Garden Light Turned Mesh Network Node

January 21, 2024 by Danie Conradie 11 Comments

We love a good deal, especially when it comes to scavenging parts for projects. Cheap outdoor solar lights are more than just garden accessories; they’re a handy source of waterproof enclosures, solar panels and batteries. This is demonstrated by [Tavis], who turned one such light into a Meshtastic LoRa communication node.

Solar Light With Meshtastic node inside — Where there’s an antenna, there’s a radio

A nice feature on this specific $15 Harbor Breeze Solar LED is the roomy solar panel enclosure with integrated 18650 battery holder, allowing for easy battery swaps. [Tavis] was able to easily fit the RAKwireless modular dev board, and wire it into the light’s charging circuit. The cheap circuit is likely not the most efficient, but will probably get the job done. It’s always possible to just swap it out with a better charging board. [Tavis] also added an external antenna by using a panel-mount SMA pigtail connector.

The Meshtastic project is all about enabling text-only communications through LoRa-based mesh networks, built using off-the-shelf devices and development boards that won’t break the bank. The project has seen some incredible growth, with people all over the world setting up their own networks.

It’s not the first time we’ve seen garden lights get used in project. We’ve seen MQTT added to a PIR solar light with some clever power saving circuitry, and as a power source for Attiny85-based projects.

Learn Sailing Mechanics Without Leaving Dry Land

January 20, 2024 by Danie Conradie 31 Comments

The ancient art of sailing can be very intimidating for the uninitiated given the shifty nature of wind. To help understand the interaction of wind direction and board orientation, [KifS] designed a hands-on sailing demonstrator that lets students grasp the basics before setting foot on a real sailboat.

The demonstrator uses a potentiometer as a tiller to control a model sailboat’s angle, while another stepper motor adjusts the position of a fan to simulate changing wind directions. With an Arduino Uno controlling everything, this setup affords students the opportunity to learn about sail positioning and adjusting to shifting winds in an interactive way, without the pressures and variables of being on the water.

[KifS]’s creation isn’t just about static demonstrations. It features four modes that progressively challenge learners—from simply getting a feel for the tiller, to adjusting sails with dynamic wind changes, even adding a game element that introduces random wind movements demanding quick adjustments. [KifS] mentions there are potentials aspects that can be refined, like more realistic sail response and usability, but it already achieved the main project goals.

There are a myriad of potential ways to add new tech to the ancient art of sailing. We’ve seen a DIY autopilot system, full sensor arrays, and an open source chart plotter. It’s even been proven you can have a wind powered land vehicle that travels faster than the wind.

How A Steam Bug Once Deleted All Of Someone’s User Data

January 20, 2024 by Maya Posch 14 Comments

In a retrospective, [Kevin Fang] takes us back to 2015, when on the Steam for Linux issue tracker [keyvin] opened an issue to report that starting the Steam client after moving the Steam folder had just wiped all of his user data, including his backup drive mounted under /media. According to [keyvin], he moved the standard ~/.local/share/steam to a drive mounted under /media and symlinked ~/.local/share/steam to this new location on the external drive. He then tried starting Steam, which failed, before Steam crashed and tried reinstalling itself. That’s when [keyvin] realized that Steam had apparently recursively deleted everything owned by his user from the root folder.

The infamous Valve code that made Linux users sad.

In the issue thread, user [doofy] got hit by the same bug when trying to directly start the ~/.local/share/steam/steam.sh script with debugging enabled. He then was the first to point out the rm -rf in that steam.sh script, but since this particular line is in a function only called when Steam tries to remove and reinstall itself to ‘fix’ a botched start, how did this happen? Ultimately it seems to be because of the STEAMROOT variable being set to an empty string, and another unset variable triggering the reset_steam() function, leading to the demise of all the user data.

Since then Valve has presumably fixed the issue, as no further users have filed tickets, but it’s concerning that a similar issue seems to still exist on Windows. Whether or not the original Linux issue has been fixed, it shows clearly how one should always check return values and perhaps, just maybe, never do an automated rm -rf or equivalent.

Continue reading “How A Steam Bug Once Deleted All Of Someone’s User Data” →

The Giant LEGO You Always Wanted To Play With

January 20, 2024 by Jenny List 18 Comments

The interlocking LEGO bricks are probably one of the most versatile toys to come out of the 20th century, but aside from the Duplo larger-sized version for smaller kids, they don’t come in what you might term grown-up sizes. This has not deterred [Veranda Vikings] though, who have come up with the fantastic idea of giant LEGO bricks made from snow.

