NYT Crossword Decision Puzzles Many

September 24, 2021 by Chris Lott 48 Comments

Over at the New York Times (NYT) crossword puzzle desk, newly-appointed Games Editorial Director Everdeen Mason has caused a bit of a ruckus and hubbub (both six letter words with U as the 2nd and 5th letter) among digital puzzle solvers. In a short article published in early August, Ms. Mason announced the end of support for the crossword-solving program Across Lite, abruptly terminating a relationship between the two organizations spanning 25 years. But the ramifications extend much deeper than just one application.

The NYT first published its now-famous crossword puzzle back in 1942, appearing every Sunday, and in 1950 it became a daily feature. In 1993, Will Shortz was chosen as the fourth Crossword Puzzle Editor, a position he still holds today. The NYT online crossword puzzles first appeared in 1996 — puzzle files could be downloaded by modem and solved offline using the program Across Lite.

Modems aside, this basic method has continued until now, and a variety of programs and apps have sprung up over the years that allow not only offline play, but with tailored feature sets, such as support for the visually impaired, puzzle fanatics, puzzle creators, team playing, etc. Naturally the NYT joined the party as well, offering the crossword puzzles online and via smart phone apps.

Continue reading “NYT Crossword Decision Puzzles Many” →

Hackaday Podcast 137: Maximum Power Point, Electric Car Hacking, Commodore Drive Confidential, And Tesla Handles

September 24, 2021 by Mike Szczys 3 Comments

Hackaday editors Mike Szczys and Elliot Williams marvel at a week packed full of great hardware hacks. Do you think the engineers who built the earliest home computers knew that their work would be dissected decades later for conference talks full of people hungry to learn the secret sauce? The only thing better than the actual engineering of the Commodore floppy drive is the care with which the ultimate hardware talk unpacks it all! We look upon a couple of EV hacks — one that replaces the inverter in a Leaf and the other details the design improvements to Telsa’s self-hiding door handles. Before we get to medieval surgery and USB-C power delivery, we stop for a look at a way to take snapshots of Game Boy gameplay and an electric plane engine that looks radial but is all gears.

Take a look at the links below if you want to follow along, and as always, tell us what you think about this episode in the comments!

Direct download (52 MB)

Continue reading “Hackaday Podcast 137: Maximum Power Point, Electric Car Hacking, Commodore Drive Confidential, And Tesla Handles” →

Captivating Clock Puts Endangered Displays On Display

September 24, 2021 by Ryan Flowers 18 Comments

The DT-1704A VFD is straight from the 1976 Radio Shack Catalog — The DT-1704 VFD as seen the 1976 Radio Shack Catalog. The “A” version has no substrate, making the VFD fully clear for added effect.

When you have a small stock of vacuum fluorescent displays (VFDs) straight out of the 1976 Radio Shack catalog, you might sit around wondering what to do with them. When [stepawayfromthegirls] found out that his stash of seven DT-1704A tubes may be the last in existence, there was no question. They must be displayed! [stepawayfromthegirls]’ mode of display is this captivating clock build. Four VFDs with their aqua colored elements are set against a black background in a bespoke wooden case. Looking under the hood, the beauty only increases.

VFD Clock Wiring is almost as stunning as the clock itself — VFD Clock Wiring is nearly as stunning as the clock itself.

Keeping the build organized was not an easy task because the tubes are designed in such a way that each segment must be individually controlled. The needed I/O duties are provided by an Arduino Mega 2560 Pro (Embed). 28 2n3904’s each with their two resistors serve as drivers for each VFD segment.

The output of a 24 V AC transformer left over from the 1980s is rectified to 34 V of DC power which is then regulated to 27 V to power the tubes. Switching power supplies provide 6 V to the Arduino and 1.3 V to the filaments. If you look closely, you’ll also see a GPS module so that the clock doesn’t need to be set. To future-proof the clock against daylight savings time adjustments, a potentiometer on the back of the case allows the user to set custom hour offsets without editing any code.

We think the end result is a remarkably clean, simple, and elegant clock that he will be proud of for many years to come!

If VFD clock builds are your thing, then you’ll enjoy this Network Attached VFD Clock and a Mini VFD Clock with floating display. And while not VFD based, we’d be silly to leave out the Boat Anchor Nixie Clock with enough knobs, switches, and buttons to delight even the fussiest of hacker.

This Week In Security: Somebody’s Watching, Microsoft + Linux, DDoS

September 24, 2021 by Jonathan Bennett 23 Comments

In case you needed yet another example of why your IoT devices shouldn’t be exposed to the internet, a large swath of Hikvision IP Cameras have a serious RCE vulnerability. CVE-2021-36260 was discovered by the firm Watchful_IP in the UK. In Hikvision’s disclosure, they refer to the problem as a command injection vulnerability in the device’s web interface. The vuln is pre-authentication, and requires no user interaction. This could be something as simple as a language chooser not sanitizing the inputs on the back-end, and being able to use backticks or a semicolon to trigger an arbitrary command.

