Mouth-powered Tools That Will Make Your Dentist Cringe

July 31, 2012 by Mike Szczys 25 Comments

Want to try your luck drilling out a PCB with this mouth-powered drill? [Cheng Guo] shows off one of his many mouth-powered tools above. It’s a tiny drill which spins with the opening and closing of your jaw. The concept may seem a bit silly, but his ability to fabricate these machines is fantastic.

The clip after the break starts off with the drilling demo seen above. From there he shows off several different tools. One is a molding machine that uses your breathing to spin a mold, thereby forcing the material inside to conform to its shape. There’s also a wood lathe. You hold the cutting tool in the your mouth and spin the mechanism with a bow and string setup. If you’re good at sucking, his vacuum former is right up your alley. Just heat up the plastic stock in the microwave and suck with all your might. Finally he shows off an extruder. We’re not quite sure how that one works.

Continue reading “Mouth-powered Tools That Will Make Your Dentist Cringe” →

Control Everything In Your Car With The Car Kracker

July 31, 2012 by Brian Benchoff 47 Comments

If your whip is a Honda, Toyota, BMW, Chrysler, VW, or Mini made in the last decade or so, the Car Kracker is for you. This project allows you to connect directly to your car’s computer system, allowing you to display messages on your stereo, play music off an SD card, and even override factory settings like always-on daytime running lights.

The Car Kracker uses ISO 9141, an in-car communications protocol that is now mostly used in foreign (for the US) cars. The build uses a Gadget Gangster Propeller board to connect to the CD changer port and OBD-2 port in the trunk, and the diagnostic port located under the hood.

With the Car Kracker, it’s easy to connect the Aux In on your stereo to an SD card loaded with music, or even plug in an iPod for the poor souls without a 1/8″ jack. Dealer customizations such as turning the ‘door is ajar’ noise off, toggling daytime running lights, and throwing a nav warning up are also possible.

Check out the two videos after the break, and if anyone has any more info on getting this deep into a car’s computer system (a wiki, maybe?), send a link in on the tip line.

Continue reading “Control Everything In Your Car With The Car Kracker” →

A Large Hexapod Made Of Wood And PVC Pipe

July 31, 2012 by Jeremy Cook 7 Comments

Although not the biggest hexapod walker we’ve seen by any means, this one is nonetheless worth a mention. Made with windshield wiper motors, PVC pipe, and lots of wood, it’s still a good size ‘bot. It’s a work in progress, but check out the video of it’s legs being tested as well as one of it’s preliminary assembly after the break.

Control is similar to this little hexapod that we’ve featured before in the the front and back legs are driven by a motor and linked together using threaded rod. In this case though, the rod is 1/4 – 20, much larger than the 4-40 rod used by it’s little predecessor. Also unlike little PegLeg, the middle legs are independently actuated, not linked together. This should allow for some different modes of locomotion.

Different modes of locomotion, that is, if it’s able to walk. Although able to pick itself up, the middle legs are barely strong enough to support the large battery and powerful, but heavy, automotive motors. This is an introductory post to this project, and everything will hopefully be worked out and explained in time. Be sure to check back and see how this robot progresses, and the details of the different elements of this ‘bot. Continue reading “A Large Hexapod Made Of Wood And PVC Pipe” →

Automated Turret Gives You The Upper Hand In Office Warfare

July 31, 2012 by Mike Nathan 17 Comments

TI-office-turret

When your co-workers get on your nerves, the mature recourse is to be the bigger person and simply ignore the obnoxious individual. A team of engineers from TI show us a slightly alternative means of dealing with office mates which is not quite as mature, though far more entertaining.

The office toy cum mechanized weapons system relies on a TI MSP430 LaunchPad, coupled with a custom Turret430 breakout board. The former is the brains of the operation, while the latter houses motor drivers for the motorized turret. The system can be steered throughout its 300 degree range of rotation using an attached joystick, but in the interest of catching their target by surprise, they added an automated mode as well. The automated targeting system uses an attached webcam to pick out victims by the color of their clothing, which seems to work pretty well.

To see the system in action, check out the video embedded below.

Continue reading “Automated Turret Gives You The Upper Hand In Office Warfare” →

Ping Pong Ball Barrage

July 30, 2012 by Mike Szczys 21 Comments

What should you do with your down time between sophomore and junior year at MIT? You better build something awesome. [Christian Reed] didn’t disappoint with his newest creation. He calls it the Ping Pong Mauler and we think that’s an appropriate name. It doesn’t just lunch a ball, it belches forth a relentless barrage.

He certainly has no shortage of ammo. A few garbage bags full of the white orbs number at least 3000 strong, and the plastic drum he’s using as a hopper has room for them all. Jamming is an issue and in the image above you can see him working the agitator with his right hand to prevent a clog. The system is mobile, but the shop vacuum used to propel the balls needs AC power. This means there is a tether that keeps it from roaming too far from home. [Christian] included an air tank in the design but apparently the pressurized air doesn’t do much to help with launch speed. That’s good because pressurized ball guns can be scary.

Check out the video after the break to see the ping pongs fly. We bet they’ll be mowing over some strays out in the yard for at least the rest of this summer.

Continue reading “Ping Pong Ball Barrage” →

Magic Clock Locates Your Friends

July 30, 2012 by Brian Benchoff 15 Comments

Just like the clock from Harry Potter, a team of media informatics students at the University of Munich built a grandfather clock that doesn’t keep track of time; instead, it keeps track of where everyone is, whether it be their university, work, or in prison.

The build uses Android and iOS apps on each team member’s cell phone to send their current location to a web server. A circuit built inside an old grandfather clock the team picked up from eBay communicates with the web server through a WiFly Shield to control a quartet of servos and drive the clock hands.

Because the grandfather clock only came with two clock hands, the team used a series of four concentric shafts to move each hand around the dial. With a bit of clever gear fabrication on their laser cutter, they were able to use unmodified servos move the hands all the way around the clock.

The avatars on the tip of each clock hand are the remains of decapitated LEGO minifigs, a choice that makes sense after viewing the build video available after the break.

Continue reading “Magic Clock Locates Your Friends” →

Getting Connected With Your Home Security System

July 30, 2012 by Mike Szczys 24 Comments

This simple device, paired with some creating code will let you become your own home security monitoring service. It’s called the PhantomLink and [Adam] started the project as a commercial venture. He recently decided to go open source with the hardware and will soon be posting a guide on how to program your own web interface too.

We just looked in on a project which takes control of a security panel using an Arduino. The PhantomLink is focused on not just reusing the input hardware, but monitoring the whole system. It sounds like several different protocols are supported.

The DB9 jack is intended for use with an adapter you can wire yourself. Basically just tap into the terminal block on the alarm controller for your house, then route those connections to the proper pins. A PIC 12F683 monitors the alarm system, pushing data via the WiFi module mounted on the board. With that web connection you can do anything you want by catching and formatting the data.