ChatGPT Rules The World… Or, At Least, The Home

May 22, 2023 by 17 Comments

With all the hype about ChatGPT, it has to have crossed your mind: how can I make it control devices? On the utopia side, you could say, “Hey, ChatGPT, figure out what hours I’m usually home and set the thermostat higher when I am away.” On the dysfunctional side, the AI could lock you in your home and torment you like some horror movie. We aren’t to either extreme yet, but [Chris] couldn’t resist writing a ChatGPT plugin to control a Raspberry Pi. You can see a video of how it turned out below.

According to [Chris], writing a ChatGPT plugin is actually much simpler than you think. You can see in the video the AI can intuit what lights to turn on and off based on your activity, and, of course, many more things are possible. It can even detect snoring.

Continue reading “ChatGPT Rules The World… Or, At Least, The Home” →

The Wizard Of Semiconductors

May 22, 2023 by 19 Comments

If you have three hours and you want to learn the fundamentals of semiconductors, [Tiny Tapeout] has something for you: An introduction to SiliWiz. You’ll also need the SiliWiz software (or use it online), which resembles the kind of tools that chip designers use but is meant for students to use as a learning tool

Using SiliWiz, you create layers on a virtual device, and you can use Spice to view the results. The tutorial is meant to be high-level and is suggested for students aged 14 or over (but we liked it and we are quite a bit older than that). Some more advanced material is also available at the same site.

Continue reading “The Wizard Of Semiconductors” →

We’ve Got A Saxaboom At Home Son

May 21, 2023 by 6 Comments

Most parents have heard a familiar story. Their lovely child comes up, having seen a celebrity rocking out with a funny $20 toy from the 80s, and asks for it. Of course, you reply, it’s just 20 dollars. However, a quick scan through eBay reveals that everyone else’s kid has also been asking for this obscure toy for a school event, which now costs around $700. [Ben] found himself in that exact position and made a crucial off-hand comment, “I bet I could make one of those.” That was how his hectic journey into the world of toy reproduction began.

All [Ben] had for reference when recreating a Sax-A-Boom were pictures and sound clips. Modeling complex sweeping shapes in CAD is difficult, and [Ben] commissioned a 3d model from a professional on Fiverr. [Ben] broke down the model into printable sections and tweaked it to account for buttons. After a concerning amount of putty, wet sanding, and elbow grease, [Ben] had a decently smooth body for an instrument. The device’s guts is an ESP32-based board called Sonatino, built around music generation. The music samples came from a virtual instrument clone on GitHub and loaded onto an SD card.

Time pressure crept in towards the end, and [Ben] had to go for some dirty solution that he would have preferred (popsicle sticks and epoxy for button mounting). Yes, there were some gaps and paint flaws, but ultimately [Ben’s] son rocked the school presentation. It’s a beautiful journey through creating something with a high level of finish on a limited timescale.

Perhaps future versions of the Sax-A-Boom can take it further by adding a breath sensor, like this 3d printed MIDI instrument.

Continue reading “We’ve Got A Saxaboom At Home Son” →

Watch A Web Page Fetch Itself Over TLS, Complete With Commentary

May 21, 2023 by 12 Comments

TLS, byte by byte performs an unusual and interesting function: it fetches itself over HTTPS, and provides a complete annotation of what’s going on in the process, one byte at a time. Visit the site and give the button a click to watch it happen, it’s neat!

Transport Layer Security (TLS) is what’s responsible for encrypting traffic over the internet, and it’s normally implemented on top of TCP to encrypt an application-layer protocol like HTTP (resulting in HTTPS and the little padlock icon in browsers indicating a connection with a web site is encrypted.) Back in the day, traffic over the internet was commonly unencrypted, but nowadays no communication or hardware is too humble for encryption and methods are easily accessible.

So for what purpose would someone actually need or use such an implementation of TLS? Well, probably no one actually needs it. But it is a userspace TLS implementation in javascript that may fit a niche for someone, and it certainly provides beautifully-indented and annotated binary data in the process. Sound up your alley? The GitHub repository for the project has all the details, so give it a look.

Hackaday Links Column Banner

Hackaday Links: May 21, 2023

May 21, 2023 by 14 Comments

The reports of the death of automotive AM radio may have been greatly exaggerated. Regular readers will recall us harping on the issue of automakers planning to exclude AM from the infotainment systems in their latest offerings, which doesn’t seem to make a lot of sense given the reach of AM radio and its importance in public emergencies. US lawmakers apparently agree with that position, having now introduced a bipartisan bill to require AM radios in cars. The “AM for Every Vehicle Act” will direct the National Highway Transportation Safety Administration to draw up regulations requiring every vehicle operating on US highways to be able to receive AM broadcasts without additional fees or subscriptions. That last bit is clever, since it prevents automakers from charging monthly fees as they do for heated seats and other niceties. It’s just a bill now, of course, and stands about as much chance of becoming law as anything else that makes sense does, so we’re not holding our breath on this one. But at least someone recognizes that AM radio still has a valid use case.

Continue reading “Hackaday Links: May 21, 2023” →

Pill Dispenser To Keep You On Track

May 21, 2023 by 11 Comments

When forgetting to take medication on time can lead to a bad day or night, having a helper to keep you on track can greatly improve your life. [M. Bindhammer] faces this scenario every day, so he built his own robotic pill dispenser.

The core of the project is a 3D printed dispensing drum with individual pockets for morning and evening medication. It is mounted directly to a 360° winch servo, normally used for RC sailboats, while a second conventional servo opens a small sliding door to drop the pills onto the dispensing tray. The tray integrates a sensitive touch sensor which can detect when [M] picks up the pills, without being triggered by the pills themselves.

[M. Bindhammer] also included a small but loud speaker, connected to a speech synthesis module for audio reminders. The main controller is a Arduino Due with a custom breakout shield that also integrates a DS3231 real time clock. All the electronics are enclosed in a 80’s style humanoid robot-shaped body, with dispensing drum on its chest, and an OLED screen as it’s face.

The end result is a very polished build, which should make [M. Bindhammer]’s life with bipolar disorder a little bit easier, and he hopes it might help others as well.

For more medication related gadgets, take a peek at another pill dispenser and a 3D printed dosing spoon to replace an essential but discontinued commercial version.

Robotic Coffee Comes To Brooklyn, But Will It Stay?

May 21, 2023 by 25 Comments

Robots are cool. Everyone knows it, and [Eater NY] highlights a coffee shop with a robotic server opening in Brooklyn. While robots able to prepare and serve drinks or food is not new, it isn’t every day a brick-and-mortar café with a robot behind the counter opens up. But expensive automation isn’t the only puzzle piece needed to make a location work.

A robotic coffee shop (like a robotic burger joint) certainly offers novelty, but can it sustain itself beyond that?

As one example, the linked article above points out that the city of New York prohibits entirely cashless businesses. Establishments must accept cash payments, and it’s unclear how the touchscreen-driven system would comply with that requirement.

There are also many tasks involved in running even a modest establishment — loading, cleaning, and maintaining for example — that can’t be realistically taken care of by an immobile robot barista. It’s unclear to what extent the robotic coffee shop will employ human staff, but it’s clear that human involvement is something that isn’t going be eliminated any time soon.

Some of you may remember the robotic burger joint that our own Brian Benchoff managed to check out, and many of his same observations come to mind. The robot burger was perhaps ahead of its time (its single location is listed as closed on Google maps with no recent activity) but maybe the robot coffee place can make it work. Still, expensive automation is only one piece of a system, and the ability to crank out a drink per minute 24/7 might not actually be the missing link.