Navid Gornall Eats His Own Face

May 18, 2016 by Elliot Williams 27 Comments

Navid Gornall is a creative technologist at a London advertising agency, which means that he gets to play with cool toys and make movies. That also means that he spends his every working hour trying to explain tech to non-technical audiences. Which is why he was so clearly happy to give a talk to the audience of hardware nerds at the Hackaday Belgrade conference.

After a whirlwind pastiche of the projects he’s been working on for the last year and a half, with tantalizing views of delta printers, dancing-flame grills, and strange juxtapositions of heat sinks and food products, he got down to details. What followed was half tech show-and-tell, and half peering behind the curtain at the naked advertising industry. You can read our writeup of the highlights after the video below.

Continue reading “Navid Gornall Eats His Own Face” →

DIY USB Type C

May 17, 2016 by Al Williams 30 Comments

For many years, the humble serial port was one of the best ways to communicate with an embedded system. Then USB ports became more popular and serial ports started to vanish. These days, even if you’re using a serial protocol to communicate with the microcontroller, it’s often over USB. And USB provides a convenient source of 5 V too. In short, we’ve made our peace with USB.

And then they go and change it. USB type C is a small connector that is reversible and has more options for power and connectivity. However, it is yet another new interface to figure out. [Scorpia] recently posted an article about USB type C that you may find useful.

Continue reading “DIY USB Type C” →

DIY PCB Fixture Helps You Spread The Paste

May 14, 2016 by Elliot Williams 6 Comments

(Yeah, we don’t know what that title means either.) But holding your PCBs down in one place and nicely registered while you spread solder paste over them is a problem that needs solving, and [Carsten] did it nicely.

High volume PCB manufacturers have expensive screen printers to do this. The standard hardware hacker solution is to tape some scrap PCBs of the same thickness down to the table to hold the PCBs solidly in place. But if you’re doing a large run, and if you’re already firing up the laser to cut out mylar stencils, you might as well cut out some PCB-holding fixtures to match.

[Carsten]’s blog entry is short on details, but you get the idea just from looking at the picture, right? Adding registration pins to the holder that engage with the stencils could make this a real time-saver as well. As long as you’re lasering the stencil and the holder, there’s nothing stopping you. It’s a simple idea, but a good one, so we thought we’d share. Our only remaining question: what’s a Karate Light?

The Ultimate Traveler’s Toolkit

May 14, 2016 by James Hobson 9 Comments

Looking for a better way to store your tools during transportation? While we certainly wouldn’t recommend trying to check this thing as a carry-on (oh and prepare for it to be searched even in checked luggage), this clever use of a road case is probably one of the best tool boxes we’ve ever seen.

This is [Robb Godshaw’s] tool box. It’s been developed over the past five years as he’s become a skilled maker. You might remember him best from his ironic project “Why are we limited to C-Clamps?” — a clamp offering of the entire alphabet.

He also picked up the road case close to home for Hackaday — at Apex Electronics Surplus in LA — one of our favorite places to find parts. But the most clever part of the project is the way he’s divided the case for different tools.

Continue reading “The Ultimate Traveler’s Toolkit” →

We’re Headed To Maker Faire, Will You Be There?

May 13, 2016 by Mike Szczys 10 Comments

The Hackaday Crew will be descending on San Mateo next weekend for Bay Area Maker Faire. Will you be there? Gerrit and I will be looking in every booth and byway for amazing hacks, new hardware, and anything else that tickles the fancy of hackers everyone.

We certainly didn’t miss the massive tin spider seen above at last year’s event. But it’s a huge venue, and I’m always afraid we’re going to miss something epic. If you’re exhibiting and want us to stop by, leave a comment below. If you know of something awesome that we shouldn’t miss this year, we’d love to hear about that too.

I’d also like to invite you to hang out with Hackaday on Saturday night. When the Faire closes its gates, something amazing happens every year at O’Neil’s Irish Pub. Don’t miss it!

Need a Ticket?

Texas Instruments sent us 4 Friday passes, and 9 weekend passes which we want to give away. The fairest way of doing that is a drawing using Twitter.

To enter, simply Tweet something about your favorite 2016 Hackaday Prize entry, including @Hackaday @TXinstruments #FairePass in the message. Here’s what an example Tweet looks like (don’t worry, I’m not eligible to win).

On Sunday, 4pm PDT we’ll make a list of all the Twitter handles that sent out a Tweet, then use random.org to choose 6 random numbers from that list. The second giveaway will happen at 4pm PDT on Wednesday 5/18, using the same procedure to choose the remaining 7 winners.

All of the obvious contest stuff applies: employees and family of Hackaday, Supplyframe, and TI are not eligible. Results of the drawing are final. We can’t substitute other prizes (we’re just giving away extra tickets) and this giveaway has no bearing on any other contests or winner selection.

Captain America’s Mighty Shield With 7200N Of Powerful Electromagnets!

May 13, 2016 by James Hobson 57 Comments

At Hackaday, sometimes we nerd out a bit too hard over comic book movies. With Captain America: Civil War in theaters, I knew I had to do a project dedicated to the movie — so I made a ridiculously over powered electromagnet bracer. The hope? To attract a Captain America replica shield from short distances.

I had the idea for this project a while ago after watching Avengers: Age of Ultron.

If you’re not familiar, it appears Captain America gets a suit upgrade (presumably from Stark himself) that features some pretty awesome embedded electromagnets allowing him to call his shield back to him from afar.

Now unfortunately, electromagnets aren’t that strong and I knew I wouldn’t be able to achieve quite the same effect as good ol’ CGI — but I’d be darned not to try! Continue reading “Captain America’s Mighty Shield With 7200N Of Powerful Electromagnets!” →

That’s No Moon – That’s A Bamboo Death Star

May 12, 2016 by Dan Maloney 25 Comments

At first glance, [Frank Howarth]’s turned bamboo Death Star seems like a straight woodworking project. No Arduino controlled lights, no Raspberry Pi for audio clips of an X-wing attack or escaping TIE fighter. In other words: where’s the hack?

It’s a freaking bamboo Death Star!

If that’s not enough for you, check out the pattern on the surface of the finished model. That’s not painted on – those are the layers of the laminated bamboo lumber used to create the rings [Frank] used to form the structure. After lots of turning, sanding and polishing, the characteristic vascular bundles of the bamboo create light and dark panels for a convincing effect of the Death Star’s surface detail. And although we like the natural finish, we can imagine a darker stain might have really made the details pop and made for an effect closer to the original.

Still not hackish enough? Then feast your eyes on [Frank]’s shop. It’s a cavernous space with high ceilings, tons of natural light, and seemingly every woodworking machine known to man. While the lathe and tablesaw do a lot of the work for this build, the drool-worthy CNC router sees important duty in the creation of the multiple jigs needed for the build, and for making the cutout for the superlaser, in what must have been a tense moment.

Bamboo is an incredible material, whether for fun builds like this or for more structural uses, like a bamboo bike. All this bamboo goodness puts us in the mood to call on [Gerrit Coetzee] for a new installment on his “Materials You Should Know” series.

Continue reading “That’s No Moon – That’s A Bamboo Death Star” →