ChatGPT Powers A Different Kind Of Logic Analyzer

April 6, 2023 by 17 Comments

If you’re hoping that this AI-powered logic analyzer will help you quickly debug that wonky digital circuit on your bench with the magic of AI, we’re sorry to disappoint you. But if you’re in luck if you’re in the market for something to help you detect logical fallacies someone spouts in conversation. With the magic of AI, of course.

First, a quick review: logic fallacies are errors in reasoning that lead to the wrong conclusions from a set of observations. Enumerating the kinds of fallacies has become a bit of a cottage industry in this age of fake news and misinformation, to the extent that many of the common fallacies have catchy names like “Texas Sharpshooter” or “No True Scotsman”. Each fallacy has its own set of characteristics, and while it can be easy to pick some of them out, analyzing speech and finding them all is a tough job.

Continue reading “ChatGPT Powers A Different Kind Of Logic Analyzer” →

Fast Scanning Bed Leveling

April 6, 2023 by 29 Comments

The bane of 3D printing is what people commonly call bed leveling. The name is a bit of a misnomer since you aren’t actually getting the bed level but making the bed and the print head parallel. Many modern printers probe the bed at different points using their own nozzle, a contact probe, or a non-contact probe and develop a model of where the bed is at various points. It then moves the head up and down to maintain a constant distance between the head and the bed, so you don’t have to fix any irregularities. [YGK3D] shows off the Beacon surface scanner, which is technically a non-contact probe, to do this, but it is very different from the normal inductive or capacitive probes, as you can see in the video below. Unfortunately, we didn’t get to see it print because [YGK3D] mounted it too low to get the nozzle down on the bed. However, it did scan the bed, and you can learn a lot about how the device works in the video. If you want to see one actually printing, watch the second, very purple video from [Dre Duvenage].

Generally, the issues with probes are making them repeatable, able to sense the bed, and the speed of probing all the points on the bed. If your bed is relatively flat, you might get away with probing only 3 points so you can understand how the bed is tilted. That won’t help you if your bed has bumps and valleys or even just twists in it. So most people will probe a grid of points.

Continue reading “Fast Scanning Bed Leveling” →

Reviving A Legend: Mamiya RB67 Repair

April 6, 2023 by 26 Comments
The damaged parts in the camera are circled in red. Original graphic is from the Mamiya service manual.

When it comes to professional medium format analog cameras, the Mamiya RB67 is among the most well-known and loved, ever since its introduction in 1970. Featuring not only support for 120 and 220 film options, but also a folding and ‘chimney’ style view finder and a highly modular body, these are just some reasons that have made it into a popular – if costly – reflex system camera even today. This is one reason why [Anthony Kouttron] chose to purchase and attempt to repair a broken camera, in the hopes of not only saving a lot of money, but also to save one of those amazing cameras from the scrap heap. Continue reading “Reviving A Legend: Mamiya RB67 Repair” →

Even Amstrad Spectrums Need Their Bugs Fixing

April 6, 2023 by 2 Comments

The history of the Sinclair ZX Spectrum is one that mirrors the fortunes of the British home computer industry, one of an early 8-bit boom followed by a sharp decline as manufacturers failed to capitalise on the next generation of 16-bit machines. The grey ZX Spectrum on [Keri Szafir]’s bench is one that encapsulates that decline perfectly, being one of the first models produced under the ownership of Amstrad after Sir Clive’s company foundered. Amstrad made many improvements to the Spectrum, but as she demonstrates, there are still some fixes needed.

The machine came her way because of a hum from the tape deck circuitry. The read amplifier was picking up electrical noise, and she fixed it without mods to the circuit but with the simple expedient of powering the analogue circuit from the tape motor switch so it only works when needed.

Beyond that, this machine demonstrates another ’80s innovation, the SCART/Peritel AV connector. These first appeared on early-80s French TV sets, but by the later half of the decade had made it to the UK where Amstrad included support for an adapter cable from the DIN socket on the back of their Spectrum.  Even then they didn’t get it quite right, and she modifies some links on the board to better support it.

Sinclair were famous for on-board bodges, and even in new ownership continued. There’s a reversed transistor and at least one bodged-on component, but of course, it wouldn’t be a Spectrum without bugs, would it!

Continue reading “Even Amstrad Spectrums Need Their Bugs Fixing” →

Retrotechtacular: Voice Controlled Typewriter Science Project In 1958

April 6, 2023 by 17 Comments

Hackaday readers might know [Victor Scheinman] as the pioneer who built some of the first practical robot arms. But what was a kid like that doing in high school? Thanks to a film about the 1958 New York City Science Fair, we know he was building a voice-activated typewriter. Don’t believe it? Watch it yourself below, thanks to [David Hoffman].

Ok, we know. Voice typing is no big deal today, and, frankly, [Victor’s] attempt isn’t going to amaze anyone today. But think about it. It was 1958! All those boat anchor ham radios behind him aren’t antiques. That’s what radios looked like in 1958. Plus, the kid is 16 years old. We’d say he did pretty darn good!

Continue reading “Retrotechtacular: Voice Controlled Typewriter Science Project In 1958” →

Rock, paper, scissors game that uses servos to choose one at random for the computer.

Forget ChatGPT And Play Rock-Paper-Scissors With Yourself Instead

April 6, 2023 by 3 Comments

This isn’t like the cool AI everyone’s getting caught up with these days, but we’re sure it will make a fun party gimmick nonetheless.

The premise of [CrazyScience]’s game is really simple, with three servos connected to labels that display rock, paper, and scissors, respectively. The game code is written to pick a label to display at random. Furthermore, an ultrasonic distance sensor detects when the player has moved their hand close to the game, indicating the player has chosen a hand and is challenging the game. The result of the game is decided by the player, so we imagine you could pretend you never lost and no one would know.

It would be cool to see the game support multiple players, keep score, or make sure you can never win. And you’ll probably want to add the randomSeed function in the code too. But that seems like a version two problem.

The only thing left to do is add some AI since that’s all we’re doing nowadays. But maybe you’re the type to enjoy the simple 8-bit pleasures instead. If you ask us though, we’d rather play with friends.

Continue reading “Forget ChatGPT And Play Rock-Paper-Scissors With Yourself Instead” →

If They Fire The Nukes, Will They Even Work?

April 6, 2023 by 146 Comments

2022 was a harrowing year in a long line of harrowing years. A brutal war in Europe raised the prospect of nuclear war as the leaders behind the invasion rattled sabers and made thinly veiled threats to use weapons of mass destruction. And all this as we’re still working our way through the fallout of a global pandemic.

Those hot-headed threats raise an interesting question, however. Decades have passed since either Russia or the United States ran a live nuclear weapons test. Given that, would the nukes even work if they were fired in anger?

Continue reading “If They Fire The Nukes, Will They Even Work?” →