Imitating Art In Life With A Reverse-Engineered Tattoo

March 23, 2019 by Dan Maloney 6 Comments

In general, tattoo artists are not electrical engineers. That’s fine; the world needs both professions. But when you need a circuit designed, you’re better off turning to an EE rather than a tattoo artist. And you certainly don’t want an EE doing your new ink. Disaster lies that way.

Surprisingly, [Missa]’s tattoo of a heart-shaped circuit turned out at least to be plausible design, even if it’s not clear what it’s supposed to do. So her friend [Jeremy Elson] took up the challenge to create a circuit that looked like the tattoo while actually doing something useful. He had to work around the results of tattoo artistic license, like sending traces off to the board’s edge and stranding surface-mount components without any traces. The artist had rendered an 8-pin DIP device, albeit somewhat proportionally challenged, so [Jeremy] went with an ATtiny85, threw on a couple of SMD resistors and a cap, and placed two LEDs for the necessary blinkenlights. Most of the SMDs are fed from traces on the back of the board that resurface through vias, and a small coin cell hidden on the back powers it. One LED blinks “Happy Birthday [Missa]” in Morse, while the other blinks prime numbers from 2 to 23 – we’ll assume this means it was [Missa]’s 23rd birthday.

There’s a surprising amount of crossover between the worlds of electronics and tattooing. We’ve featured functional temporary tattoo circuits, prison-expedient tattoo guns, and even a CNC tattoo machine.

Continue reading “Imitating Art In Life With A Reverse-Engineered Tattoo” →

EBay Modules And Custom PCBs Make A Plug And Play Ham Transceiver

March 17, 2019 by Dan Maloney 9 Comments

Many of us have fond memories of our introduction to electronics through the “200-in-1” sets that Radio Shack once sold, or even the more recent “Snap Circuits”-style kits. Most of eventually us move beyond these kits to design our circuits; still, there’s something to be said for modular designs. This complete amateur radio transceiver is a great example of that kind of plug and play construction.

The rig is the brainchild of [jmhrvy1947], who set out to build a complete transceiver using mostly eBay-sourced modules. Some custom PCBs are used, but those are simple boards that can be etched and drilled easily. The transceiver is only for continuous-wave (CW) use, which would normally mean you’d need to know Morse, but thanks to some clever modifications to open-source apps like Quisk and FLDigi, Morse can be received and sent directly from the desktop. That will no doubt raise some hackles, but we think it’s a great way to learn code. The rig is QRP, or low power, transmitting only 100 mW with the small power amp shown. Adding eBay modules can jack that up to a full 100 Watts, which also requires adding a 12-volt power supply, switchable low-pass filters, a buck-boost converter, and some bandpass filters for band selection. It ends up looking very experimental, but it works well enough to make contacts.

We really like the approach here, and the fact that the rig can be built in stages. That makes it a perfect project for our $50 Ham series, which just kicked off. Perhaps we’ll be seeing it again soon.

Continue reading “EBay Modules And Custom PCBs Make A Plug And Play Ham Transceiver” →

A Vintage Morse Key Turned Into USB Keyboard

October 3, 2017 by Dan Maloney 23 Comments

Time was when only the cool kids had new-fangled 102-key keyboards with a number pad, arrow keys, and function keys. They were such an improvement over the lame old 86-key layout that nobody would dream of going back. But going all the way back to a one-key keyboard is pretty cool, in the case of this Morse keyer to USB keyboard adapter.

To revive her dad’s old straight key, a sturdy mid-20th century beast from either a military or commercial setup, [Nomblr] started with a proper teardown and cleaning of the brass and Bakelite pounder. A Teensy was chosen for the job of converting Morse to keyboard strokes; careful consideration to the timing of dits and dahs and allowances for contact debouncing were critical to getting the job done. A new wooden base not only provides stability for the key but hides the Teensy and makes for a new presentation. The video below shows it in action; our only complaint is the lack of sidetone to hear the Morse as you pound out that next great novel one click at a time.

Lovingly restored telegraph gear is a bit of a thing around here; we featured this vintage telegraph sounder revived with a Morse code sender not too long ago.

https://www.youtube.com/watch?v=qh_apYcr4xI

[via r/DIY]

Thanks to [Liz] for the tip

Mindstorms Morse Key Writes To Drawbot

July 13, 2017 by John Baichtal 7 Comments

[Jason Allemann] built a Mindstorms Telegraph Machine that packs so many cool details that HaD is about to have a fit.

First off, It’s a drawbot able to write letters, a difficult feat given a lack of native stepper motors and the limited gear options for Mindstorms. Trying to draw letters with servos typically makes for some ugly letters. And how does the drawbot know what to write? You code them in with Morse code. The second video after the break shows [Jason]’s setup. He has a Mindstorms touch sensor with a LEGO Morse key attached to it. He simply taps on the key and the EV3 Intelligent Brick interprets his dots and dashes and translates them into letters.