Now you’re probably thinking, “I don’t use Hikvision cameras.” The sneaky truth is that a bunch of cameras with different brand names are actually Hikvision hardware, with their firmware based on the Hikvision SDK. The outstanding question about this particular vulnerability is whether it’s present in any of the re-labelled cameras. Since the exact vulnerability has yet to be disclosed, it’s hard to know for sure whether the relabeled units are vulnerable. But if we were betting… Continue reading “This Week In Security: Somebody’s Watching, Microsoft + Linux, DDoS” →

[Look Mum No Computer] sits inside his new museum of obsolete technology and synth oddities.

This (Obsolete Technology) Museum Is (Not) Obsolete

September 24, 2021 by Kristina Panos 11 Comments

You know, we’re not sure how this escaped our attention for so long. Blame it on the summer heat. Did you know that [Look Mum No Computer] opened a museum of obsolete technology a few weeks ago?

This Museum is (Not) Obsolete is located by the seaside in the Ramsgate section of Kent, England, where you’ll also find the Micro Museum, a collection of computing and video game history. [LMNK] says it took 10 months to build the museum, which is a maze of vintage delights including decades of computers and computer accessories, signal generators, VFDs, vacuum tubes, old phone equipment, and 50 years’ worth of 150-in-one electronics kits. This list doesn’t even sort of start to scratch the surface.

Around every turn there are forgotten technological gems and never-heard-ofs, plus the space is peppered with [LMNK]’s own superb synth creations. (Who could forget the Furby Organ?) The goal is to make it as interactive as possible, and to keep growing the collection. So far, [LMNK] has welcomed visitors of all backgrounds and ages, which is exactly what he was after. Can’t quite make it to Ramsgate? Us either. Do what we did and take the video tour below.

If you can get there, you might want to check out the National Museum of Computing, too.

Continue reading “This (Obsolete Technology) Museum Is (Not) Obsolete” →

Handheld Bot Takes The Tedium Out Of Guitar Tuning

September 24, 2021 by Dan Maloney 13 Comments

Even with fancy smartphone apps and custom-built tuners, tuning a guitar can be a tedious process, especially for the beginner. Pluck a string, figure out if the note is sharp or flat, tighten or loosen accordingly, repeat. Then do the same thing for all six strings. It’s no wonder some people never get very far with the guitar.

Luckily, technology can come to the rescue in the form of this handy open-source automatic guitar tuner by [Guyrandy Jean-Gilles]. The tuner has a Raspberry Pi Pico inside, with a microphone attached to the ADC. The program running on the Pico listens for the sound of a plucked string and determines whether the note is sharp or flat. The Pico then drives a small DC gear motor in the appropriate direction, which turns the peg the right way to bring the string into tune. The tuner makes ample use of 3D-printed parts, STLs for which are included in the project repo. [Guyrandy] has also made some updates to the project to make the tuner a little easier to use.

While there’s an affordable commercial version of this — upon which [Guyrandy] based his design — we really like the fact that he rolled his own here, and made the design freely accessible to everyone. We also like the idea that guitarists who can’t use tuners requiring visual feedback can use this, too — just like this one.

[via r/raspberry_pi]

The Most Important Device In The Universe on display at Modern Props

The Most Important Device In The Universe Is Powered By A 555 Timer

September 23, 2021 by Ryan Flowers 45 Comments

The Hackaday comments section has become infamous for a recurring theme that goes something like “I don’t know why they used an Arduino, they could have done it with a 555 timer!” If you’ve ever thought the same way, then this post is for you!

What is The Most Important Device In The Universe, then? It’s the Modern Props #195-290-1, a movie prop originally built in the 1970’s. It’s a product of the creative mind of [John Zabrucky] who founded Modern Props in 1977 to serve Sci-Fi television and movie productions that wanted to invent the future with their props. Known for their high quality and impeccable craftsmanship, Modern Props’ products were in demand until the day they closed the doors so that [John] could retire.

This particular piece is called The Most Important Device In The Universe due to its ubiquity in modern productions that we’ve all heard of: several Star Trek franchises, The Last Starfighter, Knight Rider, Airplane II, Austin Powers, and countless others. The next time you sit down to watch a Sci-Fi show, see if you can spot it! Be sure to check the video below the break to see several examples.

Nobody is sure what The Most Important Device does, aside from the fact that it has red lights that go back and forth. What we do know, thanks to a comment by the man who installed the electronics, [Gene Turnbow], is how it’s powered. [Gene] explained that 45w NPN power transistors drive the neon tubes through step up transformers. The transistors themselves are connected to a 74C4514 demultiplexer, which is itself driven by a 7493 binary counter. What’s the 7493 driven by? You guessed it: the venerable 555 Timer. And so it is that the 555 timer runs The Most Important Device In The Universe.

We did think that [Gene]’s final comment was rather indicative of how much things have changed since the prop was originally built. After explaining the device, he says “These days we would just use an Arduino to do the same job.” Indeed.

Don’t worry, 555 lovers. We’ve got you covered with this Vacuum Tube 555, and and the Trollduino, a 555 on an Arduino Shield. Thanks [Matt K] for the great tip. Don’t forget to submit your favorite hacks to our Tip Line!

Continue reading “The Most Important Device In The Universe Is Powered By A 555 Timer” →