Coils In The Road Could Charge EVs While Driving

August 17, 2022 by 131 Comments

One of the primary issues with EVs is that you need to pull over and stop to get a charge. If there isn’t a high-speed DC charger available, this can mean waiting for hours while your battery tops up.

It’s been the major bugbear of electric vehicles since they started hitting the road in real numbers. However, a new wireless charging setup could allow you to juice up on the go.

Electric Highways

Over the years, many proposals have been made to power or charge electric vehicles as they drive down the road. Many are similar to the way we commonly charge phones these days, using inductive power transfer via magnetic coils. The theory is simple. Power is delivered to coils in the roadway, and then picked up via induction by a coil on the moving vehicle.

Taking these ideas from concept into reality is difficult, though. When it comes to charging an electric vehicle, huge power levels are required, in the range of tens to hundreds of kilowatts. And, while a phone can sit neatly on top of a charging pad, EVs typically require a fair bit of ground clearance for safely navigating the road. Plus, since cars move at quite a rapid pace, an inductive charging system that could handle this dynamic condition would require huge numbers of coils buried repeatedly into the road bed. Continue reading “Coils In The Road Could Charge EVs While Driving” →

Did You See A John Deere Tractor Cracked At DEF CON?

August 17, 2022 by 6 Comments

The Internet, or at least our corner of it,  has been abuzz over the last few days with the news of a DEF CON talk by [Sick.Codes] in which he demonstrated the jailbreaking of the console computer from a John Deere tractor. Sadly we are left to wait the lengthy time until the talk is made public, and for now the most substantive information we have comes from a couple of Tweets. The first comes from [Sick.Codes] himself and shows a game of DOOM with a suitably agricultural theme, while the second is by [Kyle Wiens] and reveals the tractor underpinnings relying on outdated and un-patched operating systems.

You might ask why this is important and more than just another “Will it run DOOM” moment. The answer will probably be clear to long-term readers, and is that Deere have become the poster child for improper use of DRM to lock owners into their servicing and deny farmers the right to repair. Thus any breaches in their armor are of great interest, because they have the potential to free farmers world-wide from this unjust situation. As we’ve reported before the efforts to circumvent this have relied on cracked versions of the programming software, so this potential jailbreak of the tractor itself could represent a new avenue.

As far as we’re aware, this has so far taken place on the console modules in the lab and not in the field on a real tractor. So we’re unsure as to whether the door has been opened into the tractor’s brain, or merely into its interface. But the knowledge of which outdated software can be found on the devices will we hope lead further to what known vulnerabilities may be present, and in turn to greater insights into the machinery.

Were you in the audience at DEF CON for this talk? We’d be curious to know more. Meanwhile the Tweet is embedded below the break, for a little bit of agricultural DOOM action.

Continue reading “Did You See A John Deere Tractor Cracked At DEF CON?” →

Motorized Camera Mount Was Once A 3D Printer

August 17, 2022 by 1 Comment

If you plan on building your own motorized camera mount, a 3D printer can definitely be of help. But in this case, [dslrdiy] didn’t use it for printing out parts — finding himself with little use for an old printer built from scrap back in the day, he decided to repurpose it and turn it into a remote controlled DSLR camera mount that’s capable of panning, tilting, and sliding.

The main goal was to not only salvage the stepper motors and controller board, in this case an Arduino Mega 2560 with RAMPS board, but also to keep the original firmware itself in use. For this to work, [dslrdiy] redesigned the mechanical parts that would allow him to perform the different camera movements using regular G-Code instructions operating the X, Y, and Z axes to pan, tilt, and slide respectively.

The G-Code instructions themselves are sent via UART by an accompanying control box housing an ESP32. This allows the camera mount to operated by either via joystick and buttons, or via serial Bluetooth connection, for example from a phone. The ESP32 system also allows to set predefined positions to move to, along with speed and other motor tweaks. You can see it all demonstrated in the video after the break.

While there’s simpler solutions for camera mounts out there, this is certainly an interesting approach. It also shows just how far desktop 3D printers have come if we already find the older generations repurposed like this. For more of [dslrdiy]’s work with 3D printers and cameras, check out his customizable lens caps.

