More OpenWRT Image Building For The Dockstar

October 4, 2010 by 11 Comments

[Der_picknicker] wrote in to let us know about a guide to building OpenWRT images for the dockstar (translated). What they end up with is a nice little network attached storage device that runs SAMBA and subversion under the umbrella of OpenWRT. We looked at flashing and building OpenWRT images for this device back in July. The development branch of OpenWRT hasn’t quite reached a stable release yet, but much has been done in the last few months.

The machine translation is a little rough, but the compilation process is easy enough to follow. If you don’t care to slog through compiling (which apparently takes 1-2 hours) they’ve also made their images available for download. It should be possible to flash via SSH but you might want to add a serial port to the device just to be safe.

$125 Off The Evalbot Is A Steal

October 4, 2010 by 518 Comments

When you see $125 off something you probably assume it cost several times that to start with. Nope, this drastic discount leaves just $25 plus shipping. Use coupon-code: 2JLP-R4XRT3 when ordering the little rover. There’s a quick video snippet of it embedded after the break.

What you’ll get is a Stellaris ARM Cortex-M3 microcontroller on a board with a bunch of goodies.

  • MicroSD slot
  • USB host and device connectors
  • I2C audio with speakers
  • Ethernet connector
  • 96×6 OLED display
  • Motors
  • Optosensors
  • Bump detectors

As always, we want to hear about the hacks you come up with once you have this little guy in hand.

[update, the code is now expired]

[final update — Someone from TI explains what is going on.]

—-  from the comments.

As some posts already note, the coupon code is only available to ESC Boston attendees. That said, we’re psyched about all of your interest and understand there seems to have been some confusion, so TI plans to fulfill all of the finalized orders to date. We’re working on some logistics in getting the code up and running again for ESC Boston attendees, but proof of ESC registration will be required. Stay tuned.

We hear you about the e-store and are working as quickly as possible to avoid issues in the future. Thanks for your patience.

Bottom line – we’re glad to see the excitement around EVALBOT and look forward to checking out your projects! We encourage you to share them on our e2e Forums at http://e2e.ti.com/

-Jean Anne Booth, Texas Instruments

——-

Continue reading “$125 Off The Evalbot Is A Steal” →

Wood Burning House Heater

October 4, 2010 by 59 Comments

Dabbling in alternative heating technology, [Rob Steves] built a wood stove to dispose of his scrap wood while negating his home’s fire insurance at the same time. As the leftover bits from his wood projects started to stack up he wondered how he would dispose of them. Burning the bits for heat means he’s using every last bit of the lumber. The internal tank from an electric water heater was repurposed as a combustion chamber, with exhaust gases escaping through some high-temperature flexible tubing. The glass panes were removed from one of the fireplace doors to give the off-gases a place to go. The result is a rocket stove that burns very hot and does a great job of warming his house.

It’s not the safest way to heat a home, and there may be coding issues with your municipality. But this might go well in a remote location, like that cabin where you have to generate your own electricity.

[Thanks HybridBlue]

Electronic Dice, Overkill And Simplified

October 4, 2010 by 17 Comments

[littlebird] posted a tutorial on making electronic dice.  He’s using an ATmega328 for the numbers work, and a mercury switch to activate it all. A nice blue enclosure to match the blue LEDs he’s using for the number display wraps it up nicely. Of course, someone had to mention that this was an amazing amount of over kill and it could just be done with a 555 timer like they used to do “back in the day”. [littlebird] responded with another tutorial to prove that he hadn’t forgotten how to work with the basics. He goes on to point out, now that we see both in action, that he can expand his microcontroller based one quickly with a few lines of code, where every new feature added to the 555 timer version would require additional components.

You can catch videos of both after the break.

Continue reading “Electronic Dice, Overkill And Simplified” →

IR Receiver As USB Keyboard

October 4, 2010 by 12 Comments

[Arthur] built an IR receiver to use with XBMC. Because it’s software specific he identifies the device on USB as a keyboard, and passes the IR commands as keystrokes used by the popular media platform.

Normally, homebrew IR receivers would use LIRC, the Linux Infrared Remote Control software. But this method doesn’t require you to have that running. In fact, it doesn’t need any setup on the PC end of things. Any remote that uses the Sony SIRC protocol will work off the bat.

[Arthur] chose a PIC 18f2550 for the project. It is a popular microcontroller because it has built-in USB handling. We’re a bit skeptical of the hardware design though. We didn’t see specifically which IR receiver he’s using, but many require some type of filtering so check the suggested layout in the datasheet for your module.

Hackaday Links: October 3, 2010

October 3, 2010 by 32 Comments

Sugar rocket

We’re told that this rocket is sugar powered. It’s quite a bit bigger than the homemade sugar motors we saw last week and it makes for quite a show. [Thanks Estqwerty]

Wooden PC construction

The finished look of this wooden PC case seems very familiar to us but we’re not sure we’ve seen pictures of the build process(updated link, sorry [Jeff]) before. There’s something extremely satisfying about how well its creator works with a file. [Thanks Anders]

Working on top

We never realized that this job existed, but if you repair communication towers it’s a heck of a climb to work. The video of a two-man crew climbing a 1600 foot tower is one of the most interesting we’ve seen this year. [via Blogging Protagonist]

Lego typing machine

[Dougal’s] typing machine types his name… over and over again. An interesting little piece of mechanical engineering, we’d have to think for a while to decide the best use for this little guy. [Thanks Chris]

Typing on a different type of keyboard

Here’s another typing machine but this time it’s not a keyboard and not purely mechanical. Pictured is one of the performers in an old equipment ensemble performing with whining stepper motors, speech synthesis, an other antiquated noise-makers. [Thanks Mike]


Millennium Falcon Doll House

October 3, 2010 by 19 Comments

Sometimes all it takes is one idea. The shape of a cutting board found at a thrift store prompted [Paul] to build a Millenium Falcon doll house. In addition to the strangely shaped cutting board, a ring from a CD spindle and some wood slats divide the internals while PVC fittings complete the cockpit assembly. To really bring things alive for the kids [Lin] made a bunch of minifigs from hobby pegs. These exhibit her artistic skills as we think they’re better than most of the stuff you could buy in a store.

Kids really bring out the best in hacking. Looks like these children have been enjoying the spoils of hacker parents for a while, with a cardboard rocketship (beats any refrigerator box hands down), Pixie-Dust bottles using some small LED bits, and a doll bed that repurposes a wine rack.

[Thanks Joby]