Ask Hackaday: How Should Hackers Handle IP Agreements?

March 6, 2017 by Dan Maloney 82 Comments

My buddy Harold recently landed a new job at a great technology company. It came at a perfect time for him, having just been laid off from the corporate behemoth where he’d toiled away as an anonymous cog for 19 years. But the day before he was to start, the new company’s HR folks sent him some last-minute documents to sign. One was a broad and vaguely worded non-compete agreement which essentially said he was barred from working in any related industry for a year after leaving the company.

Harold was tempted not to sign, but eventually relented because one needs to put food on the table. Thankfully he’s now thriving at the new company, but his experience got me thinking about all the complications hackers face with the day jobs that so many of us need to maintain. Non-competes and non-disclosures are bad enough, but there’s one agreement that can really foul things up for a hacker: the Intellectual Property Agreement.

Continue reading “Ask Hackaday: How Should Hackers Handle IP Agreements?” →

Record Players Explained For The Streaming Generation

March 3, 2017 by Jenny List 68 Comments

How do you consume your music, these days? Aside from on the radio, that is. Do you play MP3 or other files on your phone and computer, or perhaps do you stream from an online service? If you’re really at the cutting edge though you’ll do none of those things, because you’ll be playing it on vinyl.

The legendary Technics SL1200 direct-drive turntable, as used by countless DJs. Dydric [CC BY-SA 2.5)], via Wikimedia Commons. — The legendary Technics SL1200 direct-drive turntable, as used by countless DJs. Photo by Dydric CC-BY-SA 2.5

A few years ago reporting on a resurgence of sales of vinyl records was something you would never have expected to see, but consumer tastes are unpredictable. Our red-trousered and extravagantly bearded hipster friends have rediscovered the glories of the format, and as a result it’s popping up everywhere. For those of us who are old enough to have genuinely been into the format before it was cool again, the sight of Sergeant Pepper and Led Zeppelin II on 12″ at outrageous prices on a stand at the local supermarket is a source of amusement. It’s good to see your first love back in vogue again, but is it really the £20($25) per album kind of good?

With the turntable having disappeared as an integral part of the typical hi-fi setup the new vinyl enthusiast is faced with a poor choice of equipment. Often the best available without spending serious money at an audiophile store is a USB device with the cheapest possible manufacture, from which the playback will be mediocre at best. We’ve lost the body of collective knowledge about what makes a good turntable to almost thirty years of CDs and MP3s, so perhaps it’s time for a quick primer.

Continue reading “Record Players Explained For The Streaming Generation” →

Chicago To Host Hackaday Unconference

March 2, 2017 by Mike Szczys 41 Comments

We’re excited to announce that Chicago will play host to the Hackaday Unconference on March 18th. We are happy to expand our unconference plans to include this event at Pumping Station One from 1-8pm on 3/18.

Astute readers will notice that this is the second location we have announced this week. On Monday we shared the news that San Francisco would host an unconference. Hackaday’s [Sophi Kravitz] and [Jordan Bunker] are organizing things in SF. [Brian Benchoff], [Bob Baddeley], and [Mike Szczys] will be in Chicago for this event that takes shape based on what you find most interesting.

We’re excited that PS:One is opening their doors for us. We’ll make sure there’s food, beverage, some exciting hardware-based door prizes, and other select swag.

Hackaday Unconference is Based on You

The Hackaday Unconference is all about finding interesting talks from anyone who attends. If you go, and you definitely should, be ready to stand up and deliver eight minutes on something that you find interesting right now. The day will start by going around and asking everyone for a talk title or topic. We’ll all make a collective decision on the schedule for the day and roll with it as talks are bound to spawn extemporaneous discussion and follow up presentations that build on the most exciting of concepts. Unconferences are interactive and not bound by the traditional presenter/audience divide of a conference.

You may speak about anything you like, but it sometimes deciding what to talk about is easier if there are some constraints. Consider the theme of the Hackaday Unconference to be Build Something That Matters. You hear this a lot from us because we think it is important. There is immense talent and incredible experience found in the Hackaday community and we like to take some time in life to direct that for the good of all people. If you have an idea to direct creative energy toward high ideal, it’s likely to make a great presentation.

Soak Up the Excitement to Propel Your Next Project

Pressure is low, excitement is high, and the potential for something spontaneous and awesome to happen is palpable. The ‘here and now’ aspect of an unconference sets it apart from events where speakers, talk subjects, and slide decks are decided upon weeks ahead of time. RSVPs will fill up. Don’t miss out on this chance to jumpstart your excitement for a current project, or to discover the direction of your next adventure.

That Time I Spent $20 For 25 .STL Files

March 1, 2017 by Brian Benchoff 72 Comments

Last weekend I ran out of filament for my 3D printer midway through a print. Yes, it’s evidence of poor planning, but I’ve done this a few times and I can always run over to Lowe’s or Home Depot or Staples and grab an overpriced spool of crappy filament to tide me over until the good, cheap filament arrives via UPS.

The Staples in my neck of the woods was one of the few stores in the country to host a, ‘premium, in-store experience’ featuring MakerBot printers. Until a few months ago, this was a great place to pick up a spool of filament that could get you through the next few hours of printing. The filament cost about three times what I would usually pay, but it was still good quality filament and they usually had the color I needed.

