A Tabletop Star Wars Themed Lego Racer Game

March 4, 2018 by 13 Comments

When it comes to the title of undisputed king of the toy construction kit world, the Danes have it. Lego are ubiquitous in the toybox, and parents worldwide know the joy of stepping barefoot on a stray brick. Aside from the themed sets for youngsters and collectors, we see a lot of Lego in projects that make it to these pages. Sometimes they are from hardware hackers who’ve chosen Lego because they had some to hand or because of its utility, but at other times they come from the Lego community rather than the wider one.

Take the Star Racer from [Alexis Dos Santos] as an example of the former. It’s a table top racing game made entirely from Lego, and with control courtesy of Lego Mindstorms. It’s a real rolling road game, with a track made from five continuous belts of grey Lego sections, with obstacles attached to them. The Podracer slides from side to side at the front under user control, and the object is to avoid them as they come towards you at varying speed.

It’s a beautiful piece of work, and as well as the linked Flickr photographs it can be seen in the YouTube video below the break. The sticker says it’s a highly addictive game, and we’d be inclined not to disagree.

Continue reading “A Tabletop Star Wars Themed Lego Racer Game” →

Star Wars Speeder’s Finishing Touch: Mirrors

November 8, 2017 by 19 Comments

[Super 73] make electric scooters, and they made some Star Wars Speeder Bikes with a twist for Halloween; adding some mirrored panels around the bottoms of the bikes made for a decent visual effect that requires no upkeep or fancy workings. Having amazed everyone with the bikes, they followed them up with a video of the build process.

The speeders are shells built around their Super 73 electric scooter, with bases of what looks like MDF sitting on anchor points. Onto the base platforms goes cardboard and expanding foam to create the correct shapes, which are then sanded then coated in fiberglass and bondo. Then it’s time for paint, weathering, and all the assorted bits and pieces needed to make the speeders as screen-accurate as possible. The real finishing touch are the mirrored panels to conceal the wheels and create a levitation illusion. As long as the mirrors are angled so that they reflect the pavement when viewed by a pedestrian, it works fairly well.

Top it off with costumes and a ride around town (with plenty of cameras of course, they naturally wanted to grab some eyeballs) and we have to say, the end result looks nifty. Both the showcase and making-of videos are embedded below.

Continue reading “Star Wars Speeder’s Finishing Touch: Mirrors” →

Speed Run [James Bruton’s] Star Wars Builds

December 10, 2016 by 4 Comments

We’ve been following [James Bruton]’s builds here on Hackaday for quite a while and he has built some impressive stuff. We love how he often doesn’t cover everything up, leaving enough room to admire the working bits under the hood. Just in time for the release of the new Star Wars movie, Rogue One, [James] put together an overview of his Star Wars robot builds.

The build summary includes his R6 droid, his GNK walking droid and the third revision of his BB-8 droid. [James Bruton]’s videos have tons of detail in them over many, many parts (for example, his BB-8 R3 playlist is 15 parts and his Ultron build currently has 26 episodes and counting!)

There’s a quick overview of each of the three robot builds in this video, and it includes links to the playlists for each build for those who want more detail. This is just what you need to glimpse all of the clever design that went into these wonderfully crafted droids. And if you haven’t seen it yet, you should check out his series elastic actuators that he’s working on for the Ultron build, they give a robot some relief from rigidity.

Continue reading “Speed Run [James Bruton’s] Star Wars Builds” →

Drones, Clever Hacks, And CG Come Together For Star Wars Fan Film

August 11, 2016 by 12 Comments

We weren’t certain if this Star Wars fan film was out kind of thing until we saw the making of video afterwards. They wanted to film a traditional scene in a new way. The idea was to take some really good quadcopter pilots, give them some custom quadcopters, have them re-enact a battle in a scenic location, and then use some movie magic to bring it all together.

The quadcopters themselves are some of those high performance racing quadcopters with 4K video cameras attached. The kind of thing that has the power to weight ratio of a rocket ship. Despite what the video implies, they are unfortunately not TIE Fighter shaped. After a day of flying and a few long hikes to retrieve the expensive devices after inevitable crashes (which, fortunately, provided some nice footage), the next step was compositing.