Making them is simplicity itself given enough depth of the white stuff, simply press the lid of one of those plastic LEGO storage bins into some fresh snowfall hard enough to compact your brick, and then lift clear a perfect icy 2 by 2 brick. Most of the post is devoted to the building escapades of some very happy kids, and we can’t help envying them the opportunity. It appears that like the LEGO fries in the cafe at Legoland in Bilund, these bricks don’t quite interlock. We think that it would be possible to press the LEGO storage lid into the bottom of them though, perhaps some readers would like to experiment.

Either way, this is a hack to warm the hearts of readers worldwide, whether they live in a country with snow or not. We’re surprised Lego themselves haven’t caught on to the idea, and sold giant snow-brick moulds.

HOPE Is On, Spread The Word

January 20, 2024 by Tom Nardi 3 Comments

Since 1994, Hackers on Planet Earth (HOPE) has been on the short list of must-see hacker events in the United States. Held in New York every other year (global pandemics notwithstanding), it’s an event where hackers, makers, artists, and luminaries can meet and swap ideas into the wee hours of the morning. With hands-on demonstrations, art installations, an incredible roster of speakers, and all the Club-Mate you can drink, there really is something for everyone.

Tickets are now available for HOPE XV, which will be held from July 12th to the 14th in Queens. It will once again be held on the campus of St. John’s University, as the historic Hotel Pennsylvania which played host to the con since its inception was converted into a somewhat less luxurious empty lot in 2022.

Continue reading “HOPE Is On, Spread The Word” →

Street Photography, With RADAR!

January 20, 2024 by Jenny List 8 Comments

As the art of film photography has gained once more in popularity, some of the accessories from a previous age have been reinvented, as is the case with [tdsepsilon]’s radar rangefinder. Photographers who specialized in up-close-and-personal street photography in the mid-20th century faced the problem of how to focus their cameras. The first single-lens reflex cameras (SLRs) were rare and expensive beasts, so for most this meant a mechanical rangefinder either clipped to the accessory shoe, or if you were lucky, built into the camera.

The modern equivalent uses an inexpensive 24 GHz radar module coupled to an ESP32 board with an OLED display, and fits in a rather neat 3D printed enclosure that sits again in the accessory shoe. It has a 3 meter range perfect for the street photographer, and the distance can easily be read out and dialed in on the lens barrel.

Whenever the revival of film photography is discussed, it’s inevitable that someone will ask why, and point to the futility of using silver halides in a digital age. It’s projects like this one which answer that question, with second-hand SLRs being cheap and plentiful you might ask why use a manual rangefinder over one of them, but the answer lies in the fun of using one to get the perfect shot. Try it, you’ll enjoy it!

Some of us have been known to dabble in film photography, too.

Thanks [Joyce] for the tip.

Hardware Should Lead Software, Right?

January 20, 2024 by Elliot Williams 26 Comments

Once upon a time, about twenty years ago, there was a Linux-based router, the Linksys WRT54G. Back then, the number of useful devices running embedded Linux was rather small, and this was a standout. Back then, getting a hacker device that wasn’t a full-fledged computer onto a WiFi network was also fairly difficult. This one, relatively inexpensive WiFi router got you both in one box, so it was no surprise that we saw rovers with WRT54Gs as their brains, among other projects.

Of course, some people just wanted a better router, and thus the OpenWRT project was born as a minimal Linux system that let you do fancy stuff with the stock router. Years passed, and OpenWRT was ported to newer routers, and features were added. Software grew, and as far as we know, current versions won’t even run on the minuscule RAM of the original hardware that gave it it’s name.

Enter the ironic proposal that OpenWRT – the free software group that developed their code on a long-gone purple box – is developing their own hardware. Normally, we think of the development flow going the other way, right? But there’s a certain logic here as well. The software stack is now tried-and-true. They’ve got brand recognition, at least within the Hackaday universe. And in comparison, developing some known-good hardware to work with it is relatively easy.

We’re hardware hobbyists, and for us it’s often the case that the software is the hard part. It’s also the part that can make or break the user experience, so getting it right is crucial. On our hacker scale, we often choose a microcontroller to work with a codebase or tools that we want to use, because it’s easier to move some wires around on a PCB than it is to re-jigger a software house of cards. So maybe OpenWRT’s router proposal isn’t backwards after all? How many other examples of hardware designed to fit into existing software ecosystems can you think of?