Inca Knots Inspire Quantum Computer

July 28, 2022 by 19 Comments

We think of data storage as a modern problem, but even ancient civilizations kept records. While much of the world used stone tablets or other media that didn’t survive the centuries, the Incas used something called quipu which encoded numeric data in strings using knots. Now the ancient system of recording numbers has inspired a new way to encode qubits in a quantum computer.

With quipu, knots in a string represent a number. By analogy, a conventional qubit would be as if you used a string to form a 0 or 1 shape on a tabletop. A breeze or other “noise” would easily disturb your equation. But knots stay tied even if you pick the strings up and move them around. The new qubits are the same, encoding data in the topology of the material.

Continue reading “Inca Knots Inspire Quantum Computer” →

Foam Cutter Moves Like A Hot Knife Through Butter

July 28, 2022 by 13 Comments

Make enough attempts to cut foam using whatever you’ve got — utility knife, hacksaw, serrated plastic knife — and you’ll wish hard for something that cuts cleaner, faster, and better. While there are all sorts of ways to build a hot wire foam cutter, this design from [jasonwinfieldnz] is both interesting and imitable.

If you don’t already know it, nichrome wire is nifty stuff that’s readily available in thrift store hair dryers and toasters. It stretches as it heats up, and shrinks as it cools back down.

The interesting part of this build is that instead of using a spring to keep tension on the nichrome wire, [jasonwinfieldnz] designed and 3D-printed a bow out of PLA that does the job elegantly. While [jason] was initially concerned that the bow might possibly melt, he found in practice that although the bow does get warm to the touch, it’s nowhere near hot enough to even warp.

One nice touch is the simple fence that rides along two slots and secures with wingnuts. We also like that [jason] made this foam cutter largely from scrap material, and rather than buy a spool of nichrome, he opted for a skinny heating element and pillaging the wire.

If you’re a nichrome noob, know that it doesn’t take much juice to do the job. Even though a computer power supply is what [jason] had lying around, it’s complete overkill, so you would definitely want to limit the current. Check out the build video after the break.

Still not portable enough for you? All you really need is a 18650, some nichrome, and a few bits and bobs to hold it all together.

Continue reading “Foam Cutter Moves Like A Hot Knife Through Butter” →

A Customizable Macropad To Make Anyone’s Tail Wag

July 28, 2022 by 4 Comments

[Gili Yankovitch] has always wanted some kind of macro keypad for all those boss-slaying combos he keeps up the sleeve of his wizard robe while playing WoW. Seventeen years later, he finally threw down the gauntlet and built one. But really, this is an understatement, because Paws is kind of the customizable macropad to end all customizable macropads.

This thing is completely bespoke, and yet cookie cutter at the same time — but we mean that in the best possible way. Paws can be made in any shape or form, and quite easily. How is this even possible, you ask? Well, every single key has its own microcontroller.

Yep, each key has an ATtiny85 and a cute little ribbon cable, and these form a token ring network that talks to an Arduino, which provides the keyboard interface to the computer. To make things even easier, [Gili] built a simple programming UI that automatically recognizes the configuration and number of keys, and lets the user choose the most important bit of all — the color of the LED.

[Gili] wanted to combine all the skills he’s learned since the worst timeline started in early 2020 — embedded software, CAD, electronics, and PCB design. We’d like to add networking to that list, especially since he figured out a nice workaround for the slowness of I²C and the limitations of communication between the ‘tiny85s and the Arduino. Though [Gili] may have started out with a tall order, he definitely filled it. Want to get your paws on the design files? Just claw your way over to GitHub.

If your customization interests lie more toward what program is in focus, be sure to check out Keybon, which was one of the many awesome winners of our Odd Inputs and Peculiar Peripherals contest.

Hackaday Prize 2022: A Functional Commodore PET Tribute

July 28, 2022 by 14 Comments

The C64 may be the best-selling computer of all time, but Commodore made several machines before that, too. [Mjnurney] always loved the Commodore PET, and set about building some new machines in the PET’s unique all-in-one form factor.

The case design started with measurements taken from an original Commodore PET, of which [Mjnurney] has three. Then, it was modified and extended to make room for a proper keyboard. The case also mounts a 14″ IPS display, two 15W speakers, and a gas strut enabling the case to be propped open for easy maintenance. It’s actually made out of real sheet metal, too!

The primary version mounts an Amiga 500 inside, including its classic keyboard. However, [Mjnurney] has developed a PC version, too. Both look great, and it’s wild to see Netflix displayed on a machine that looks more at home in 1977. Perhaps most of all, though, we love the dual floppy drives just below the screen.

Throwback cases pay tribute to some of our favorite machines. The tiny ones are perhaps the cutest of all.

Continue reading “Hackaday Prize 2022: A Functional Commodore PET Tribute” →

Where Pollution Hits The Road: The Growing Environmental Hazard Of Rubber Tires

July 28, 2022 by 110 Comments

As ubiquitous as rubber tires are due to the many practical benefits they offer to cars, trucks, and other conveyances, they do come with a limited lifespan. Over time, the part of the tire that contacts the road surface wears away, until a tire replacement is necessitated. Perhaps unsurprisingly, the material that wears away does not magically vanish, but ends up in the environment.

Because of the materials used to create tires, this worn away material is counted as a microplastic, which is a known environmental pollutant. In addition, more recently it’s been found that one additive commonly found in tires, called 6PPD, is highly toxic to certain species of fish and other marine life.

There are also indications that these fine bits of worn-off tire contribute to PM2.5 particulate matter. This size of particulates is fine enough to penetrate deep into the lungs of humans and other animals, where they can cause health issues and exacerbate COPD and similar conditions. These discoveries raise a lot of questions about our use of tires, along with the question of whether electric vehicles stand to make this issue even worse.

Continue reading “Where Pollution Hits The Road: The Growing Environmental Hazard Of Rubber Tires” →

Your Own Engineering Workstation, With Mame

July 28, 2022 by 19 Comments

There are some things that leave indelible impressions in your memory. One of those things, for me, was a technical presentation in 1980 I attended — by calling in a lot of favors — a presentation by HP at what is now the Stennis Space Center. I was a student and it took a few phone calls to wrangle an invite but I wound up in a state-of-the-art conference room with a bunch of NASA engineers watching HP tell us about all their latest and greatest. Not that I could afford any of it, mind you. What really caught my imagination that day was the HP9845C, a color graphics computer with a roughly $40,000 price tag. That was twice the average US salary for 1980. Now, of course, you have a much better computer — or, rather, you probably have several much better computers including your phone. But if you want to relive those days, you can actually recreate the HP9845C’s 1980-vintage graphics glory using, of all things, a game emulator.

The Machine

The HP9845C with a Colorful Soft Key Display

Keep in mind that the IBM PC was nearly two years away at this point and, even then, wouldn’t hold a candle to the HP9845C. Like many machines of its era, it ran BASIC natively — in fact, it used special microcode to run BASIC programs relatively quickly on its 16-bit 5.7 MHz CPU. The 560 x 455 pixel graphics system had its own CPU and you could max it out with a decadent 1.5 MB of RAM. (But not, alas, for $40,000 which got you — I think –128K or so.)

The widespread use of the computer mouse was still in the future, so the HP had that wonderful light pen. Mass storage was also no problem — there was a 217 kB tape drive and while earlier models had a second drive and a thermal printer optional, these were included in the color “C” model. Like HP calculators, you could slot in different ROMs for different purposes. There were other options such as a digitizer and even floppy discs.

Continue reading “Your Own Engineering Workstation, With Mame” →