Author: James Hobson

1404 Articles

Incredible Luminosity In A Portable Package

July 7, 2016 by 25 Comments

If you’ve ever wanted to bring the brightest day into the blackest night, this flashlight shall give you sight. With a 100W LED array powered by up to 32V, this thing is exceedingly bright — it clocks in at about 9000 lumens! But the best part is that all every little detail of the build was documented along the way so that we can tag along for the ride.

The all-aluminium case houses the LEDs and their heat sink, voltage regulator and display, the AD and DC adapter and converter boards and their connectors, and fans to ensure adequate ventilation. It’s powered by a custom-assembled 6400 mAh 11.1V lipo battery or DC 20V 10Amp power supply via XLR for rugged, locking connection. The battery pack connection was vacuum formed for quick-swapping, and the pack itself will sound off an alert if any of the three batteries inside the pack run out of power. A nifty added feature is the ability to check the remaining charge — especially useful if you’re looking to bring this uncommonly powerful flashlight along on camping trips or other excursions.

Continue reading “Incredible Luminosity In A Portable Package” →

Cheap And Effective Dune Buggy Wheel Chair

July 6, 2016 by 15 Comments

[masterfoo]’s mother-in-law suffers from a bad hip which would have sidelined her participation in the Fourth of July festivities. As a testament to the power of family and ingenuity, [masterfoo] built her a beach-capable wheel chair to give her some off-roading capability.

The frame is built out of 1.5″ PVC piping and the tires are 20×8-8″ inner tubes for ride-on lawnmowers. The lawnmower  wheel inner tubes were cost-effective and fit the purpose, saving the need for the more expensive purpose-built-for-the-beach Wheeleez tires. They also have a fluid inside that plugs small punctures which will come in handy against he beach’s small cacti and other flora. This video was their guide for the foam insulation and plywood wheel assembly, also employing the handy man’s secret weapon to protect the tube from the rim’s plywood edge. Check it out in action!

Continue reading “Cheap And Effective Dune Buggy Wheel Chair” →

Raspberry Pi Zero Becomes Mighty Miniature Minecraft Machine

July 2, 2016 by 21 Comments

In a clever bit of  miniaturization, [JediJeremy] has nearly completed a gyro-mouse controller for a Raspberry Pi Zero! Ultimately this will be a wearable Linux-watch but along the way he had some fun with the interface.

Using the MPU6040 gyroscope/accelerometer card from a quadcopter, [JediJeremy] spent a week writing the driver to allow it to function as a mouse. Strapping an Adafruit 1.5″ PAL/NTSC LCD screen and its driver board to the Zero with rubber bands makes this one of the smallest functional computer and screen combos we’ve seen. Simply tilt the whole thing about to direct the cursor.

It presently lacks any keyboard input, and [JediJeremy] has only added a single button for clicking, but look at this thing! It’s so tiny! In his own words: “I think this is the first computer that I can accidentally spill into my coffee, rather than vice versa.”

Continue reading “Raspberry Pi Zero Becomes Mighty Miniature Minecraft Machine” →

SpotMini Struts Its Stuff

July 1, 2016 by 17 Comments

Boston Dynamics, the lauded robotics company famed for its ‘Big Dog’ robot and other machines which push mechanical dexterity to impressive limits have produced a smaller version of their ‘Spot’ robot dubbed ‘SpotMini’.

A lightweight at 55-65 lbs, this quiet, all-electric robot lasts 90 minutes on a full charge and boasts partial autonomy — notably in navigation thanks to proprioception sensors in the limbs. SpotMini’s most striking features are its sleek new profile and manipulator arm, showing off this huge upgrade by loading a glass into a dishwasher and taking out some recycling.

Robots are prone to failure, however, so it’s good to know that our future overlords are just as susceptible to slipping on banana peels as we humans are.

Continue reading “SpotMini Struts Its Stuff” →

The Citadel Is The King Of K’nex Builds.

June 29, 2016 by 18 Comments

Following one’s passion can lead to amazing results. Sometimes this results in technological marvels; other times, one marvels at the use of the technology. An exemplary display of the latter is The Citadel.

Over the course of three years, redditor [Shadowman39] pieced together this monstrous K’nex structure. With over 17 different paths(!), 45 different elements, and over 40,000 parts, you would expect some meticulous planning to go into its construction — but that’s not the case! [Shadowman39] assembled it largely on the fly with only a few elements needing to be sketched out and only the main elevator proving to be troublesome. Three motors power the structure — one for the main elevator, one for the smaller lifts on the bottom, and one for the release gates.

This is an absolute leviathan hobby project. To satiate the obvious curiosity of anyone who stumbles across this picture, its intricacies can be seen in the video:

Continue reading “The Citadel Is The King Of K’nex Builds.” →

Bright Idea For A Name Tag

June 27, 2016 by 16 Comments

Looking for a quick DIY project to separate yourself from the crowd at your next business function or maker expo? Take a leaf out of [Pete Prodoehl’s] book and make your own name tag complete with blinking LED!

Minimalist, yet flashy (sorry!), this quick project can be completed inside a few hours with few resources, and is a great way to display your DIY handiwork. Continue reading “Bright Idea For A Name Tag” →

A Fountain Of Superhydrophobic Art

June 24, 2016 by 29 Comments

Superhydrophobic coating finds a new application in art through [Arthur Carabott] in the form of a bizarre fountain.

A Master’s student in the Global Innovation Design course at the London Royal College of Art, [Carabott] achieved the effect by leaving parts of the laser-cut acrylic untouched by Rust-oleum’s NeverWet Multisurface coating. A 3d printed spigot mounted high above the surface imparts greater velocity to the impacting water so as it hits the acrylic the liquid forms into channels giving the impression of something surreal. Indeed — his design is inspired by the optical illusions of Japanese mathematician Kokichi Sugihara which attempt to realize the impossible artwork of M.C. Escher. The effect is worthy of a double take.

Continue reading “A Fountain Of Superhydrophobic Art” →