Next off, [Jason]’s printer is built using one EV3 set. It’s one thing to build a cool Mindstorms robot with whatever you have in your parts bin, but the gold standard is to make a project that can be built with only one EV3 set. That way, anyone with the set can build the project. Precious few really cool projects can be built with just one set–[David Gilday]’s MindCub3r Rubik’s cube solver comes to mind. Dude, this is another one.

Last off, [Jason] breaks down how to build it, providing full LDraw building steps and EV3 code on his site. Even better, he shows how to supersize the project by adding a second EV3 brick, which can connect to the drawbot’s EV3 brick via bluetooth and serve as a standalone CW key. He shows off this part in the second video.

Icing on the cake, [Jason] even built a Morse reference book, done appropriately in 100% LEGO.

Hackaday loves innovative LEGO projects, like this game-playing robot and this LEGO exoskeleton.

Continue reading “Mindstorms Morse Key Writes To Drawbot” →

Vintage Telegraph Sounder Clicks Again

April 6, 2017 by Dan Maloney 8 Comments

It’s sad, when you think about it: a retired railroad telegraph operator, who probably once pounded out code at 40 words per minute, with a collection of vintage sounders silently gathering dust on a shelf. [kthrace] decided to do something about that, and built this Morse sender to bring those old sounders back to life.

As archaic as Morse might seem, it’s a life skill, one the 92-year old former brass-pounder for whom this was built was eager to practice again. There are code practice oscillators, of course, but dits and dahs are no substitutes for the electromagnetic clicks and clacks that once filled this old fellow’s days. There’s not much information on the circuit, but it looks like [kthrace] chose a RedBoard to read Morse from an SD card and drive some relays to support up to four sounders; that’ll make a racket! The case is custom made and nicely complements the wood and brass of the J.H. Bunnell and Co. sounder, which still sounds great after all these years.

Test your Morse skills in the video below – copying code is a lot harder from a sounder than from an oscillator. Find yourself in need of practice? We’ve got you covered.

Continue reading “Vintage Telegraph Sounder Clicks Again” →

Ham Goes Nuts For Tiny Transmitter

February 24, 2017 by Dan Maloney 26 Comments

What’s the minimal BOM for a working amateur radio transmitter? Looks like you can get away with seven parts, or eight if you include the walnut. You’ve got to have a walnut.

Some hams really love the challenge of QRP, or the deliberate use of low-power transmitters to provide a challenge to making long-distance contacts. We’ve covered the world of QRP before and noted that while QRP rigs don’t throw a lot of power, it doesn’t mean that they need to be simple. Some get quite complex and support many different modulation schemes, even digital modes. With only a single 2N3904 transistor, [Jarno (PA3DMI)]’s tiny transmitter won’t do much more than send Morse using CW modulation, but given that it’s doing so from inside a walnut shell, we have no complaints. The two halves of the shell are hinged together and hold a scrap of perfboard for the simple quartz crystal oscillator. The prototype was tuned outside the shell, and the 9-volt battery is obviously external, but aside from that it’s nothing but nuts.

We’d love to see [Jarno] add a spring to the hinge and contacts on the shell halves so no keyer is required. Who knows? Castanet-style keying might be all the rage with hams after that.

Continue reading “Ham Goes Nuts For Tiny Transmitter” →

A Beautiful Morse Key From A Hard Drive Actuator

December 10, 2016 by Jenny List 19 Comments

Morse code, or CW, is a subject that divides the amateur radio community from top to bottom. For some it’s a faded anachronism, while for others it’s the purest form of the art. With it no longer in significant commercial or military use it is radio amateurs who keep it alive, and those for whom it is a passion devote considerable effort to its continuing use.

With well over a century of history behind it there are a huge array of morse keys available to the CW enthusiast. From vintage telegraph keys through WW2 surplus military keys to sideways “bug” keys and modern boutique handcrafted keys, many operators will amass a collection for the love of it, and regularly use them all.

Just one of the hand-drawn illustrations for this project.

Other operators create their own keys, either crafting them from raw materials or using whatever materials they have at hand. Keys have been made from every conceivable piece of junk that will conduct electricity, and made contacts to all parts of the world.

[H. P. Friedrichs, AC7ZL] has produced such a home-made key from surplus material, but it has nothing of the junkbox about it. He’s used the head actuator from a surplus hard drive as the arm of a straight key, and the result is an item of beauty. The actuator bearing is the pivot point, and the business end of the key replaces the hard drive’s heads. The spring is provided by the repulsive force between magnets, the connection at the rear is provided by a piece of guitar string, and the contacts themselves are taken from a surplus power relay. Even his write-up is a thing of beauty, a compelling read with hand-drawn illustrations. If you are not a Morse enthusiast it’s still an engaging project.

We’ve featured many keys here over the years, and this isn’t the first one using a hard drive actuator, as this mint tin paddle shows. Among others we’ve linked you to a collection of unorthodox keys, and of course shown you a vintage telegraph key with a Raspberry Pi decoder.