tm]’s work on Hackaday over the years, including a portable Vectrex he walked us through at Supercon one year.

Thanks to [Vital] for the tip!

Hackaday Links Column Banner

Hackaday Links: November 15, 2026

Another Hackaday Supercon is in the history books. The new venue was amazing. We had more attendees than ever and still had room to spare. You can find many of the talks, including the lightning talks, in the live section of our YouTube channel. You can even watch the final badge hacking competition.

Continue reading “Hackaday Links: November 15, 2026” →

Loop Antennas For Transmitting

Loop antennas are becoming increasingly popular as more radio fans find they can’t erect elaborate outdoor antennas. Like most things, of course, there are trade-offs. But, most often, loop antennas are for receiving. Only a few can handle transmitting, and [FesZ] wanted to build some that could handle transmit power. You can find out what he discovered in the video below.

Loop antennas are very sensitive, and a standard variable capacitor just rotates less than a single rotation. High-precision devices would often have gear reductions, but those are hard to find today. But with a 3D printer, it is reasonably easy to make gear reductions for a variable capacitor, and that’s what [FesZ] did.

Continue reading “Loop Antennas For Transmitting” →

An Orbital Sanders Crash Course And The Threat Of HAVS

This is your hand on bad vibrations. (Credit: Five Duck Studio, YouTube)
This is your hand on bad vibrations. (Credit: Five Duck Studio, YouTube)

Most people know about orbital sanders, as the cousin of sheet sanders, with many people using them every day to make wood and other surfaces smooth. Yet if you have ever wondered at the slightly numb and tingling feeling in your hands after using them for a while, you really want to watch this deep dive by [Five Duck Studio] on how orbital sanders work and why not all vibrations are good vibrations.

First, the basic workings of an orbital sander are explained in the video, including the way that the orbital sanding pattern is created by the spinning disc. These patterns aren’t the same size for each sander, with the ‘finisher’ ~2.5 mm pattern being decidedly more suitable for fine work, while the roughly 5 mm pattern is better for coarser work.

From here, the details spiral into the various brake mechanisms, which prevent the disc from spinning wildly when not on a surface. This can be as simple as an O-ring providing some friction.

Continue reading “An Orbital Sanders Crash Course And The Threat Of HAVS” →