Pre-order This Graphically Stunning Print Edition Of Hackaday

Now is your chance to hold a piece of Hackaday in your hands. Last year we announced our first ever print edition. We continue that tradition with a much bigger offering. Hackaday Omnibus vol #02 gathers the best content from Hackaday over the last year. This includes in-depth original content, incredible art, the events that mattered over the last 12 months, and a few cryptic easter eggs.

omnibus-vol2-on-your-coffee-table[Joe Kim], Hackaday’s Art Direct, really outdid himself with the cover this year. Inspired by an epic movie, the illustration includes a shoutout to almost every article found within. Of course there is a lot more of his work inside, along with the efforts of dozens of writers, artists, editors, and more.

All 128 pages of Omnibus vol #02 were painstakingly laid out by [Aleksandar Bradic] who enlisted the help of a dedicated core of Hackaday.io members to help pore over the final drafts, ensuring the presentation is immaculate. Along the way some of them teamed up to roll in those easter eggs that I previously mentioned. We don’t even know what all of it means, you should be the first to solve the mystery.

Most of the 31 articles that grace these pages have run past the front page of Hackaday. But there are a few that were written specifically for the print edition. These will be published on our front page starting in 90 minutes and continuing for a few weeks. It is important to us to share these great works without the need to purchase anything. But the Omnibus is truly one of the coolest pieces of tech literature that you can own. It deserves a place on your coffee table, reception area at work, and as a gift for all who love to know how things work, how things were built, and the legacy of knowledge that has come from generations of hacking.

We’re only running a single printing of this gorgeous volume. Make sure you get one of your own by placing a pre-order now. Be one of the first 500 using coupon code OMNIBUS2015 and get it for just $10! Show that you support great content and help make future projects like this possible.

Garbage Can CNC Machine Build

Forget sourcing parts for your next project from some fancy neighborhood hardware store. If you really want to show your hacker chops, be like [HomoFaciens] and try a Dumpster dive for parts for a CNC machine build.

OK, we exaggerate a little – but only a little. Apart from the control electronics, almost everything in [HomoFacien]’s build could be found by the curb on bulk-waste pickup day. Particle board from a cast-off piece of flat-pack furniture, motors and gears from an old printer, and bits of steel strapping are all that’s needed for the frame of a serviceable CNC machine. This machine is even junkier than [HomoFacien]’s earlier build, which had a lot more store-bought parts. But the videos below show pretty impressive performance nonetheless.

Sure, this is a giant leap backwards for the state of the art in DIY CNC builds. but that’s the point – to show what can be accomplished with almost nothing, and that imagination and perseverance are more important for acceptable results than an expensive BOM.

With that in mind, we’re throwing down the gauntlet: can anyone build a CNC machine from cardboard and paperclips?

Continue reading “Garbage Can CNC Machine Build” →

Stronger 3D Printed Parts

When [hobbyman] wanted some 3D printed parts to attach a bag to his bike, he was worried that the parts would not be strong enough to hold when the bag was full. He decided to find a way to reinforce the part with fiberglass and epoxy. His first model had holes and grooves to be filled in with epoxy.

However, after working with the part for a bit, he decided to take a different approach. Instead of making the part nearly solid plastic with space for the epoxy, he instead created the part as a shell and then filled it with fibers and epoxy. After it all cured, a little sanding started removing some of the plastic shell and what was left was mostly a cast fiberglass part (although some of the plastic was left on).

Continue reading “Stronger 3D Printed Parts” →

The Best Conference Badge Hacking You’ve Ever Seen

72EJpM5noCVCOQOeMV74_fmZeSQKcPxiqv70JYc9psgAs with any proper hardware con, the Hackaday Supercon needed a badge, and preferably one that was electronic. This conference centered around hardware creation, and the badge was no exception.

Designed on a tight timeline, it was possible to deliver a PCB badge for the attendees but it didn’t include microcontrollers, FPGAs, or software defined radios. This blank slate was the foundation for a completely unconstrained freestyle electronics soldering session.

The front of the badge includes a matte black solder mask with Truchet tiles of traces. Put multiple badges edge-to-edge and the pattern continues indefinitely. Inside of each curved trace is a through-hole via and those makes up a grid of holes on the back of the badge. On that back side there are also two rectangular grids that presented a nice area to which hackers soldered their components.

More than a few people took up the challenge of hacking their badge, and despite a strange pitch for the through holes (0.230″), and traces that didn’t go anywhere, there were some amazing builds. I would go so far to say that the badge hacking at the Supercon was the best I’ve ever seen, and this includes DEFCON and CCC.

Continue reading “The Best Conference Badge Hacking You’ve Ever Seen” →

Review: Voltera V-One PCB Printer

Back in Feburary, I was one of the first people to throw some cash at the Voltera V-One circuit board printer on Kickstarter. With an anticipated delivery date of Q4 2015, I sat back and waited. This week, my V-One arrived!

I’ll preface this article by pointing out that I do know the folks at Voltera as we went to university together. That being said, I did put down my own cash for the device, so I’ve bought the right to be critical. I also have no relationship with their company. In this article, we’ll go through unboxing and printing, then get into a review of the V-One based on what we’ve seen so far.

Continue reading “Review: Voltera V-One PCB Printer” →

The Story Of The 2015 Hackaday Prize

This week we’ve covered the Grand Prize and Best Product winners of the 2015 Hackaday prize: Eyedrivomatic and Vinduino. These are both amazing and worthy projects, but the real story of the Hackaday Prize isn’t about the prizes: it’s about nine months during which talented people worked toward a common good.

If you didn’t have a chance to attend the Hackaday SuperConference, here is the video of the ceremony. Take a look at the presentation which was made in front of a packed house of about 300 attendees. Then join us after the break for a look back on the last nine amazing months.

Continue reading “The Story Of The 2015 Hackaday Prize” →

Video Standards Are More Than Video Signals

The number of hours we spend staring at screens is probably best unknown, but how about the technology that makes up the video on the screen? We’ve all seen a reel-to-reel projector on TV or in a movie or maybe you’re old enough to have owned one, surely some of you still have one tucked away real nice. Whether you had the pleasure of operating a projector or just watched it happen in the movies the concept is pretty straight forward. A long piece of film which contains many individual frames pass in front of a high intensity lamp while the shutter hides the film movement from our eyes and our brain draws in the imaginary motion from frame to frame. Staring at a Blu-ray player won’t offer the same intuition, while we won’t get into what must the painful detail of decoding video from a Blu-ray Disc we will look into a few video standards, and how we hack them.

Continue reading “Video Standards Are More Than Video Signals” →