Hackaday Prize 2022: Saving The World, One Brew At A Time

August 5, 2022 by Elliot Williams 10 Comments

OK, so maybe [satanistik] is overreaching with his project title “Save the Coffee, Save the World” but keeping an otherwise working coffee machine out of the landfill by hacking around its broken display is nonetheless a worthy pursuit. The juice must flow!

The busted display used a SSD1303 controller OLED module, for which the SSD1305Z is an almost-compatible module. Almost. The one glitch is that the screen is filled in the opposite direction by default. Digging through the manuals, there is a screen-direction bit to set, and tracing out the communication with a logic analyzer, it’s set the wrong way with every screen refresh. If only he could flip that one bit while it’s in transit. Time to man-in-the-middle!

While we certainly would have put a microcontroller in the game, [satanistik] goes old-school. A two-IC logic solution can do exactly the same thing, trading wires for code. The final iteration of the converter board is correspondingly spartan, but it does its one job.

So if you’ve got a Nivona coffee machine with a bum display, or perhaps an Agilent U1273A multimeter, or any other piece of equipment that needs a hard-to-find SSD1303 controller, now you have a ready-made solution. But if not, and you find yourself looking for a display that you can’t find, let this serve as an example to you – with a little (fun) effort, you can hack it back.

Buzzword Bingo Bitcoin Burial Burrowing Blueprint Balked At By Bureaucracy

August 4, 2022 by Jenny List 46 Comments

Many of you will at some time have heard the unfortunate tale of [James Howells], a Welsh IT worker who threw away a hard drive containing 8,000 Bitcoin back in 2013. Over the years he’s hatched various schemes to persuade his local council to let him dig up the landfill where it’s reputed to be buried, and every time he’s been rebuffed. Despite the fall in the price of cryptocurrencies he’s back with another. With the added spice of AI and robot dogs alongside the cryptocurrency angle, it reads like a buzzword bingo card and adds a whole new meaning to “Bitcoin mining”. Seemingly despite generous offers the local council are still not keen on letting him dig for the drive.

We can’t help feeling sorry for the guy — after all, in the early days of cryptocurrency the coins were a worthless curiosity so it’s not impossible there are readers with similar stories. But we’re curious how well the drive will have survived its 9-year interment even if the AI robot arm and robot dog security would ensure its recovery. With that much cash at stake the best in the data recovery business will no doubt be unleashed on whatever remains they might recover, but in the unfriendly environment of a festering landfill we’d be curious as to whether chemical action might have corroded the platters to the point at which nothing might remain. Wales has a high rainfall unlike the American southwest, so we doubt it would survive as well as an Atari cartridge.

Meanwhile, tell us your cryptocurrency might-have-beens in the comments.

Landfill Site sign by Geographer, CC BY-SA 2.0.

An automatic fish feeding system mounted on an aquarium

The FishFeeder Keeps Your Fish Fed While You’re Away

August 4, 2022 by Robin Kearey 7 Comments

With summer in full swing in the Northern Hemisphere, millions of people are out on vacation leaving millions of homes empty. Thanks to modern technology it’s easier than ever to keep an eye on those empty homes: internet-connected cameras report suspicious activity, and smart-home devices like curtains and light bulbs can be operated from your holiday home. If you’ve got an aquarium and want to keep your fish well-fed during your vacation, then [FoxIS]’s internet-connected automated fish feeder might come in handy too.

The heart of the system is a 3D-printed mechanism that holds a bottle of fish food in a funnel and dispenses a set amount through a servo-operated shutter. The servo is driven by an ESP32 sitting inside an M5StickC IoT development kit. [FoxIS] wanted to use TinyGo for this project, which unfortunately meant that he couldn’t use the ESP32’s built-in WiFi system due to software limitations. He therefore connected the M5StickC to a Raspberry Pi, which he can log into from anywhere in the world to operate the feeding mechanism or to watch his aquatic pets through a USB camera.

Apart from automating the feeding process, the FishFeeder system also keeps track of the aquarium’s temperature through an IR thermometer and shows reminders for other maintenance tasks, such as changing the water or cleaning the filter. A minor inconvenience is the requirement to have that Raspberry Pi present for internet connectivity, but perhaps a future version of TinyGo will support WiFi on the ESP32 and make the FishFeeder a fully self-contained system.

While 3D-printing is an obvious choice for custom mechanisms like this, you can also make a much simpler system from a Tupperware bin and a drill bit. If metalworking is your thing, you can build really accurate fish feeders too.

