Desulfator In An Altoids Tin

February 7, 2009 by Caleb Kraft 26 Comments

desulfator

If you’ve ever let a car sit for a period of time and returned to find that the battery was mysteriously “dead”, you were probably experiencing a sulfate crystal build up. Often, people just buy a new battery and plop it in, but that isn’t absolutely necessary. [Kmpres] takes us through the process of building a desulfator. A desulfator works by putting high voltage pulses into the battery forcing the sulfate crystals to dissolve back into the electrolyte. From what [Kmpres] says, you can find “bad” batteries in all kinds of places, use the desulfator on them and have perfectly fine batteries when you’re done. You may recall doing something similar with a disposable camera.

IR Controlled Light Dimmer

February 7, 2009 by Caleb Kraft 14 Comments

dimmer

This is a pretty useful device. It is an IR controlled light dimmer. It goes in line with the main power and controls how much gets through to your light. You can adjust the brightness with a TV remote control. Finally, we can retire our clapper! These are commercially available, but making your own is just so much more fun. You may have to dig a little on their site for the schematics and programming. There are tons of other projects there as well so have fun. You can see a video of it in action after the break.

Continue reading “IR Controlled Light Dimmer” →

OpenVulture, Software For Unmanned Vehicles

February 6, 2009 by Eliot 13 Comments

barbie

The first talk of ShmooCon was [Ethan O’Toole] and [Matt Davis] presenting their OpenVulture software for unmanned vehicles. In the initial stages, they had just planned on building software for Unmanned Aerial Vehicles, but realized that with the proper planning it could be used with any vehicle: airplanes, cars, boats, and subs (or more specifically, their Barbie PowerWheels). The software is in two parts. First is a library that lets you communicate with each of the vehicle’s modules. The second half is the actual navigation software.

They’ve spent a lot of time sourcing hardware modules. They are looking for items that work well, aren’t too expensive, and have a fairly plug and play implementation. For their main processor, they wanted something that wasn’t a microcontroller and could run a full Linux system. The ARM based NSLU2 NAS seems to be the current frontrunner. You can find the opensource software and descriptions of the supported modules on their site.

They’re building the first test UAVs now. One has a 12 foot wingspan for greater lift and stability. We’ve covered the Arduino based Ardupilot and other UAVs in the past.

Fiber Optic Flash Ring

February 6, 2009 by Caleb Kraft 6 Comments

ring

For those who enjoy photography, a ring light is a nice tool to have. Being hackers, making your own seems only logical. This writeup will take you through the process of making one from fiber optics for super cheap. They basically gutted some fiber optic toys and strapped them to the lens. Sure there was a little more work involved, but that’s the gist of it. You may recall some more in depth fiber optic ring lights using LEDs or cold cathodes that we covered before.

[via Hacked Gadgets]

Augmented FPS Gaming

February 6, 2009 by Caleb Kraft 14 Comments

aug

[MikeFez] sent in this info about his augmented FPS set ups. He started this project back with an original XBox in 2006. He wanted a more immersive way of interacting with his games. Pointing out that gaming visuals and interactivity have come leaps and bounds while the controllers themselves have basically just added a few buttons, he explains his goals. He wanted to have to move his body to move his character and possibly physically aim. The original project, for the XBox, was successful in that he used a floor pad to control his character. Since then, the Wii has come out and he has moved to the PC as his main platform. As expected, he is now using the Wiimote as the aiming device.

The 2009 ShmooBall Gun

February 6, 2009 by Eliot 10 Comments

larry

The registration desk hasn’t opened yet at ShmooCon 2009, but we’re already running into old friends. We found [Larry Pesce] and [Paul Asadoorian] from the PaulDotCom Security Weekly podcast showing off their latest ShmooBall gun. ShmooBalls have been a staple of ShmooCon from the very beginning. They’re soft foam balls distributed to each of the attendees who can then use them to pelt the speakers when they disagree. It’s a semi-anonymous way of expressing your dismay physically. [Larry] has been building bigger and better ways to shoot the ShmooBalls for the last couple years. You may remember seeing the 2008 model. This year the goal was to make the gun part much lighter. The CO2 supply is mounted remotely with a solenoid valve and coiled air line. The pistol grip has a light up arming switch and trigger. The gun is fairly easy to transport: the air line has a quick disconnect and the power is connected using ethernet jacks.

TinkerKit, Physical Computing Toolkit

February 5, 2009 by Eliot 5 Comments

tinkerkit

TinkerKit is a collection of 20 different sensors and 10 actuators. It’s meant to make prototyping of physical computing devices much quicker/easier. The devices plug into a Sensor Hub Arduino shield. There is also a similar hub board that can emulate a keyboard; it translates sensor input directly to key strokes. It looks like a very ambitious project and it’s still in development. We love the idea though and think the wide variety of components will foster better final designs. The TinkerKit site covers the current component lineup and there’s a demo video embedded below.

Continue reading “TinkerKit, Physical Computing Toolkit” →