This partnership between MakerBot and Staples fell through a few months ago, the inventory was apparently shipped back to Brooklyn, and now Robo3D has taken MakerBot’s space at the endcap in Staples. Last weekend, I picked up a 1kg spool of red PLA for $40. What I found next to this filament left me shocked, confused, and insatiably curious. I walked out of that store with a spool of filament and a USB thumb drive loaded up with twenty-five STL files. This, apparently, is the future of 3D printing.

Continue reading “That Time I Spent $20 For 25 .STL Files” →

Friday Hack Chat: Raspberry Pi Principal Hardware Engineer Roger Thornton

March 1, 2017 by Mike Szczys 4 Comments

Have you heard about the new Raspberry Pi Zero W which now includes WiFi and Bluetooth? Of course you have. Want to know what went into the addition to the popular design? Now’s the time to ask when this week’s Hack Chat is led by Roger Thornton, chief hardware engineer for Raspberry Pi.

Raspberry Pi was born on February 29th, 2012 and has seen a remarkable number of hardware flavors and revisions. Throughout, the hardware has been both dependable and affordable — not an easy thing to accomplish. Roger will discuss the process his team uses to go from concept, all the way through to the hands of the user. It’s an excellent chance to ask any questions you have from soup to nuts.

The Hack Chat is scheduled for Friday, March 3rd at noon PST (20:00 GMT).

Here’s How To Take Part:

Our Hack Chats are live community events on the Hackaday.io Hack Chat group messaging.

Log into Hackaday.io, visit that page, and look for the ‘Join this Project’ Button. Once you’re part of the project, the button will change to ‘Team Messaging’, which takes you directly to the Hack Chat.

You don’t have to wait until Friday; join whenever you want and you can see what the community is talking about.

Upcoming Hack Chats

Mark your calendar for Friday March 10th when Hack Chat features mechanical manufacturing with members from the Fictiv team.

Ask Hackaday: What’s Your Etchant?

February 28, 2017 by Al Williams 88 Comments

Although the typical cliché for a mad scientist usually involves Bunsen burners, beakers, and retorts, most of us (with some exceptions, of course) aren’t really chemists. However, there are some electronic endeavors that require a bit of knowledge about chemistry or related fields like metallurgy. No place is this more apparent than producing your own PCBs. Unless you use a mill, you are probably using a chemical bath of some sort to strip copper from your boards.

The standard go-to solution is ferric chloride. It isn’t too tricky to use, but it does work better hot and with aeration, although neither are absolutely necessary. However, it does tend to stain just about everything it touches. In liquid form, it is more expensive to ship, although you can get it in dry form. Another common etchant is ammonium or sodium persulphate.

There’s also a variety of homemade etchants using things like muriatic acid and vinegar. Most of these use peroxide as an oxidizer. There’s lots of information about things like this on the Internet. However, like everything on the Internet, you can find good information and bad information.

When [w_k_fay] ran out of PCB etchant, he decided to make his own to replace it and wrote a great guide on how this is done. He found a lot of vague and conflicting information on the Internet. He read that the vinegar solution was too slow and the cupric acid needs a heated tank, a way to oxygenate the solution, and strict pH controls. However, he did have successful experiments with the hydrochloric acid and peroxide. He also used the same materials (along with some others) to make ferric chloride successfully.

Continue reading “Ask Hackaday: What’s Your Etchant?” →

The Tiko Printer: What Happens When You Innovate Too Much

February 27, 2017 by Brian Benchoff 76 Comments

Sometime in the very distant future, the Universe will become the domain of black holes. Energy and entropy will be compressed into minuscule quantum fluctuations. Even in this domain of nothingness, there will still be one unassailable truth: you should not buy a 3D printer on Kickstarter.

We’re no strangers to failed 3D printer crowdfunding campaigns. Around this time last year, backers for the Peachy Printer, an inordinately innovative resin printer, found out they were getting a timeshare in Canada instead of a printer. This was unusual not because a crowdfunding campaign failed, but because we know what actually happened. It’s rare to get the inside story, and the Peachy Printer did not disappoint.

For the last few months, we’ve been watching another crowdfunding campaign on its long walk to the gallows. The Tiko 3D printer is another 3D printer that looks innovative, and at the time of the crowdfunding campaign, the price couldn’t be beat. For just $179 USD, the backers of the Tiko printer would receive a 3D printer. Keep in mind the Tiko launched nearly two years ago, when a bargain-basement printer still cost about $400. Fools and money, or something like that, and the Tiko 3D printer campaign garnered almost three million dollars in pledges.

Now, after almost two years of development, Tiko is closing up shop. In an update posted to the Tiko Kickstarter this week, Tiko announced they are laying off their team and winding down operations. It’s a sad but almost predictable end to a project that could have been cool. Unlike so many other failed crowdfunding campaigns, Tiko has given us a post-mortum on their campaign. This is how the Tiko became a standout success on Kickstarter, how it failed, and is an excellent example of the difference between building one of something and building ten thousand.

Continue reading “The Tiko Printer: What Happens When You Innovate Too Much” →