Wi-Fi 7: The Next Big Leap Or A Whole Lotta Nothing?

September 11, 2023 by 52 Comments

For most people, the Wi-Fi hardware of today provides a perfectly satisfactory user experience. However, technology is ever-evolving, and as always, the next advancement is already around the corner. Enter Wi-Fi 7: a new standard that is set to redefine the boundaries of speed, efficiency, and connection reliability.

Wi-Fi 7 isn’t just another incremental step in the world of wireless tech. It’s promising drastic improvements over its predecessors. But what does it bring to the table? And how does it differ from Wi-Fi 6E, which is still relatively fresh in the market? Read on.

Continue reading “Wi-Fi 7: The Next Big Leap Or A Whole Lotta Nothing?” →

Atari Introduces A New Old Console

September 11, 2023 by 29 Comments

Readers of a certain age no doubt remember the Atari 2600 — released in 1977, the 8-bit system helped establish the ground rules for gaming consoles as we know them today, all while sporting a swanky faux wood front panel designed to make the system look at home in contemporary living rooms.

Now, nearly 50 years later, the Atari 2600 is back. The new system, imaginatively named the 2600+, looks exactly like the original system, albeit at around 80% scale. It will also work the same way, as the system will actually be able to play original Atari 2600 and 7800 cartridges. This is something of a surprise when compared to the previously released retro consoles from the likes of Sony and Nintendo, as they were all limited to whatever games the company decided to pack into them. Of course, this probably has something to do with the fact that Atari has been selling newly manufactured 2600 games for some time now.

Although it will play original cartridges, it’s still an emulated console at heart. There aren’t a lot of technical details on the product page, but it does say the 2600+ is powered by a Rockchip 3128 SoC with 256 MB of DDR3 RAM and 256 MB eMMC flash. Some quick searching shows this to be a pretty common board for set-top gadgets, and wildly overpowered considering the meager requirements for emulating a game console from 1977. We wouldn’t be surprised to find it’s running some kind of minimal Linux install and using one of the existing open source emulators.

While the 2600+ sports the same 9-pin D-sub controller connectors as the original console, it thankfully embraces modern display technology and outputs over HDMI. Each console will come with a “10-in-1” cartridge that contains some of the console’s most popular titles, as well as a modernized version of the original single-button joystick. (Unlike the original, the 2600+ comes with only a single joystick — the other is sold separately.)

Atari won’t start shipping the 2600+ until this fall, but they’re currently taking preorders for the $130 system. We’re eager to see somebody pull it apart, as the earlier “mini” consoles ended up being ripe for hacking.

Continue reading “Atari Introduces A New Old Console” →

Bringing Da Vinci’s Saw Mill To Life

September 11, 2023 by 30 Comments

DaVinci’s notebook — the real one, not the band — was full of wonderous inventions, though many were not actually built and probably weren’t even practical with the materials available at the time (or even now). [How To Make Everything] took one of the Master’s drawings from 1478 of a sawmill and tried to replicate it. How did he do? You can see for yourself in the video below.

There are five different pieces involved. A support structure holds a water wheel and a saw. There’s a crank mechanism to drive the saw and a sled to move the wood through the machine. It sounds simple enough, although we were impressed and amused that he made his own nails to be authentic. No Home Depot back in the 1470s, after all.

Watching him produce, for example, castle joints, makes us think, “Hey, we could do that!” But, of course, we probably can’t, at least not by hand. We must admit we are pretty dependent on CNC tools and 3D printing, but we admire the woodwork, nevertheless. There’s some pretty cool metal working, too.

We thought the waterwheel would be the easy part, but it turned out to be a bit of a problem. Things worked, but it was slower than you would think. We’ve seen sawmills put together before. Da Vinci worked for money, and there was always money in weapons so he did design a lot of them, too.

Continue reading “Bringing Da Vinci’s Saw Mill To Life” →

New Electric Motor Tech Spins With No Magnets

September 10, 2023 by 58 Comments

When you think of electric motors, you usually think of magnets. But magnets are heavy, and good magnets can pose problems when you need lots of them. A technology called SESM (separately excited synchronous motors) requires no magnets, but now ZF — a German company — claims to have a different scheme using inductive excitation. Motors that employ SESM tend to be larger and require a direct current to turn the rotor. This DC is often supplied by slip rings or an AC induction with a rectifier. The innovation here is that the inductive excitation is built completely into the shaft, which the company claims makes the motor both compact and powerful.

This kind of motor is usually destined for electric vehicles. The company claims the motor reduces losses by about 15% over conventional techniques. To maximize efficiency, conventional SESM uses slip rings or brushes to transmit power to the shaft. However, ZF claims their inductive improvements are even more efficient and can reduce axial size by around 90 mm.