Continue reading “Motorized Camera Mount Was Once A 3D Printer” →

USB-C Charging Mod Brings In The Juice

August 16, 2022 by 13 Comments

By now we’re well under way with the consolidation of low-voltage power supplies under the USB-C standard, and the small reversible connector has become the de facto way to squirt some volts into our projects. But for all this standardization there are still a few places where the harmony of a unified connector breaks down, and things don’t work quite the way they are supposed to. One such case has occupied [James Ide] — devices which will accept power from a USB-A to USB-C cable, but not from a USB-C to USB-C one. His solution? A small flexible PCB upgrade.

The problem lies with how different power supplies and peripherals identify each other, and quite likely in device manufacturers skimping on a few components here and there. A compliant USB-C power supply expects to see pull-down resistors on the data lines, and will thus refuse to serve power to devices that don’t possess them. Meanwhile the USB-A supply will quite happily serve juice without such checks, which is what the manufacturer is relying on. The solution is a tiny flexible PCB with the resistors, designed to be retrofitted behind a USB-C socket. On one hand it’s probably one of the simplest circuits we’ve ever shown you, and on the other it’s a cleverly designed solution to the issue at hand.

If the nitty-gritty of USB-C interests you, then we’ve taken a much closer look in the past.

Thanks to [Andrea] for the tip.

SquareBoi Is The DIY Game Boy Cart You’ve Always Wanted

August 16, 2022 by 16 Comments

Running unofficial code on a Nintendo Game Boy has long been a solved problem. However, you still need a way to get that code onto the handheld console. The Squareboi cartridge promises to do just that, as created by [ALXCO-Hardware].

It’s a well-featured cartridge, with up to 4 MB of ROM storage onboard. It also features a ferromagnetic RAM part for savegame storage, which doesn’t need a battery to hang on to your precious data. It’s designed to be compatible with the vast majority of Game Boy and Game Boy Color games, with efforts made to support the most common mapping schemes. It can be built using entirely through-hole components, and is readily programmable via an Arduino.

For those eager to tinker with code on the Game Boy, diving into the Squareboi is a great way to get closer to the bare metal and understand what’s really going on at the low level. Those interested in building their own can get all the relevant details over on Github.

We’ve seen similar hacks before, too, like the cartridge that brought Wikipedia to the humble Nintendo handheld. If you’ve been whipping up your own Nintendo hacks, be sure to drop us a line!

Halloween Mirror Offers A Mighty Fright

August 16, 2022 by 22 Comments

Jump scares are controversial in the horror world, whether you’re talking about movies or video games. You can bring that same irritating thrill into real life, too, with this Halloween mirror from [jasonwinfieldnz].

During the day, or simply when it’s bright inside, the mirror appears normal, like any other. However, behind the special two-way mirrored glass surface is a spooky 3D print, such as a skull or an annoying yellow cartoon character. When the lighting level gets low, everything changes. A light-dependent resistor hooked up to a Digispark detects the change, and then fires up some 5V LEDs to light the scary image, revealing it behind the mirror. Even better, it plays a loud screaming sound with the help of a DFplayer MP3 module.

We’d love to see the concept taken even further, too. It would be quite something if, when a passer-by approached, the room lights suddenly cut out and the mirror activated in its full glory.

We’ve seen some great Halloween builds over the years. If you’re eager to get one out this season, you might wanna get hacking now! Video after the break.

Continue reading “Halloween Mirror Offers A Mighty Fright” →

Revamping The Camping Trailer With More Power

August 16, 2022 by 13 Comments

Pulling a trailer behind your bike has an aspect of freedom and exploration to it. However, the reality is that pulling a large, heavy box behind your bike is incredibly draining physically. So [Drew] returned to the drawing board for his bike camper and added a motor, making some tweaks along the way.

We covered his first attempt at a bike trailer; this update encompasses everything he mentioned as future improvements. First, he strengthened the axle, and the trailer mount bolted straight into the chainstay arm for added strength. Then he built a custom battery pack out of 18650 cells clocked in at just under 3kw. Next, he installed a hub motor kit into the bike’s back wheel. Finally, a flexible 100W PV solar panel was added to the roof and routed to a small battery bank inside that provides USB and a few AC outlets for laptops and phones while camping. [Drew] does note that he could charge the big e-bike battery with the smaller bank, but since the e-bike battery is much larger than the small one, it would take a few cycles.

[Drew] takes a journey to a music festival and is happy to report better stability and the battery having fantastic range even without him pedaling. We love seeing a good project revisited, and we hope [Drew] gets some good use out of his camper. Video after the break.

Continue reading “Revamping The Camping Trailer With More Power” →