[youtube=http://www.youtube.com/watch?v=0uXIqQxarYI]
[atduskgreg] posted this cool looking rig. That’s a batting glove, chopped up and equipped with a flex sensor and a pressure sensor. The end goal was to create a new method of drawing. You can see he’s interfaced with the servos decently. It seems fairly responsive and intuitive. Looking at his results though, make us wonder if all that effort was worth it. We would probably apply this rig to some kind of animatronics.
[John] wanted to take a pong clock and put it in a wristwatch form factor. Take an afternoon and pour over his detailed build logs. This multi-year project is done with meticulous cleanliness that makes us jealous. He’s milled the case and buttons himself, achieving a professional look that equals or surpasses the quality of some commercially available “gaming” watches. The project centers around an OLED display driven by a TI MSP430F2013 processor. Don’t miss the video after the break covering prototyping, PCB work, case milling, and the watch in action. Currently, this is the third generation of development but with a project this exciting, are you ever really finished? Continue reading “Pong On Your Wrist”
We’re not 100% sure the usefulness of this hack, but it is extremely interesting regardless and will probably make a lot of furries happy. WolfTronix presents their method for creating a realistic animatronic wolf tail. It uses an Atmel MCU controlling two servos alongside a mess of Klixx toys and paper clips to produce a nice wag motion. The guide is extremely detailed and looks to be fun, so long as you don’t mind the monotonous task of shaving off potentially hundreds of ‘nubs’ as they call them. Either way, you’ll definitely have the best (and only…) tail on the block.
Thanks [J. Peterson]
[youtube=http://www.youtube.com/watch?v=WCTvggKuPvU&feature=player_embedded]
Robot enthusiast [Vitalijus Rodnovas] built this rig to allow a humanoid robot to mimic his own body movements in real time. [Rodonovas] refers to his man-machine interface as a “master-slave suit,” but elsewhere this is often called a waldo after a prescient 1942 [Robert Heinlein] novella. This project page is slight on details and is mostly written in his native Lithuanian, but the pictures speak volumes, and with a little help from Google Translate we can learn the essential facts: The robot itself is a commercially-available kit, the Kondo KHR-1HV from Japan. The custom-built harness uses a collection of surplus Soviet-era military potentiometers (acquired on eBay) to read the positions of his elbows and shoulders, then an ATmega8-based interface board translates these readings into motion commands sent to the robot’s onboard controller. Some additional notes and code can be found on the RoboSavvy Forum.
Does it work? Just watch. His grin as the video progresses is infectious!
Hack a Day has previously covered other Waldos, but this latest deserves style points for its lightweight simplicity.
[youtube=http://www.youtube.com/watch?v=ZBFoFYhC9B4]
This is the Illuminato X Machina, a “cellular” style computing system. Each unit is a fully functioning computer with its own processor, storage and communications. You can watch above as a change in the operating software is propagated across the grid. You can see the LEDs in the video going nuts, there are actually LEDs on the sides too. [Justin] described it to us as a personal fireworks show on your desk. This system is fully open with the schematics and source code available on their site. You might recognize these guys too, we covered their Open Source GameBoy.
In 2006, Defcon 14 premiered a unique electronic badge. All it did was blink, but it raised the bar for what was expected from a hacker conference badge. In 2007, they went from 2 LEDs to 95 in a scrolling marquee. Along with a POV mode, the badge had two capacitive switches to let the user edit the displayed text. Defcon 16’s badge featured an IR transmitter and receiver for transferring files from an SD card. It worked as a TV-B-Gone and had pads to access a USB bootloader. That was the same year that The Last Hope debuted their RFID tracking badges.
This year the official Defcon badge reacted to sound, but they were no longer the only game in town. Ninja Networks brought their 10 character party badges with a built in debugger. The Arduino compatible HackTheBadge 1.0 also made an appearance. With these new entrants into the field, we wondered what you’d want to see in your ideal badge. What badge would you want to see at next year’s Defcon? Leave you comments below and keep in mind that it should be an idea that is easy to cheaply mass produce.
UPDATED: Forgot to mention the Neighborcon 2 badge based on the GoodFET20.
[Photo: Ninja Networks]
[Martin] tipped us off to HackTheBadge 1.0. Possibly more elusive than the NinjaBadge, HackTheBadge has a Dpad, a 3×5 LED matrix, Arduino compatable headers, and 46 GPIO channels. You can download the open source plans if you didn’t get one at Defcon. You probably didn’t, there were only 14 given out. You can also order one pre assembled. This makes us wonder, does being low in quantity qualify this as elusive?