Another advantage of the technology is that there is no need to provide a dry space for slip rings. That means fewer seals and the ability to cool the rotor with oil as you would with a motor containing permanent magnets. The company plans to offer a 400 V version of the motor and an 800 V that uses silicon carbide electronics.

If you build your own motors, have you tried anything like this? Usually, we don’t see motors this big, of course. We have, however, seen builds of reluctance motors that don’t use magnets.

Grannophone Helps You Stay In Touch

September 10, 2023 by 20 Comments

Whether it’s distance, pandemics, or both that separate you from your elderly loved ones, what’s the best idea for communicating with them so they don’t suffer from loneliness on top of issues like dementia? We’d say it’s probably something like [Stefan Baur]’s Grannophone.

Back in late 2020, a Twitter user named [Nitek] asked the Internet what could be done in the way of a grandma-friendly video-conferencing solution, provided Grandma has a TV and a broadband internet connection. At first, [Stefan] was like, just get her an old iPad and FaceTime with her. But the question got him thinking. And prototyping.

Grannophones are essentially Linux machines with a video-capable SIP client connected over a VPN for privacy reasons. In simple mode, picking up the handset of one Grannophone will call the other, but more complicated configurations are possible. We particularly like that replacing the handset automatically obscures the camera. That’s a nice touch.

At this point, the Grannophone is a work in progress. The idea is that they be extremely easy to build at the kitchen table, like on the order of disposable Swedish furniture. If you can contribute to the project, please do. Be sure to check out the demonstration video after the break.

On the other hand, if Granny is 1337, you could always video-conference in terminal.

Continue reading “Grannophone Helps You Stay In Touch” →

Hackaday Links Column Banner

Hackaday Links: September 10, 2023

September 10, 2023 by 17 Comments

Most of us probably have a vision of how “The Robots” will eventually rise up and deal humanity out of the game. We’ve all seen that movie, of course, and know exactly what will happen when SkyNet becomes self-aware. But for those of you thinking we’ll get off relatively easy with a quick nuclear armageddon, we’re sorry to bear the news that AI seems to have other plans for us, at least if this report of dodgy AI-generated mushroom foraging manuals is any indication. It seems that Amazon is filled with publications these days that do a pretty good job of looking like they’re written by human subject matter experts, but are actually written by ChatGPT or similar tools. That may not be such a big deal when the subject matter concerns stamp collecting or needlepoint, but when it concerns differentiating edible fungi from toxic ones, that’s a different matter. The classic example is the Death Cap mushroom (Amanita phalloides) which varies quite a bit in identifying characteristics like color and size, enough so that it’s often tough for expert mycologists to tell it apart from its edible cousins. Trouble is, when half a Death Cap contains enough toxin to kill an adult human, the margin for error is much narrower than what AI is likely to include in a foraging manual. So maybe that’s AI’s grand plan for humanity — just give us all really bad advice and let Darwin take care of the rest.

Continue reading “Hackaday Links: September 10, 2023” →

An 8-bit ISA card with VGA, HDMI and composite video connectors

Upgraded Graphics Gremlin Adds HDMI Video To Vintage PCs

September 10, 2023 by 34 Comments

Although new VGA-equipped monitors can still be bought, the old standard is definitely on its way out by now, being replaced by high-speed digital interfaces like HDMI and DisplayPort. It therefore makes sense to prepare for a VGA-less future, as [Yeo Kheng Meng] is doing. He designed an 8-bit ISA display card with an HDMI output that enables even the very first generation of PCs to talk to a modern monitor.

The design is based on the Graphics Gremlin by [Tube Time], which is an 8-bit ISA display card that aims to be software compatible with the obsolete MDA and CGA display formats while outputting a clean VGA signal. [Yeo Kheng Meng] modified the board by adding a TFP410 HDMI bus driver and replacing the rarely-used 9-pin RGBI connector with an HDMI version. He also updated the HDL code for the Lattice FPGA, which forms the heart of the graphics card, to account for the new digital output. While he was at it, he also added a few features he was missing in the original product, such as the option to select the color displayed in MDA mode and the ability to output both HDMI and composite video at the same time.

The video below shows the updated card in action in an IBM 5155 Portable PC. The HDMI port connects to a modern monitor, while the composite video output is routed to the 5155’s internal CRT as well as a small color monitor on top. The IBM thereby joins a small list of retro computers that have received an HDMI upgrade — the Amiga 500 and PlayStation 2 being other examples. HDMI might be a lot more complex to work with than VGA, but luckily there are open-source implementations that do much of the work for you.

Continue reading “Upgraded Graphics Gremlin Adds HDMI Video To Vintage PCs” →