However, how to trick the viewer into believing they were in a X-Wing quadcopter? A cheap way to do it would be to spend endless hours motion tracking and rendering a cockpit in place. It won’t look quite real. The solution they came up with is kind of dumb and kind-of brilliant. Mount a 3D printed cockpit on a 2×4 with a GoPro. Play the flight footage on a smartphone while holding the contraption. Try to move the cockpit in the same direction as the flight. We’re not certain if it was a requirement to also make whooshing and pew pew laser noises while doing so, but it couldn’t hurt.

In the end it all came together to make a goofy, yet convincingly good fan film. Nice work! Videos after the break.

Continue reading “Drones, Clever Hacks, And CG Come Together For Star Wars Fan Film” →

Red Carpet BB-8 internals

How BB-8 Works Revealed At Star Wars Celebration Europe

July 20, 2016 by 18 Comments

Finally the workings of the official BB-8 that you’ve seen rolling around at various events have been revealed. Its makers [Matt Denton] and [Josh Lee] participated in an hour-long presentation at Star Wars Celebration Europe 2016 just this past week where the various views of its internals were shown in action. It’s since had BB-8 builders (yours truly included) analyzing the workings for new ideas. We also now have the official name for it, red carpet BB-8.

For the first half of their talk they went over how BB-8 was implemented for Star Wars: The Force Awakens. As we’ve long known this was done using 7 puppeted BB-8’s, though it was revealed that only 4 were actually used, including a stationary one called the wiggler whose purpose you can guess. Another thing we didn’t know is that they did consider building a working BB-8 for filming but decided they needed something bullet proof, that would work right every time without making a film crew wait for repairs, and so went with the puppets instead.

The second half of their talk contained the big reveal, the mechanism inside red carpet BB-8’s ball. It turns out to be pretty close to what many builders have been doing. If you’ve seen the DIYer’s guide to the different BB-8 drive systems then you’ll understand when we say it’s a pendulum drive (aka axle drive). That is, there’s a motorized axle that crosses the middle of the ball and the ball rotates on that axle. Meanwhile a large mass suspended below the axle acts as the pendulum mass.

Red Carpet BB-8 side with cables
Red Carpet BB-8 side with actuator

BB-8 builders have known the importance of keeping as much mass as possible as low down as possible for stability, but it was revealed the great extent to which that has been done in the red carpet version. Motors for the head’s pitch and yaw are located at the bottom and their motion is transferred up to the center using what are maybe best known as bicycle brake cables. Another big reveal was a linear actuator for the body roll, tilting the center stuff with respect to the mass lower down. The actuator itself is located in the lower section. Also, BB-8 builders have been mounting the drive motors for rotating the ball with respect to the axle, in line with the axle. However, in red carpet BB-8 the motor is also at the bottom and its motion appears to be transferred up to the axle via belt and worm gears. You may mistake the gold cylinders on either side of the central gimbal system to be motors but they’re actually Moflon slip rings.

Those are just a few of the insights gained so far from analyzing the video below. Doubtless people will be noticing a lot more in the weeks to come.

Continue reading “How BB-8 Works Revealed At Star Wars Celebration Europe” →

Full-size AT-ST Star Wars Build

April 4, 2016 by 30 Comments

Think you made a cool tree-house for your kids? Sorry to burst your bubble, but we don’t think anything can top this full-size 1:1 replica of a Star Wars AT-ST — complete with sound effects and moving turrets! Did we mention it seats two?

Built in his backyard, this AT-ST is constructed of wood, plastic, and sheet metal. On the inside it is decked out with joysticks, display panels, and other knobs and buttons for your imagination to go wild with. It even features solar panels on the roof to power two ventilation fans to keep you cool while daydreaming of blowing up Rebel scum on Hoth.

Stay tuned after the break to see a video of it in action.

Continue reading “Full-size AT-ST Star Wars Build” →

Star Wars Droid Translating Helmets

February 20, 2016 by 15 Comments

Now how’s this for an expo costume? [AEInnovations] put together a set of Droid helmets that talk to each other in droid speak!

Before you get too excited, we have to let you know, they aren’t actually translating anything. One, there’s no such thing as a complete droid speak language from Star Wars, and two, it’d be ridiculous. No, what he’s created is a bit simpler, but nonetheless awesome and very clever.

The helmets have walkie talkies built in, so two people wearing the helmets can simply talk to each other, in plain old English — well, or maybe Klingon. But when you speak, a sensor in the helmet notices you speaking, and starts broadcasting a randomized droid speech for everyone else to hear.

Continue reading “Star Wars Droid Translating Helmets” →