Stewart Platform Wields Magic Fingers To Massage Your Scalp

August 4, 2022 by Dan Maloney 13 Comments

Attention Hackaday editors: We on the writing crew hereby formally request budget allocation for installing a Stewart platform head massager on the chair of each workstation in the secret underground writer’s bunker. We think the benefits that will accrue thanks to reduced stress alone will more than justify the modest upfront costs. Thank you for your consideration.

OK, maybe that request is going nowhere, but having been on the receiving end of these strangely relaxing springy scalp stimulators, we can see where [David McDaid] was going with this project. As he clearly states up front, this is a ridiculously over-engineered way to get your scratchies on, but there’s very little not to love about it. Stewart platforms, which can position a surface with six degrees of freedom and range in size from simple ball balancers to full-blown motion simulators, are fascinating devices, and we can’t think of a better way to learn about them than by building one.

Like all Stewart platforms, [David]’s is mechanically simple but kinematically complicated, and he takes great pains to figure out all the math and explain it in an approachable style. The device is mounted with the end-effector pointed down, allowing the intended massagee to insert their noggin into the business end and receive the massage pattern of their choice. Looking at the GIFs below, it’s easy to see why [David] favors the added complexity of a Stewart, which makes interesting patterns like “The Calmer” possible. They’re all intriguing, although the less said about “The Neck Breaker” the better, we’d say.

Hats off (lol) to [David] for this needless complex but entertaining build.

Continue reading “Stewart Platform Wields Magic Fingers To Massage Your Scalp” →

Converting An 80s Typewriter Into A Linux Terminal

August 4, 2022 by Dan Maloney 26 Comments

Typewriters may be long past their heyday, but just because PCs, word processor software, and cheap printers have made them largely obsolete doesn’t mean the world is better off without them. Using a typewriter is a rich sensory experience, from the feel of the keys under your fingers that even the clickiest of PC keyboards can’t compare with, to the weirdly universal sound of the type hitting paper.

So if life hands you a typewriter, why not put it back to work? That’s exactly what [Artillect] did by converting an 80s typewriter into a Linux terminal. The typewriter is a Brother AX-25, one of those electronic typewriters that predated word processing software and had a daisy wheel printhead, a small LCD display, and a whopping 8k of memory for editing documents. [Artillect] started his build by figuring out which keys mapped to which characters in the typewriter’s 8×11 matrix, and then turning an Arduino and two multiplexers loose on the driving the print head. The typewriter’s keyboard is yet used for input, as the project is still very much in the prototyping phase, so a Raspberry Pi acts as a serial monitor between the typewriter and a laptop. The video below has a good overview of the wiring and the software, and shows the typewriter banging out Linux command line output.

For now, [Artillect]’s typewriter acts basically like an old-school teletype. There’s plenty of room to take this further; we’d love to see this turned into a cyberdeck complete with a built-in printer, for instance. But even just as a proof of concept, this is pretty great, and you can be sure we’ll be trolling the thrift stores and yard sales looking for old typewriters.

Continue reading “Converting An 80s Typewriter Into A Linux Terminal” →

30 Free Circuit Simulators Lightly Reviewed

August 4, 2022 by Al Williams 17 Comments

We live in a time where great software is available with the click of a mouse, often for free or — at least — low cost. But there’s a problem: how do you select from so many alternatives? We were interested in [Lee Teschler]’s review earlier this year of 30 free circuit simulators. If you are selecting one or don’t like the one you are currently using, it is well worth the time to review.

There are several on the list that you’ve probably heard of before like GNUCap and LTspice. There are also some lesser-known products. Some of those are just trial or student versions of paid products. Some are branded versions of commercial products (like Tina) or were made free after selling for higher price tags (like MicroCap 12).

Old favorites like Falstad (which is apparently known as Circuit Sims) and TinkerCAD made the list. Many of the trial versions were very limited. For example, DCAClab only provides an NPN bipolar transistor model. Proteus doesn’t let you save or print unless you pay. While the list includes TI’s Tina, it doesn’t seem to mention that TI also provides a free version of PSpice which is a very popular professional product.

While the capsule descriptions are nice, you may want to dig in a little on the ones you are most interested in. For example, Falstad has a great mixed mode that can even include an AVR microprocessor. But there were a few on the list we had not heard of and maybe you’ll find something new there, too.

Reduced Sulfur Emissions Could Cause Climate Shock

August 4, 2022 by Lewin Day 53 Comments

When we talk about emissions these days, we typically talk about cutting them back for the good of the environment. However, the climate system is a complex beast, and one we’re still learning to understand.

As it turns out, cutting back on emissions may have unexpected or undesirable effects. Some scientists are concerned that cuts to human-induced sulfur emissions may actually be warming the Earth.

Continue reading “Reduced Sulfur Emissions Could Cause Climate Shock” →